Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.7 LAccepted-AOC 153 T P NAGAR KORBA CG 495677 | KORBA | KORBA | CHHATTISGARH | 495677 | L-1 | Accepted-AOC Accepted as the bidder attains L-1 status | |
| 2 | Rejected-Technical | - | Rejected-Technical Rejected due to non-compliance of confirmatory documents | |
| 3 | Rejected-Technical LIG 5A DEENDAYAL AWAS HOUSING BOARD COLONY KHARMORA KORBA CG 495677 | KORBA | CHHATTISGARH | 495677 | - | Rejected-Technical Rejected due to non-compliance of confirmatory documents |
| Sl No | Description | Qty | Unit | NEW JANTA DENTING WORKS L1 |
|---|---|---|---|---|
| 1.00Repairing and maintenance of Truck mounted mist cannon bearing Reg. No. CG 10 AS 2916. | ||||
| 1.01 | Clutch Plate assembly | 1 | No. | 16,500 ₹16,500 Lowest |
| 1.02 | Release bearing | 1 | No. | 8,000 ₹8,000 Lowest |
| 1.03 | Pressure Plate assembly | 1 | No. | 22,000 ₹22,000 Lowest |
| 1.04 | Fly wheel ring | 1 | No. | 18,000 ₹18,000 Lowest |
| 1.05 | Gear box opening & fitting labour charges | 1 | No. | 3,000 ₹3,000 Lowest |
| 1.06 | Repairing with replacement of Front and rear suspension System (Both side) of 1st, 2nd & 3rd leaf spring, centre bolt, pin, bush, hanger, shackle assly, I bolt, U bolt, washer etc. with tensing work inclusive of material and labour charges. | 6 | Set | 10,500 ₹63,000 Lowest |
| 1.07 | Repairing of Front and rear wheel hub greasing (both side) with replacement of tapper roller bearing (inner & outer), oil seal, check nut and gasket etc. inclusive of material and labour charges. | 6 | No. | 7,500 ₹45,000 Lowest |
| 1.08 | Repairing of Air drier unit and distributor system with brake actuator, brake adjuster, hose etc. inclusive of material and labour charges. | 1 | Job | 25,000 ₹25,000 Lowest |
| 1.09 | Repairing of Brake system (front and rear, both side) with replacement of brake linner with rivet, drum polish lathe work, etc. inclusive of material and labour charges. | 6 | No. | 5,500 ₹33,000 Lowest |
Tender Value
₹13.0 L
EMD Value
₹16,300
Closing Date
6 Aug 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Repairing/replacement/ maintenance of different departmental vehicles at Dipka Expansion Project.
2025_SECL_340187_1
SECL/GM/DA/SO(EnM)/ e-tender/25-26/55 dtd-24/07/25
Open Tender
Electrical and Maintenance Works
Item Rate
45 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
4 documents required · 4 mandatory
₹16,300
6 Oct 2025
25 Jul 2025
8 Aug 2025
25 Jul 2025
6 Aug 2025
26 Jul 2025
25 Jul 2025 - 1 Aug 2025
Amount
Repairing and maintenance of Truck mounted mist cannon bearing Reg. No. CG 10 AS 2916.
Clutch Plate assembly
Release bearing
Pressure Plate assembly
Fly wheel ring
Gear box opening & fitting labour charges
Repairing with replacement of Front and rear suspension System (Both side) of 1st, 2nd & 3rd leaf spring, centre bolt, pin, bush, hanger, shackle assly, I bolt, U bolt, washer etc. with tensing work inclusive of material and labour charges.
Repairing of Front and rear wheel hub greasing (both side) with replacement of tapper roller bearing (inner & outer), oil seal, check nut and gasket etc. inclusive of material and labour charges.
Repairing of Air drier unit and distributor system with brake actuator, brake adjuster, hose etc. inclusive of material and labour charges.
Repairing of Brake system (front and rear, both side) with replacement of brake linner with rivet, drum polish lathe work, etc. inclusive of material and labour charges.
Replacement and fitting of water tank outlet butterfly valve
Diesel Generator Engine - DG Set maintenance with replacement of diesel filter, oil filter, air filter etc. and electrical defective parts.
Repairing of Gear box assly and suspension system along with wheel hub greasing of Tata Truck 1613 bearing Reg. No. CG 12 S 0438.
Repairing of Gear box assly with replacement of drive shaft, main shaft, counter shaft, 2nd, 3rd gear and mesh gear, helical gear, bearing with gasket etc. including material and labour charges.
Repairing with replacement of Front and rear suspension System (Both side) of 1st, 2nd & 4th leaf spring, centre bolt, pin, bush, hanger, shackle assly, I bolt, washer etc. with tensing work inclusive of material and labour charges.
Repairing of Front and rear wheel hub greasing (both side) with replacement of tapper roller bearing (inner & outer), oil seal, check nut and gasket etc. inclusive of material and labour charges.
Repairing/replacement of Gear box assly, clutch system and suspension system of Truck mounted Crane bearing Reg. No. CG 12 U 0194.
Repairing of Gear box assly with replacement of main shaft, 2nd, 4th gear, bearing, gear shifter, synchronizing ring set, lay shaft, gasket and flange with yock assly, teeth, U J cross, centre bearing assly etc. including material and labour charges.
Providing/repairing of Clutch plate, Pressure Plate assembly, fly wheel and gear box opening and refitting labour charges.
Providing/replacement of PTO shaft, teeth, flange, cross, nut bolts with lathe work and extension jack hose.
Repairing with replacement of Front and rear suspension System (Both side) of 1st, 2nd & 3rd leaf spring, centre bolt, pin, bush, hanger, shackle assly, I bolt, U bolt, washer etc. with tensing work inclusive of material and labour charges.
Repairing with replacement of Transmission system and self starter motor of Tata Truck bearing Reg. No. CG 12 BF 3321.
Clutch Plate assembly
Pressure Plate assembly
Fly wheel ring
Gear box opening & fitting labour charges
Repairing of Self starter motor with replacement of armature bush, drive pinion, carbon brush set and rewinding armature.
Repairing with replacement of Transmission system, suspension system and alternator assly of Tata Truck bearing Reg. No. CG 12 BF 3326.
Clutch Plate assembly
Release bearing
Pressure Plate assembly
Gear box opening & fitting labour charges
Repairing with replacement of Front and rear suspension System (Both side) of 1st & 2nd leaf spring, centre bolt, pin, bush, hanger, shackle assly, U bolt etc. with tensing work inclusive of material and labour charges.
Repairing of Transmission system with replacement of flange yoke, UJ kit, center bearing bracket, bearing with rubber inclusive of material and labour charges.
Alternator assly repairing with replacement of Stator assly and rectifier assly, horn inclusive of material and labour charges.
Refilling of Diesel Exhaust Fluid including labour charges.
Repairing with replacement of Transmission system of Mobile service van bearing Reg. No. CG 12 S 1381 A/L.
Clutch Plate assembly
Pressure Plate assembly
Gear box opening & fitting labour charges
Repairing with replacement of Turbo and rear suspension along with strengthening of Dala of Tata Truck bearing Reg. No. CG 12 BJ 5086.
Providing/repairing of Turbo charger opening refitting work inclusive of material and labour charges.
Repairing with replacement of Front and rear suspension System (Both side) of 1st & 2nd leaf spring, centre bolt, pin, bush, hanger, shackle assly, etc. with tensing work inclusive of material and labour charges.
Fabrication and strengthening of dala by cutting, welding, setting etc. and other allied works. (Required plate and angle will be provided by SECL)
Complete Dala inner and outer side two coat primer and two coat duco paint inclusive of material and labour charges
Vehicle writing with material works.
Refilling of Diesel Exhaust Fluid including labour charges.
Providing/repairing of Clutch system, brake work, hub greasing and suspension system with starter motor of Mini Truck bearing Reg. No. CG 12 AR 0403.
Providing/repairing of Clutch plate, Pressure Plate assembly, release bearing and clutch cylinder etc. and gear box opening and fitting labour charges.
Repairing of Brake system (front and rear, both side) with replacement of master cylinder, brake linner with rivet, wheel cylinder, brake adjuster, drum polish lathe work inclusive of material and labour charges.
Repairing of Front and rear wheel hub greasing (both side) with replacement of taper roller bearing, oil seal and gasket etc. inclusive of material and labour charges.
Repairing with replacement of Front and rear suspension System (Both side) of 1st, 2nd & 3rd leaf spring, centre bolt, pin, bush, hanger, shackle assly, U bolt, washer etc. with tensing work inclusive of material and labour charges.
Repairing of Transmission system with replacement of flange yoke, UJ kit, center bearing bracket, bearing with rubber, flange inclusive of material and labour charges.
Repairing of Self starter motor with replacement of armature, field coil, bush, drive pinion, carbon brush set, solenoid inclusive of material and labour charges.
Note: 1). All the required materials will be provided by contractor for fixing. 2). The work shall be carried out at the contractor's workshop.
Total impact of GST for the purpose of CTC
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .