REPAIRS TO JOINERY FALSE CEILING ROLLING SHUTTERS AND ALLIED WORKS TO CERTAIN BLDGS OF MH AND RH KIRKEE AND CERTAIN DEPOSITE WORKS OF CSD DEPOT UNDER GE MH AND RH KIRKEE

Amount

Dismantling of wall and celing b oards (fibre,pulp, insulation etc)or insulation boards/slab /blanket,any thickness including cover fillets all as specified and directed.

M&L 6 mm thick asbetos cement plain building boards fixed to timber frame work/aluminium with screw all as specified and directed

All as per item No 2 above,except board(any thickness)

S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling all as specified and directed.

S&F hangers 6 mm dia GI wire(upto 1200mm length)adjusting level fixd to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long all as specified and directed.

M&L for false ceiling with 19mm thick armstrong ceiling board (SABBIA/DUNE MAX) perforated with regular edge 60x60 cm over and including GI Armstrong grid prelude XL 24mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufactures instructions as specified and directed.

M&L for false ceiling of plain gypsum board of size 600mmx600mmx12mm thick and frame made out of MSGI BPS grade, angle 24mmx24mmx0.43mm, 'T' section 24mmx25mmx0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rail plug providing 1 No per sqm complete with painting two coats of plastic emulsion paint over one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge.

Dismantling timber scantlings 40 sq. cm and over in section (framed work), in any position

S & F rolled sections of Fe-410-W (Gde E-250) quality as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

Dismantling asbestos cement (corrugated, semi-corrugated etc) as in roof coverings and S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof coverings /cladding to wall , fixed with self tapping screws as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated etc) as in roof coverings and S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in ridge portion/eaves gutter fixed with self tapping screws as specified and directed.

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and direccted.

Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

All as per item No 14 above , but exc 2 Sq.m each all as directed

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required , depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed

S &F Pressed steel frame for doors of size 125x 60mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed.

S&F pressed steel frame of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed

M&L PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides all as specified and directed.

S&F 35mm thick (2nd Class hardwood) factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F Steel window (any nos of shutter ) with side hung double shutters one side shutter/shutters to receive glass and other side shutter/shutters to receive guage including projecting type hinges with steel handles, and steel peg stays complete with glazing bars /without glazing bars all as specified and directed.

S&F steel ventilator with top hung shutter double (one for glazing and other for gauging) including hinges steel peg stay complete all as specified and directed.

Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed by Engineer -in -charge.

Taking down old windows of any description and size and S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed

Dismantling aluminium door shutter including assembly exceeding 1.00 Sqm but not exceeding 2.00 Sqm and repair for proper functioning by adjusting moving assembly of floor spring, pivot, hinges etc and re-erecting the shutter including straightening , cutting, tightning of door shutter and making easy movement of the shutter including replacing of mortice lock door, door handles, rubber glass beading all as specified and directed. (Note : Floor springs& mortice locks are measured and paid as seperate items)

Taking down partitions of any descriptions and other similar works and S&F Aluminium partition with powder coated aluminium frame work with standard sections of medium size and weight not less than 1.90 Kg/RM and confirming to catalogue of Jindal or equivalent. The partition shall be fixed with 12mm thick prelaminated particle board with decorative lamination on both sides of approved colour, in bottom panel and with 5.5mm thick glass of approved make in top panel. The frame shall be with one or more rebates including joining cleats , glazing clips , standard rubber beading etc, including fixing properly at floor level and wall / column faces properly complete all as specified and directed .

S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including Frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.incld taking down existing steel ventilator all as directed.

S&F in repair locking arrangements for aluminium doors i.e , by placing new brass lock 4 lever, vertcal type of 65mm , with triplicate key etc complete all as spfd and directed. Make : Godrej,

Supply and fixed in repair 12mm thick, prelaminated particle board , exterior grade , prelaminated both sides with decorative choice laminations etc , all as specfied and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm , all as specified and directed.

S & F 150 mm size extruded aluminium alloy handles, fabricated type anodised all as directed.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm all as directed.

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 300 mm all as directed.

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 200mm all as directed.

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 300mm all as directed.

S&F in repair 150mm stainless steel almirah handle including locking arrangement to built in cupboard all as specified and directed

S&F in repair MS Sheets 1.00mm thick as in shelves (partition of built in steel cupboard ), cut to size including bending or turning up all as specified and directed.

S&F 100 mm Stainless steel butt hinges medium weight, cold rolled all as directed.

S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised all as specified and directed

M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc all as specified and directed.

S&F in repairs PVC cup board knobs 40mm size decorative fancy type with all fixing screws etc complete all as specified and directed.

M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including taking down the existing shutters carefully of any size and description and refixing in the same position including minor repairs as required complete all as specified and directed.

S&F in repairs aluminium extruded section body door closer hydraulically regulated designation No 3 , Universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, all as specified and directed.

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivot flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.

S&F in repairs vertical type venitian blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete as directed by Eng-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

S & F Vitrified ceramic coloured light shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6, all as directed.

All as per item No 55 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 57 as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L Coloured glazed ceramic tiles in vertical surface 300x450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 10 mm thick backing coat in CM 1:4 all as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, all as specified and directed.

M&L for Granite slab 18-20 mm thk machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :6, all as directed.

Supply and fixing 20mm mirror polished granite as in counter top and vertical support fixed with adhessive chemical all as directed by engr in charge at site

Material and labour for rounding of edges of granite all as directed at site.

M&L for drilling of hole in 20mm thick granite for inserting 15mm bore spout.

All as per item No 65 above but for inserting waste coupling of wash basin.

Material and labour for PVC frame work with shutter below counter top as specified in SSR item No 08080 and 08059 all as specified and directed. rounding of edges of granite all as directed at site.

M&L for 20-25mm thk machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including grinding polishing complete laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6, all as directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type B-1 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and using WPC all as specified and directed (Note - WPC will be paid separately)

Supply only water proofing compound

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol all as specified and directed.

M&L for complete removal of existing finishes on walls by scraping down of old decorative surfaces of walls with steel wire brushes of smoke spots, moulds , efforescent salts including filling of spots with POP / Birla putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed

Complete removal of existing treatment from ceiling and applying two coats of oil bound distember emulsion over a coat of primer and wall care putty all as directed by Engr-In-Charge.

Complete removal of existing treatment from ceiling and applying three coats of white wash. All as directed by Engr-In-Charge.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and directed

M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M&L preparation of old plastered surfaces of wall and applying one coats of plastic emulsion over a coat of priming paints, all as specified and directed.

Complete removal of existing treatment from wall and applying two coats of acrylic plastic emulsion over a coat of primer and wall care putty all as directed by Engr-In-Charge.

M&L for complete removal of exixting treatement from wall, preparing the surface including new plasted surface under item No 7 below and applying two coats of weather proof exterior emulsion paint ( Apex ultima or equivalent ) with approved shade and pattern over a coat of primer complete all as specified and directed.

S&F Mild steel guard bars confirming to Fe-410 with ends of bars shouldered and /or riveted , or forged into spikes for window grills complete all as specified and directed.

M&L painting to steel surfaces of any description over 10cm width or girth including preparation of new or untreated surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specifed and directed .

M&L painting to steel surfaces of any description over 10 cm width or girth including preparation of old treated surfaces and applying two coats of synthetic enamel paint all as specified and directed

M & L Preparation of new wooden surface over 10 cm width and girth and applying two coats of paint synthetic enamel over a coat of pink primer all as specified and directed.

Preparation of old surfaces of wood and wood based materials and applying two coats of synthetic enamel paint all as directed by Engr in Charge

M &L Preparation of old wooden surface over 10 cm width and girth and applying one coats of paint synthetic enamel all as specified and directed.

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one all specified and directed

S&F sheet glass 3.0mm thick, ordinary quallity and glazing with oil putty in square n.exc 0.5 sq.m in each pane all as spfd

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified

Taking up or down 15 mm bore steel tubing and connections and S&F 15mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

S&F in repairs stop valves suitables for 15mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed

Fixing only in repairs stop valves, 15mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs Bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed

S&F in repairs bib tap suitable for 15mm bore iron pipe , PTMT any colour, screwed for iron pipe and fixed (Min Wt-90 gms) all as specified

S&F in repair PVC connection of 450 mm length , suitable for 15mm bore pipe with PTMT with nuts all as specified and directed.

S&F in repair PVC connection of 600 mm length , suitable for 15mm bore pipe with PTMT with nuts all as specified and directed.

S&F in repairs vitreous china wash hand basin white size 550x450mm flat back size excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S & F in repairs Wash basins , vitreous China ,Oval shape ,Size 550X400mm including brackets,15mm pillar taps,15mm dia PVC connection 600mm long and waste pipe of 32mm dia all as specified and directed

Taking down existing wash basin of any descreption and supply and fixingsnow white counter top wash basin with CP waste coupling ,waste pipe etc all as directed by Engr in Charge.(Make :Cera,cat No S 2020106)

Supply and fixing CP Swan neck spout for table top wash basins (Make Cera,cat NoF 2003104)with and including PVC connection with brass nut and connection to pipe line of 15mm bore

Supply and fixing CP angle cock 15mm bore(Make:CERA,cat NoHT F 3001202)

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstain heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe all as directed.

S&F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern or flush pipe) pedestal pan and trap including Plastic water closet seat cover white, closed pattern with flat bottom and cover with mild steel hinge chromium plated including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc., complete and all as specified and directed.

Taking down of existing pedestal pattern water closet and supply and fixing one piece pedestal pattern water closet,snow white shade and make it functional smoothly (Make: Cera cat No 20107 or Belmonate floor mounted

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge. (Make Prayag or equivalent)

All as par item No 109 above but size 600x450mm

Supply and fixing CP Towel rail 60cm long D type

Supply and fixing 5mm thick looking mirror of size 600 x 900mm with wooden frame work and fixing brackets etc

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as directed.

S&F in repairs Health faucet brass chromium plated two way bib tap with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe all as directed.

Dismantling water tanks and removing to store and S&F in position of rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), triple layered, white coloured of capacity 500 litre in position all as specified and directed.

All as per item No. 115, here-in-above but water storage tanks of capacity 1000 litre.

M&L for Painting lines, dashes, arrows, letters , etc on roads, pavements and the like exc 10 cm wide with two coats of synthetic enamel paint , white or golden yellow, all as specified and directed

Taking down existing roof treatement of any description including cement plaster below the treatment and removing the debris to a distance exceeding 50 mtr.

M& L cleaning the plasted /concrete surface with wire brush and applying water proofing treatement as under : (a) Apply a uniform coat of bitumen primer @ 0.70 Kg/Sqm over cement plaster (b) Providing and applying 3mm thick and weighing not less than 3.6 kg /sqm (APP) modified bitumen based pre fabricated five layer water proofing membrane reinforced with non woven polyster matt black finished by torch application of membrane with 10 cm over lape both ways after necessary prepration of surface complete as menufacture instrutions. (c) Apply two coats of bitumatic aluminium paint over membrance.

M&L for rendering 15 mm thick in CM 1:4 on concrete surface (roof) mixed with water proofing compound finsined even and fair.

Taking down existing cement plaster from wall and rendering 15mm thick plaster in CM1:4 finised even and fair all as specified.

M&L for waterproofing treatment to RCC sunken slab as specified below. (a) creating fillet coving of 50mmX50mm with polymer modified mortar using cement : sand : URP (b) Applying PU sealant at the junction of pipes and the RCC sueface. (c) Apply1st coat of two component cementitious coating, over the surface and taking the coating on the walls over the angle fillet / wattaupto 1M. (d) Lay 40gsm geotextile fleece at the watta portion. (e) Apply 2nd coat of two component cementitious coating, over the first coat and taking the coating on the walls over the angle fillet / watta upto 1M after 6 -8 Hrs. (f) Applying 12mm thick plaster in C:M 1:3 with waterproofing compound conforming to IS 2645:2003 @ 250ml per bag of cement. Make: PIDILITE or equivalent.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

Making hole and M&L for fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

Open the fittings like Y, bend, Tee etc from the outlet pipe filing properly the loose joint between bend and outlet pipe with solvent and fixing properly to ensure leakage free joint and making good

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

M&L for hardcore of broken stone of gauge n.exc 63mm deposited , spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base, all as specified.

M&L for 40mm thick PCC type B-1 , 1:2:4 (20mm graded aggregate ) as in flooring all as specified and directed

M&L for PCC 1:3:6 type C-1 , 75 mm thick as in plinth protection all as specified and directed

S&F in repair 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. Make :- Jaguar or equivalent Cat Part No FUS- 29273UPR

S&F in repair 'U' Shaped rail, wall mounted rail (with hinges) 600x100mm , stainless steel base, sleeved with contour finished nylon for grip of load bearing capacity 150 Kgs , anti bacterial surface (Model No : 2506) Make : CERA

Cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes etc not exceeding 250 litre capacity all as specified and directed.

All as per item No. 134 above but tank capacity exceeding 250 litre and not exceeding 500 litre all as specified and directed.

All as per item No. 134 above but tank capacity exceeding 500 litre and not exceeding 1000 litre all as specified and directed.

All as per item No. 134 above but tank capacity exceeding 1000 litre and not exceeding 2000 litre all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm bore , double socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F in repair bends any radius of bore 110mm all as spfd and directed

S&F in repair of Ball valves of PTMT, 15mm bore of pipe, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed all as specified and directed.

All as per item No 140 above but for 20mm bore of pipe of specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S & F in repairs PVC (SWR) multi floor trap with grating 75mm outer dia including jointing with solvent cement all as specified and directed.

S&F in repairs Trac ceiling by installing round edge panels 84mm widthx16mm deepxlength upto 5Mtr formed from 0.50mm thick aluminium alloy IS-31000/AA 3105 with stove enamelled coil coated on the exposed ide as per standard colour shade ,the aluminium flush profile shall be inserted in 16 mm gap between the panels (close type)&25 mm glass wool, panel carrier 32mm wide ,39mm deep made of 0.60mm galvanised steel upto 5Mtr made of double backed enamelled block with cut out to hold on panel in a module of 100mm close, the carries shall be suspended from slab by J hook and 4mm dia galvanised rod with special height adjustment clips made out of GI sheet at max 1.20m centre to centre, the edge profile aluminium shall be matching with the panel complete all as specified and directed. Make: Interach, Armstrong, M/s MG Industries Faridabad.

Demolition of concrete of any description and in any position (Sunken floor).

M & L cement concrete type E2 (1:5:10) 40 mm graded aggregate as in filling.

S & F repairs vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rests.

MAHESH DADAJI BACHHAV

JP ENTERPRISES