NIT NO. 102/Durg(Khairagarh)/2026

NIT Schedule for A/R Work for Residential and Non Residential Buildings under Sub Division Khairagarh.

Name of Works :-

1 Sub Jail Building Saloni, Polytechnic Khairagarh, Collector Office, Court Building,

2 H.S.S. building Mandrakuhi, Gatapar and Khairagarh

3 S.P. Office, P.W.D. Rest House , P.W.D. Division Office and P.W.D. Sub Division Office,

4 Civil Line G-Type 1 to 3, H-Type 3 to 7,

5 Post Office Building Khairagarh, B.T.I. Building, B.E.O. Office Building at Khairagarh

Sor for building works with effect from 01.01.2015 PAC Rs 25.00 Lacs

S. No. Item No Particulars QTY Unit Rate Amount

1 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 20.00 cum 263.00 5260.00

2 16.10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 50.00 sqm 13.50 675.00

3 16.18 Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the materials with 50 m lead. 50.00 sqm 16.50 825.00

4 16.20.1 Dismantling wood work in frame, trusses purlins and rafters etc upto 10 metre span and upto 5 metre height above plinth level including stacking the material within 50 M. Lead Of sectional area 40 sq. cm and above 2.50 cum 894.00 2235.00

5 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 20.00 each 100.00 2000.00

6 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 30.00 each 66.50 1995.00

7 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 18.00 each 46.50 837.00

8 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 30.00 each 33.50 1005.00

9 16.31 Dismantling steel work in built-up section in angles, channels, flats Isection and T-section including all gusset plates, bolts, nuts, cutting rivets,welding etc., including dismembering and stacking within 50 metres lead. 1800.00 kg 1.00 1800.00

10 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 250.00 sqm 22.50 5625.00

11 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 610.00 sqm 11.00 6710.00

12 16.43.1 Demolishing cement concrete including disposal of material within 50 ,metres lead. 1:4:8 or leaner mix 8.00 cum 329.00 2632.00

14 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. Wash basin of all sizes and shapes 8.00 each 30.50 244.00

15 16.53.2 Urinals of all sizes and shapes 8.00 each 38.00 304.00

16 16.53.3 European/ Anglo Indian WC pan of all sizes 5.00 each 46.00 230.00

17 16.53.4 Cysten of all sizes and shapes 8.00 each 34.50 276.00

18 17.10 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : 850.00 sqm 132.00 112200.00

19 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soils. 40.00 cum 185.00 7400.00

20 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All types of soils 40.00 cum 26.50 1060.00

21 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc.complete: 110.00 cum 371.00 40810.00

22 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 55.00 sqm 139.00 7645.00

23 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 32.00 sqm 297.00 9504.00

24 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 44.00 sqm 235.00 10340.00

25 2.1.8 Beams, lintels, cantilevers & walls 25.00 sqm 202.00 5050.00

26 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 10.00 sqm 230.00 2300.00

27 2.1.13 Weather shade, chhajja, Cornices and mouldings 15.00 sqm 294.00 4410.00

28 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 25.00 cum 2970.00 74250.00

29 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 9.00 Cum 4163.00 37467.00

30 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 5.00 Cum 97.50 488.00

31 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 500.00 kg 54.50 27250.00

32 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work 3.00 Cum 4237.00 12711.00

33 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 15.00 cum 3817.00 57255.00

34 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 80.00 Cum 3263.00 261040.00

35 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 80.00 Cum 121.00 9680.00

36 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 80.00 Sqm 382.00 30560.00

37 7.12.2 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: 80.00 Sqm 11.00 880.00

38 8.2.2 Providing wood work in frames of false ceiling, partition etc. sawn and put in position with main batten 125x50mm (nominal) and cross batten 50x38mm (nominal) both at spacing of 600mm center to center. Sal, bijasal, benteak, khair, haldu 0.80 cum 62544.00 50036.00

39 8.8.2 Providing and fixing 30mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) Bijasal, benteak, khair, haldu 30.00 sqm 1397.00 41910.00

40 8.14.3 Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges. 30 mm. thick (single leaf) 30.00 sqm 1514.00 45420.00

41 8.52.1 Providing, and fixing M.S. round and square bars with MS flat of required pattern in wooden frames for windows & clerestory windows including applying a priming coat of red oxide zinc chromate primer, welding etc complete Plain grill 275.00 kg 68.00 18700.00

42 8.152.1 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter 20.00 sqm 2318.00 46360.00

43 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 Steel work welded in built up sections/ framed work including cutting 450.00 kg 88.50 39825.00

44 9.6.1 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 210.00 kg 70.00 14700.00

45 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 200.00 kg 75.00 15000.00

46 9.47.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately) 310.00 kg 338.00 104780.00

47 9.50.1 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. With decorative lamination on one side and balancing lamination on other side. 50.00 sqm 845.00 42250.00

48 10.1.2 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 0.80 mm thick sheet (weight 7.03 kg/m2) 60.00 sqm 810.00 48600.00

49 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 100.00 sqm 636.00 63600.00

50 10.5.2 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete, 0.80 mm thick sheet with zinc coating not less than 275 gm/sqm 25.00 Metre 533.00 13325.00

51 10.1 Extra for providing and fixing wind ties of 40x6mm flat iron section. 30.00 Metre 118.00 3540.00

52 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 30.00 sqm 347.00 10410.00

53 10.22.1 Providing and fixing ridges and hips in asbestos cement sheet roofing with G.I., J or hooks, bolts and nuts 8 mm dia, G.I plain and bitumen washers complete. Plain angular ridges 18.00 Metre 54.50 981.00

54 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut andbolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting 70.00 sqm 658.00 46060.00

55 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 250.00 sqm 91.50 22875.00

56 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 250.00 sqm 107.00 26750.00

57 11.5 Neat Cement punning. 32.00 sqm 33.00 1056.00

58 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. 70.00 Kg 43.50 3045.00

59 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 110.00 sqm 254.00 27940.00

60 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 50.00 sqm 587.00 29350.00

61 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 50.00 sqm 692.00 34600.00

62 12.79.1 Providing and laying double/ multi charge (minimum 2.0mm thick layer) vitrified floor tiles with water absorption less than 0.05% and conforming to IS : 15622-2017 of first quality of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to 10 mm 90.00 sqm 1082.00 97380.00

63 12.65.1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 100.00 sqm 436.00 43600.00

64 14.51 Providing and applying 2mm thick ready mix exterior grade putty (manufactured with Cow dung processing) on walls to make the surface smooth and even. 520.00 sqm 101.00 52520.00

65 14.5.1 White washing with lime to give an even shade. On new work (Three or more coats) 300.00 sqm 9.40 2820.00

66 14.5.2 On old work (Two or more coats) 498.00 sqm 5.50 2739.00

67 14.7.1 Colour washing such as green, blue or buff with lime to give an even shade. On new work (two or more coats) including a base coat of white washing 150.00 sqm 12.00 1800.00

68 14.7.2 On old work (Two or more coats) 150.00 sqm 5.60 840.00

69 14.48.1 Distempering with Washable Distemper manufactured with the cow the dung processing to give an even shade. On New Work (One or more coats ) 300.00 sqm 53.00 15900.00

70 14.48.2 On old work (one or more coats) 450.00 sqm 30.00 13500.00

71 14.22.2 Painting on new work (two or more coats) to give an even shade with: Premium synthetic enamel paint 180.00 sqm 47.00 8460.00

72 14.23.2 Painting on old work (one or more coats) to give an even shade with: Premium synthetic enamel paint 300.00 sqm 30.00 9000.00

73 17.6.1 Providing and replacing broken floor tile with vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, grouting the joints with white cement and matching pigments etc. complete: Size 600x600mm 60 sqm 1611.00 96660.00

74 8.165 D-4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 15 sqm 7261.20 108918.00

75 8.165 D-3 Two Track two panels sliding window made of (big series) frame 67*50mm and sash 46*62 mm both having wall thickness of 2.3+.2 15.000 sqm 5826.05 87391.00

76 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat 0.00

78 19.5.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 32 mm nominal outer dia .Pipes. 45 metre 284.00 12780.00

79 19.5.1 15 mm nominal outer dia .Pipes. 65 metre 133.00 8645.00

80 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 40 each 382.00 15280.00

81 19.14.4 Piller Cock (400 grams) 20 each 398.00 7960.00

82 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 13 set 774.00 10062.00

83 18.18.5 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Oval or round size 550x400mm. 12 each 1131.00 13572.00

84 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 5mm thick mirror 15 sqm 2016.00 30240.00

85 18.26.1 Providing and fixing PVC waste coupling in wash basin/ sink. 25 mm 30 each 49.50 1485.00

87 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 30 each 113.00 3390.00

89 18.25.1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 30 each 68.50 2055.00

90 19.14.7 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Angle valve for basin mixer and geyser points (450 grams) 30 each 382.00 11460.00

91 19.14.10 Wall mixer with elegant knob (1400 grams) 10 each 1787.00 17870.00

92 19.14.15 Shower rose (revolving type) (150mm) 10 each 269.00 2690.00

93 19.14.6 Stop cock (concealed) (600 grams) 30 each 494.00 14820.00

94 19.12.4 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32 mm nominal bore. 40 each 248.00 9920.00

95 18.2.1 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: White Long pattern W.C. pan of size 580 mm 10.00 Each 999.00 9990.00

96 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 10.00 Each 2882.00 28820.00

97 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete White 10.00 Each 729.00 7290.00

98 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 15 mm dia. nominal bore 80.00 Metre 149.00 11920.00

99 19.7.3 25 mm dia. nominal bore 80.00 Metre 258.00 20640.00

100 19.7.4 32 mm dia. nominal bore 25.00 Metre 318.00 7950.00

101 19.8.1 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 110.00 Metre 188.00 20680.00

102 19.8.2 20 mm dia nominal bore 110.00 Metre 221.00 24310.00

103 19.8.3 25 mm dia nominal bore 65.00 Metre 297.00 19305.00

104 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 50.00 Each 382.00 19100.00

105 19.14.4 Piller Cock (400 grams) 20.00 Each 398.00 7960.00

106 19.14.6 Stop cock (concealed) (600 grams) 25.00 Each 494.00 12350.00

107 19.9.1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 50.00 Each 131.00 6550.00

108 19.9.2 20 mm dia. nominal bore 20.00 Each 159.00 3180.00

109 19.9.3 25 mm dia. nominal bore 25.00 Each 222.00 5550.00

110 19.9.5 40 mm dia. nominal bore 30.00 Each 308.00 9240.00

111 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 50.00 Each 51.00 2550.00

112 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 5.00 Each 754.00 3770.00

113 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 Each 4644.00 18576.00

114 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 30.00 Each 200.00 6000.00

115 19.10.3 40 mm nominal bore 20.00 Each 278.00 5560.00

116 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 3200.00 Litre 7.30 23360.00

SAY IN LAKH RS. 25.00 -499572.70