Construction of display wall made of auto components products in the premises of Mini Secretariat and District Industries and Commerce Centre, Alwar.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Refebrication work with existing steel work including cutting, welding & refebrication as per requirement with fixing at site complete as per direction of Engineer In charge

Varnishing with varnish of approved brand and manufacture Two or more coats glue sizing with spar varnish or an under coat of flatting varnish

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work.

Providing and fixing in position wall panelling at all heights with intergral densified calcium silicate panels/tiles of size 595x595mm, having NRC (Noise Reduction coefficient) of 0.50 minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6& 7), Humidity resistance of 100 %, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) Sqm 2609.00 i.e. vertical studs of size 48x34x36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50x32m fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. The joints between the panels are to be duly jointed and finished using recommended jointing calcium sillcated based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direcrtion of Enginner-in- Charge all complete.

Please Enable Macros to View BoQ information