Construction of Divisional Store Office Building of ED-II, Rajbagh at Bemina (Balance Works /left over work ) under Capex Budget 2025-26

Amount

Main Building works:-

Brick work with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) - 2nd Floor -3ft high Bed and side Gabled below truss structure

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Qty Vide Item No. 1

Providing wood work in frames of windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood (using 4mm thick float glass panes)

Providing and fixing of 3.5 mm thick float glass panes

providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge:

15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar)

12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and applying white cement based wall putty of avg.2mm of approved brand and manufacture

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(Interior Finishing)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 litter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded (with base plates and bolts of requisite size)

Providing colour coated Hi-rib profile sheet roofing of approved brand & manufacture, fixed with polymer coated steel screws bolts 100 mm long 8 mm dia with washers & plc. cap (upon a pitch of 60 degrees) excluding the cost of purloins, rafters and trusses (0.50mm thick)

Providing colour coated Hi-rib profile sheet ridges or hips of width 60cm overall width plain colour coated sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.

Providing and fixing of steel railing with 2 inch steel pipe (1.2mm thick) having weight of 9 kgs per 20 feet . This job includes stair posts having 900 gms weight per post and small pipes of dia 5/8 (2.75 kg per 20 feet) and 4 No main posts ( as per sample providedProviding and fixing of bright finished brass hardware fittings byProviding and fixing of bright finished brass hardware fittings the department) for 2 stair cases --- Complete Job

Providing and fixing of bright finished brass hardware fittings - 125 mm Handle

Providing and fixing of bright finished brass hardware fittings- 100x10mm Tower bolt

Providing and fixing of bright finished brass hardware fittings-Stay hooks

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Udaipur green marble/zebra

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.Extra carriage from 5 K.m up to 20 K.m Budgam

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density)

Providing and laying granular sub-base material having P.I not more than 6, incl. spreading in layers not exceeding 150mm compacted thickness and consolidation by 8-10 Ton power road roller at OMC to achieve at least 98% of max dry density as per IS..2720 to the required and grade. Grading-I as per specifications with CBR value not less than 20.incl all leads lifts, carriage, taxes Octroi etc..

Providing and fixing of 400x400x16mm Non-skid Vitrified Tiles over 20mm 1:4 cement mortar, incl. filling of joints with neat cement mixed with pigment to the required shade.

Carriage of materials Sand Avg. 20K.m

Carriage of materials Bricks Avg. 30K.m

Providing and fixing of GI water Pipe size (3/4'' ) B Class for water Connection (pipes) with joints / bends/elbow complete job including excavation and backfilling

Septic Tank & Soakage pit :-

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. In all kinds of soil septic=12’0”x8’0”x7’0”

Providing & laying in Position cement concrete 1:4:8 graded crushed stoneaggregate 40mm excluding the cost of centering and shuttering. All works upto plinth level. 12’0”x8’0”x0.50

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Raft 12’0”x8’0”x0.50

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Slab 12’0”x8’0”x0.50

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) L/W 2x12’0”x6’.0”x0.75 : S/W 2x6’.6x6’.0”x0.75

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) 2x6’.6”x5’.0”

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for

i) Suspended floors, roofs, landings, balconies and access platforms

ii) Edges of slabs and breaks in floors and walls

CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.Circular shape 560mm internal diameter

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets

Providing and fixing of PVC pipes/ fittings of approved make and quality (prince or finolex) ISI quality of following diameter:

pipe 100mm dia

pipe 150mm dia

collar 100mm

collar 150mm

plain bend 100mm

plain bend150mm

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate /Sand for an avg. lead of 12 Kms

Bricks for an avg. lead of 28 Kms

Electrical and other works:-

Providing and fixing of concealed LED lights 12 Watts (Havells/Legrand/Philips make)

Providing and fixing of 300 mm shutter type Exhaust Fan , vibration free, maintenance free, thermal overload protection double ball bearing fan

Providing and fixing of Electric Gyser of 50 Ltrs (along with connection pipes) with following parameters Energy Saving : 5 star certification by BEE Provision of temperatue regulation by means of external knob 220/230 V , 50 Htz Single phase220/230 V , 50 Htz Single phase 4. Max rater pressure : 8 bar 5. body type : Rust, water and shock proof body with corrosion resistant tank made up of cold rolled steel, resistant to hard water 6. Element typr: Glass coated heating element 7. Safety Valve ( Max pressuer 8 bar) 8. It should have high density PUF insulation for energy efficeincy 9. Anti syphon system to prevent back flow of water 10. should have indication lamps for ON/OFF/CUT OFF 11. Confirming to IS 2803:2018, IS 302-1, IS 302-2-21

Providing and fixing of LED bulk head lights 20 Watts IP66 (Havelss/philips/bajaj)

Providing and fixing of 1 HP single phase motor with necessary accessories

Providing and fixing of Ceiling Fan (48 inch) 4 blade Superior quality (BLDC

Providing and fixing of Modular Switches 10 Amps (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular Indicator (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular 3 Pin International Socket 10 Amps (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular 16 Amps International Socket (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular 16 Amps Switch (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular Fan Dimmer (switch type) (Legrand/schinder/Anchor Roma)

Providing and fixing of Modular Push bell switch (Legrand/schinder/Anchor Roma)

Providing and fixing of Door Bell ( Wireless type)

Providing and fixing of Modular plate (6 way)

Providing and fixing of Modular plate (4 way)

Providing and fixing of Modular plate (8way)

Providing and fixing of Modular plate (2 way)

Providing and fixing of 3 ftx 7 ft Signage boad ( LED Backlit Glow Sign Board) Office Name with Address with Telephone Nos and contact emails as per Description of Officer Incharge (for ESD Stores Divisional Office IInd Rajbagh)

Providing and fixing of Executive chair / big boss's ergonomic plush, ultra-luxe, high back chair preferably with a headrest, superior lumbar support, 360° swivel option

Providing and fixing of Office Chairs (Visitor Chair) with arm Rest with Steel Frame and cushoined seat Back Chair Without Wheels Black (Non-Revolving and Non-Tilting chair with Armrest)

Providing and fixing of Modular Dark Brown Wooden Office Boss Table L Shape Diameter: 1800x900x750 mm or higher

Providing and fixing of Modular Wooden Computer Office Table Medium Size Shape Diameter: 48 inch/24 inch or higher (with drawers)

Providing and fixing of King size Bed in Planked Walnut Finish with Upholstered Headboard- (Non Storage type) (Sofa Back- leathered ) with matteress, Bed sheet, Electric Blanket (Double Size), Mink Blanket and 2 pillows with pillow covers

Providing and Fixing of Window/ Door Curtain Rods ( Stainless Steel Pipe)

Providing and Fixing of Steel Finials (ends of cutrain rods) and Brackets along with screws/ gatties required for fxing the same

Supply of Doormats( Superior Quality) MATERIAL: PVC PRODUCT DIMENSION: 58 X 38 X 1 CM or higher

Supply of Dustbins Plastic Pedal Garbage Waste Dustbin, 20 Litres

Supply and fixing ofWindow / Door curtains (superior quality)

Supply and fixing of Quartz Wall Clock (32 cm x 32 cm x 3.5 cm, White) (Ajanta or similar)

Supply of Mop with Big Wheels and Stainless Steel Wringer, (Aqua Green, 2 Refills) Extendable Mop Handle with 360 Degree Movement, Sturdy Steel Wringer.Liquid dispenser Usage Wet and Dry both, Easy to Use, Store and Carry Extendable Mop Handle with 360 Degree Movement, Multipurpose Use - Cleans Liquid, Oil, Dust, and Bacteria Bucket flexible Handle helps in easy lifting the Bucket, Side Bucket Handle to Slide the Bucket on Wheels

Supply of Telescopic Floor Wiper | Durable, Ergonomic, and Efficient Cleaning Solution

Supply of Comfortable, Ultra-Light, Stylish and Trendy Flip Flops

Supply of 3 Shelves Shoe Stand Rack Shelve Storage Rack Steel Dust-proof for Footwear (8D x 60W x 62H Centimeters)

Supply of Plastic Bucket Set of 6-Pieces - Bucket (25 litres) with Mug (1.5 litres),Basin (20 litres),Dustbin (14 litres), Stool & Soap Case

Supply of Infrared Cooktop PIRC 1.0 | 2200W, Stainless Steel & Ceramic | Adjustable Temperature Control | Cool Touch Handle | 1-Year Warranty

Supply of LPG Gas Stove ( 2 Burner with Cyliner and pipe)

Shifting / Reshifting of poles and allied material :-

Temporary Shifting of Poles and allied materials like meter boxes,meter cabinets etc from Store premises to nearby location to pave way for filling of local earth and granular sub-base material and reshifting/ stacking/organizing the same back post filling of the land area (100x55 mm area). ( Bidder to visit the stores to check the shifting quantity). NOTE:- In view of the limited space, phased wise shifting and filling alongwith Macdamization shall be carried out

Deweeding including uprooting rank vegetation, grass, brushwood trees and saplings of grith upto 30cm measured at a height if 1mtr above ground level and removel of rubdish upto distance of 50mtrs out site the periphery of the area. including Cutting of Trees (6-8 Nos) Area (100x55 sqmm)

Yard Lighting (Erection of poles along with fixing of luminaries including Cement Bottoming (0.4cum/pole) and pole painting - Plantation depth 1/6th of pole length. ( Poles, brackets , luminaries, wire to be supplied by Department).

Supply and Fixing of Roll of Honour (Black Acrylic material) (with KPDCL logo with names of AEES printed) size 8 ft x 3ft

Chain Link Fencing of front side (approx 60 ft long) with 2 No. sliding Gates with item detals as under:-

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. In all kinds of soil

Providing and laying in position cement concrete of specified grade including curing and cost of centring and shuttering using 1:2:4 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position using structural steel etc. as required :In sliding gates 2 No., gratings, frames, guard bar, railings, brackets, and similar works

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Providing and painting of the steel work by way of applying priming coat and synthetic enamel paint of approved brand to give even shade

Macdamization of approach road/inner path (12ft w x130mtr L) of ED store Bemina by way of Providing and laying WBM G-II, 75mm WMM, 50mm thick bituminous macadam, 25mm thick semi dense with 6mm thick seal coat:-

Supplying, stacking and laying spreading and compacting crushed stone aggregate of 63-45mm size to Water Bound Macadam specifications in uniform thickness hand picking rolling with 3 wheeled road/ vibratory roller of 8-10 ton capacity in stages to proper grade and chamber applying and brooming 13.20mm type A bscreening/ binding material to fill up interstices of coarse aggragate watering and compacting to required density (finished work to be measured 75mm thick compacted thickness) incl carriage of materials as involved complete

Providing, laying, spreading and compacting 75mm thick graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specifications incl premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, for all leads and lifts, lying in uniform layers with mechanical paverfinisher in sub base/ base course on well prepared surface and compacting with vibratory roller of 8-10 tonne capacity to achive the desired density, complete as per specifications and directions of Engineer in-charge.

Providing and applying tack coat using hot run straight bitumen of grade VG-10 including heating bitumen, spraying the bitumenwith mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On Wmm @ 0.758 kg/Sqm

Providing and laying of 50mm thick bituminous macadam with bitumen of grade VG-10 @ 3.50% (percentage by weight of total mix) prepared in Drum/ batch type hot mix plant using crushed stone aggregate of specidied grading with bituminous binder, transport to site by tippers, laid over a previously prepared surface with paver finisher equpped with electronic sensor to the required grade, level and allingment and rolling with smooth wheeled vibratory and tandem rollers as per specification to achieve the desired compaction and density as per specifications and directions of EIC

Providing and laying semi dense bituminious concrete of 25mm compacted thickness with bitumen of grade VG-10 @5% (percentage by weight of total mix) and lime filler @2% (percentage by weight of aggregate) prepared in Drum/ batch type hot mix plant using crushed stone aggregate of specidied grading with bituminous binder and filler,transportinfg the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to rerquired grade, level and allingment and rolling with smooth wheeled vibratort and tandem rollers to achieve the desired compaction and density as per specifications complete and as per directions of EIC

Providing and laying 6mm thick seal coat of premixed fine aggregate(passing 2.36mm and retained on 180 micron sieve) with bitumen using 128kg of bitumen of grade VG-10 bitumen per cum of fine aggregate of grade and 0.6 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page -Pre and Post)

MOHAMMAD RAFIQ RATHER (BID ID -2453842)

SAJAD AHMAD BHAT (BID ID -2441404)