Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹11.2 L+₹2.0 L (21.2%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹12.5 L+₹3.3 L (35.5%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
21 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT
REPAIR/ MAINT AND CLEANING OF OVERHEAD RESERVOIRS, TANK INDICATOR INCLUDING WATER CONNECTED WORKS AT AF STN BKT
2022_MES_526026_1
8615/BKT/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹30,000
Yes
12 Aug 2022
24 May 2022
23 Jun 2022
24 May 2022
21 Jun 2022
7 Jun 2022
60 days
Amount
Excavation in trenches not exceeding 1.5mtr wide & not exceeding 1.5 mtr deep for laying pipe lines etc & getting out in soft /loose soil including forming bottom surface to required level or slope complete all as specified and directed by EIC.
Returning , filling in trenches (Soft/Loose soil) in layers not exceeding 25 cm thick after laying of pipe including spreading, levelling & well ramming including watering as required all as specified and directed by EIC.
Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point all as specified and directed by EIC.
M&L for GI tubing 15 mm dia bore medium grade complete with all fitting laid in trench or fix on wall/floor including taking up or down old u/s steel tubing and connection complete all as directed. Make : Jindal/QST/Parkash/Tata.
-ditto- all as item No 4 above but 20 mm dia bore
-ditto- all as item No 4 above but 25 mm dia bore
-ditto- all as item No 4 above but 50 mm dia bore
-ditto- all as item No 4 above but 80 mm dia bore
Supply & Laying Ductile iron pipes single socket including special class "K-7 with spigot and socket ends centrifugally in any length laid in trenches for 100 mm dia bore sizes including taking down old us CI/DI pipe complete all as specified and directed: Make :- Electrosteel/Jindal/TATA
-ditto- all as item No 9 above but of 150 mm dia bore.
M&L for cleaning 50000 gallon of RCC over head tanks (installed on stagging) comprising of the following operations :- (a) Dewatering of the tank shall be carried with gravitational flow. (b) Removal of left over dirty water and sludge with suitable sludge removal pump. (c) Cleaning of internal walls, floor, ceiling of tank shall be carried out by high pressure water jet. Pressure of machine shall not be less than 80-120 bar and ensure that no dirt, algae or moss remain on surface of tank. (d) Remaining sludge shall be removed from the floor with the help of industrial vacuum cleaner. (e) Tank shall be sterilized by spraying anti bacterial agent using same high pressure machine. (f) Date of cleaning and capacity of tank will be written on OHT with synthetic enamal paint.
Ditto all as item No 11 above but 22,000 gallon Overhead tank
Ditto all as item No 11 above but 10,000 gallon Overhead tank
Ditto all as item No 11 above but 5,000 gallon Overhead tank
M&L preparation of old surfaces of RCC over head tank installed on stagging with one coat of exterior emulsion wheather coat paint complete including neccessary scaffoldings of temporary bamboo structure for one coat of white wishing to OH tanks & preparation of old steel painted surface & applying on coat of to stagging/steel ledders and vertcal /down pipe lins with one coat of synthetic enamel paint as per colour code including preparetion of surface and removing all fly/honey bee/insects etc from the outer surface of OH tanks, all as directed for 50000 gallons capacity overhead take stagging of appx height 16 mtr from GL and appx area 101.5Sqm complete all as directed.
Ditto all as item No 15 above but 22,000 gallon Overhead tank on stagging of appx height 16 mtr from GL and appx area 67.5 Sqm.
Ditto all as item No 15 above but 10,000 gallon Overhead tank on stagging of appx height 16 mtr from GL and appx area 67.5 Sqm.
Ditto all as item No 15 above but 5,000 gallon Overhead tank on stagging of appx height 12 mtr from GL and appx area 55 Sqm
Supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for GI pipe and fixed in 15 mm bore.
Ditto all as item No 19 above but 20 mm dia bore
Ditto all as item No 19 above but 25mm dia bore
Ditto all as item No 19 above but 50mm dia bore
Supply, installation, fixing, jointing and testing, ISI Marked, 150 mm bore cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed on both ends with and including rubber gasket joints, nut, bolts & washers and taking down old us and tested of following size. (Make: Kirloskar/Leader/Zoloto/Kartar).
Ditto all as item No 23 above but 100 mm bore
Ditto all as item No 23 above but 80 mm bore
M & L for preparation of old painted surfaces of steel/ work & applying one coat of synthetic enamel paint of valve pit / chamber cover made of MS sheet cover complete all as specified & directed.
M&L for Construction of brick masonary valve pit chamber with 3.00 mm thick MS sheet covered on angle iron frame of size 40mm x 40mm x6 mm duly painted with two coat of black bituminous paint over coat of red oxide primer with and including all necessary earth work, excavation in soft/loose soil, returning filling in and removed of surplus soil to a distance not exc. 50 mtr, PCC work 15 mm thick in 1:3:6 in foundation projected 10 cm on all sides of external wall, brick work wall 23 cm thick with brunt sub class B bricks in cm 1:4, 15 mm thick plastering in cm 1:4 on internal wall surface and exposed external water surface etc with necessary locking arrangement with 50 mm size one No. lock complete of internal size 1200mm x1200mm x1200mm complete all as shown on TD drawing & all as specified and directed.
Supply, Fixing & testing DI Fittings any size, such as bends(any type, radius & angle) tappers any type (Straight, bend, increasing, decreasing or double socket or both end flanged etc) Tee pieces, single branch 'Y' junction double branch, cross (all socket or spigot & socket or both end flanged), collars, caps, connecting piece and plugs complete all as specified and directed.
M & L for repairing of existing water leakage/ line blockage/gate valve blockage etc on 15 mm to 25 mm bore GI pipe line in SMQ/any buildings at (AF stn BKT) including replacement of cracked/ broken nipple/ elbow/ union/ long screw if required to make leak proof complete including threading/ cutting of pipe as required at site to ensure smooth water supply including arrangement of all T&P and ledder for climbing to roof of SMQ /bldgs and excavation & earth work if any all as specified and directed.
Ditto all as item No 29 above but 32 to 50 mm bore GI pipe
M&L for lead wool joint in 80 mm dia CI pipe including excavation ,returning filling etc complete with tool and plant & all as directed
Ditto same as per item No 31 above but 100mm dia CI pipe
Ditto same as per item No 31 above but 150mm dia CI pipe
M & L for checking of leakage including minor repair of decrin dozer fortnightly or as and when required, loacted at different location of pump house 8,9,10,11 (all are with in 6 KM), pump house 7 No (located at appx 6 KM away from unit) at Indaurabagh and pump house at 358 TRU of any capacity & make and testing complete to deliver recommended qty of chlorination compelte all as directed.
M & L for gland filling of Sluice Valves/Pumps complete all as directed and specified by Engineer-in-Charge
M&L for CI flange Joint with rubber or fibre board gasket suitable for 150mm bore CI pipe complete all as directed.
M&L for D joint complete with all accessories suitable for 150 mm bore pipe line complete all as directed .
M&L for D joint complete with all accessories suitable for 100 mm bore pipe line complete all as directed .
M&L for nut and bolt of different sizes as per requirement complete.
Supply, fixing, testing and commissioning Electronic water level indicator device (Sensor system with LED Display) 10 level showing water level in cm/meter (before overflow) as per predetermined limits and power failure, complete with all accessories all as specified and directed by Engr-in-Charge
Supply, laying, fixing and testing of solid PVC insulated individual shielded for interference rejection, armoured PVC sheathed 1100 volts grade 0.50 Sqmm of 10 pairs instrumental cable used for water level indicator, ISI marked, laid in trenches/ floors or fixed on walls/ on poles, in ducts, in GI pipes on cleatews/ saddles etc. complete all as specified and as directed.
Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned thickness to 18 cm shall be measured) complete all as specified and as directed.
Material & labour for bricks sub-class`B' (Old size), laid flat in trenches for cable protection all as specified and directed.
Labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including M&L HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure comlete all as specified and directed. .
M&L for removing of existing multigraid pressure filter plant , horizontal type of capacity 10000 Glns/hour. Unloading the filter media from the pressure filter ie. gravells (different sizes) without damaging the existing system and taking out the damaged strainer nozzle (push/Thread) type from bed plate . Replace the damaged bottom plate/shell of pressure filter with new as directed. Replace all the strainer nozzle (push/Thread) with new. Cleaning the inside chamber and then fresh charging of new graded gravells in the existing filter plant and closing the top manholes with new gasket seal after replacing of filter media and strainer complete, Repalcing of all existing pressure gauge with new , painting of all inside and outeside of filterplant including painting of pipelines connected duly marking for incomming and outgoing complete all as specified and directed by Engineer- in- Charge including following operations: 1. New graded gravels to be fill will be size of 1" x 3/4" (25-20mm), 3/4" x 1/2" (18-12mm), 1/2" x 1/4" (10-06mm) as directed and required at site. 2. Inside painting will be done with lead free black bituminous paint suitable for pressure filter inside. and outside painting will be done with two coats of synthetic enamel paint. 3. Any minor parts required to make plant serviceable even if notified by the Engr- in-Charge shall be supplied by the firm without any extra cost to the department.
S&F Electric shock and treatment chart (Language: English-Hindi Combined) on acrylic sheet of size 50 cm x 70 cm duly marked permanent marking including 12mm thick plywood frame, clamps for fixing on wall etc all as specified and directed.
Supply & install Emergency First Aid Kit Box, Wall mounted , made from high grade GI metal with powder coating for anti rust proof, size 36 cm x 26 cm x 13 cm,color red &white, front toughened glass fitted , Multicompartment 4-shelf with security lock on door for safety including basic necessary medicines for First aid as directed complete all as specified and directed.
S&F DO's and DON’T's chart (Language: English-Hindi Combined) as per sample provided on acrylic sheet of size 50 cm x 70 cm duly marked permanent marking including 12mm thick plywood frame, clamps for fixing on wall etc all as specified and directed.
S&F MS pipe 150 mm dia complete with fittings i.e. bends, flanges etc all as specified and directed.
S&F MS pipe 100 mm dia complete with fittings i.e. bends, flanges etc all as specified and directed.
S&F MS pipe 80 mm dia complete with fittings i.e. bends, flanges etc all as specified and directed.
M & L for Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron strip 32 x 6 mm as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 40 mm bore medium grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC M-25 cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-1 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre shall be deemed to be inclusive in the quoted rate. 2. Earth filling shall be done by vegitable soil. 3. Soil should be free from stone, boulders, aggregate, gravels etc. 4. On testing,after completion of job ,if desired earth resistence is not found ,the earthing shall be redone at no extra cost to govt.
Supply and lay Chequerred rubber matting 19mm thick and 1 mtr x 2 mtr size confirming to IS 5424-1969 complete all as specified and directed
S&F for Taking down unserviceable pumb tube of decrin dozer installed at various pump houses at BKT and replacing with new pump tube CAT No-MCCP207 Make Declibac coplete all as directed.
Ditto all as item No 54 above but Injection check valve 3/8" CATNo-MCINJ38 Make Declibac .
Ditto all as item No 54 above but Suction/discharge tube of size 3/8" CATNo-MALT002 Make Declibac
Ditto all as item No 54 above but NRV complete. Make Declibac
Ditto all as item No 54 above but Weighted suction line strainer of size 3/8" Cat No ST 138 Make Declibac
Ditto all as item No 54 above but Repairing and rewinding of Strainer motor complete
Ditto all as item No 54 above but Shaft with Impeller for strainer motor (Pt No. 042009B) Make Declibac
Ditto all as item No 54 above but Rollar assembly Make Declibac
Magneoflux
M/S KRISHNA KAVYANSH BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .