Providing Painting Waterproofing and miscellaneous Civil works at INRPK BARCF Kalpakkam

Providing and applying painting Two coats upto 10m levels with Acrylic emulsion paint (APEX or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and applying painting Two coats from 10m to 15m levels with Acrylic emulsion paint (APEX or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and applying painting Two coats upto 10m levels with Acrylic emulsion paint (Ace or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and applying painting Two coats 10m to 15m levels with Acrylic emulsion paint (Ace or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

Supply and application of 2 or 4 coats of Epoxy paint from approved manufacturer & approved shade and approved colour to interior walls, columns, beams, ceiling gantry platform and as indicated in the drawings upto 24m elevation, including scaffolding, staging and approch ladder etc., including preparation of the surface to be painted, by surface grinding, removing laitance, cement slurry, formoil, foreign matter, open voids, water cleaning, protecting the plate EP's, pipe EP's, closed steel boxes, edge angles with masking tape, applying primer coat, one coat of putty mixed with epoxy, filling all voids/pinholes in concrete by approved wall putty mixed with epoxy, removal of roughness in plastered surface with one or two coat of putty, applying epoxypaint by airless spray gun or roller brush with necessary ventilaton system, exhaust fans for proper release of gas, all materials, tools - tackles, equipment, materials, labour, necessary cleaning equipment, etc,. all complete as per manufacturer specification at all elevations and directed by the EIC. Note: Rate includes following 1. Two or more shade with 250 or 500 micron thickness shall be envisaged in a single wall. 2. Wetfilm thickness and Dry film thickness shall be checked at frequent intervals and as per QA requirements. 3. Rate shall also include preparation of concrete/ wall surface by breaking (if required), chipping, surface grinding and making the concrete surface smooth by cement mortar touch up work / minor plastering as indicated by EIC. 4. Painting in confined areas also envisaged in this item. Embedments / equipments available in the room shall be protected with masking tape or by alternate arrangements 250 microns epoxy paint for elevation upto 10m height

Supply and application of 2 or 4 coats of Epoxy paint from approved manufacturer & approved shade and approved colour to interior walls, columns, beams, ceiling gantry platform and as indicated in the drawings upto 24m elevation, including scaffolding, staging and approch ladder etc., including preparation of the surface to be painted, by surface grinding, removing laitance, cement slurry, formoil, foreign matter, open voids, water cleaning, protecting the plate EP's, pipe EP's, closed steel boxes, edge angles with masking tape, applying primer coat, one coat of putty mixed with epoxy, filling all voids/pinholes in concrete by approved wall putty mixed with epoxy, removal of roughness in plastered surface with one or two coat of putty, applying epoxypaint by airless spray gun or roller brush with necessary ventilaton system, exhaust fans for proper release of gas, all materials, tools - tackles, equipment, materials, labour, necessary cleaning equipment, etc,. all complete as per manufacturer specification at all elevations and directed by the EIC. Note: Rate includes following 1. Two or more shade with 250 or 500 micron thickness shall be envisaged in a single wall. 2. Wetfilm thickness and Dry film thickness shall be checked at frequent intervals and as per QA requirements. 3. Rate shall also include preparation of concrete/ wall surface by breaking (if required), chipping, surface grinding and making the concrete surface smooth by cement mortar touch up work / minor plastering as indicated by EIC. 4. Painting in confined areas also envisaged in this item. Embedments / equipments available in the room shall be protected with masking tape or by alternate arrangements 250 microns epoxy paint for elevation from 10m to 15m height

Providing and laying integral cement based water proofing treatment with khurra including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (i) Applying and grouting a slurry coat of neat cement using 2.75 kg / sq.m of cement admixed with proprietary water proofing compound confirming to IS:2645 over RCC slab including adjoining walls up to 300mm height including cleaning the surface before treatment (ii) Laying brick bats with mortar using broken brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (using coarse sand) admixed with proprietary water proofing compound confirming to IS:2645 and approved by Engineer-in-charge over 20mm thick layer of C.M 1:5 (using coarse sand) admixed with proprietary water proofing compound confirming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300mm height including rounding of junctions of walls and slabs. (iii) After 2 days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound confirming to IS:2645 and approved by Engineer-in-Charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 (using coarse sand) admixed with proprietary water proofing compound confirming to IS:2645 and approved by Engineer-in-charge including mixing 'RECRON 3S' fiber at the rate of 125 grams per 50kg of Cement in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square, 3mm deep. (v) The whole terrace so finished shall be flooded with water for a minimum period of 2 weeks for curing and for final test. All above operations to be done in order and as directed and as specified by the Engineer-in-Charge. With Average thickness of 120mm and minimum thickness at khurra as 65mm (At 17m height)

Providing plastering in cement mortar 1:4, 20mm thick at all elevations with 2% of water proofing compound or as per manufacturers specification, ‘Impermo’ or approved equivalent make including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, all as per specifications.

Providing and fixing VITRIFIED floor tiles in different sizes with water absorption less that 0.08% and confirming to IS 15622 of Marbonite or approved make in all colours and shades in Glossy or Matt or satin finish (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3) including machine/hand cutting to required size & shape, grouting the joints with white cement mixed with coloring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications. Note: The sample tile shall be got approved by the Architect/Engineer before procurement. In flooring, tile size of 600x600 mm fixing with 20mm thick bedding in cement mortar 1:4

Providing and fixing 1st quality ceramic glazed floor/wall tiles confirming to IS 15622 of approved make in approved size, shade and colour (as approved by Engineer-in-charge), free from cracks, fissures & flakes with straight edges & perfect corners fixed at right angles as per design and pattern required over a bed of 20mm thick bed of cement mortar 1:4 (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3), including machine / hand cutting to required size and shape, pointed neatly with white cement mixed with coloring pigment to match colour of tile, properly finished in all respects, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: The sample tile shall be got approved by the Architect/Engineer before procurement.