Ramanathapuram Municipality Construction of Ration shop at Ward 11 Indira Nagar

Earth Work Excavation for Foundation in all soils and sub soils and to full deth as may be directed except in hard rock requiring blasting inclusive of shoring , shuttering bailing out water wherever neccessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth l within thecompound in place as shown by the departmental officers with initial lead and lift ,clearing and levelling the site etccomplete

Foundation

Plinth beam

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

PCC in 1:4:8[1cement and 4 sand 8 course aggregate] using with 40mm H.B.G. Jelly including dewatering if found necessary and laid in layersof not more than 15cm thick and compacted etc finishing curing ,cost of materials, conveyance and all other labour charges etc., complete complying with standard specification

Centering for soffits of RCC slabs of plane surfaces like lintels beams etc including strutting 3.00m high using mild steel sheets of size 90cmx 60cmand BG10 stiffened with MS angles of size 25mmx25mmx3mm laid over silver oak [cw] joist of size 10cmx6.5cm[spaced at about 90cm c/c]and supported by casurina props of 10cm to13cm dia[spacedof 75cmc/c of all RCC works , excluding cost of materials and all other labour charges etc., complete complying with standard specification

Column

Plinth beam

Beam,Slab

Supplying and fabricating and placing in position MS or RTS bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors and all other labour charges etc complete complying with standard specificationI

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Foundation

Ground Floor

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

For Foundation & Basement

Ground Floor

Providing M.S grills , Grill doors, and steel doors works as per the design given including cost of steel and also in all floors and all other labour charges etc complete complying with standard specificationI

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Weathering Course with concrete broken brick jelly 20mm guage in pure slaked lime[no sand to be added [over roof slab the proportion of brick jelly to lime being 32 to12.5 mm well beated with wooden beats for giving required slope and thickness as directed by the departmental officers. etc mortar and mix with brick jelly including to of finish with red tiles and cement pointing etc complete complying with standard specification.

Finishing the top roof with 1 course of machine Preesed tiles of 20mm thick [average] of approved quality cm 1;3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar including well curing and all other labour charges etc complete complying with standard specification

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing of 6 way SP DB of 16 A/way with 16Amps DPIC Switch with metel clad of of 500 V with fuse and neutral ( Side handle) on Suitable TW Box PWD Earthing. (SD 149)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD 24)

Light point

Fan point

Wiring with 2x1.5 sq.mm (22/0.30)PVC insulated SC unsheathed Cu. Conductor of 1100V grade in Suitable PVC Rigid Pipe Consealed in Wall and ceiling with PVC accessories in flush with wall with 150nnx100mmx113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 pin non inter locking CS Plug with continious earth wire connection of 14 SWG TC wire and making good of the consealed portion with suitable colour for conealed PVC Plug Point SD 38

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 1 meter down rod on the existing clamp. (SD 107)

Supply and fixing of single box type 4' 20W LED fitting complete with TW round blocks on wall or ceiling LED with PVC unsheathed Copper leads from terminals to the fitting.

Supply and run of 4x6sq.mm.(84/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 68)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)

Provision for GST-18%