42/SE(T)/AMAUSI ZONE/2025-26

a-LT Cable 1x240/400 Sqmm

b-LT ABC Cable 3x50/120 Sqmm

c-T/F 100/250 KVA

d-11 KV 3x120/185 Sqmm XLPE Cable Single CKT

e-Steel Tubeler Pole 11 Mtr. Long

f-33 KV 3x300 Sqmm XLPE HT Cable (D/B Ckt)

g-33 KV Comp. Pole Pin Insulator

h-33 KV 3x300 sqmm XLPE J/K O/D, S/T

i-11 KV 3x185 Sqmm O/D, I/D, S/TH C/J Kit

j-Top Channel

k-Dropper Channel

l-M.S. Earthing Rod

m-Stay Set Complete

n-11 KV VCB for I/C , O/G CTR 200/300/400/600/5A, 350 MVA

o-Vaccum Intrupter (Schneider With Chamber)

p-Vaccum Intrupter (Stelmec With Chamber)

q-11 KV Ring Main Unit for Load Upto 3000 KVA

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only centralized material will be Provided by the Department.

Eearthing of RMU pipe/well type with 60 Fit Deep boring and providing GI Pipe 1.5" dia (60 fit GI pipes) and earthing must be joint by G.I. Strip of 25x5x6 mm thick long attached with nut bolts, clamp, L-piece and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of RMU plinth of size 1.5x1x1 mtr with the help first class brick, sand & cement including plastering and other work required for complication of work in all aspect. All Material shall be supplied by contractor.

Installation and commissioning of RMU by fasting with foundation bolts connected of all three side cable termination setting of relay according to loat at particular place and connected with bore earthing by GI strip.

Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Proper laying & commissioning of (3x50/3X95/3X120 sq.mm) Aerial Bunched Conductor. Only ABC Provided by deptt.

Well type/Bore type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11 KV Ring Main Unit shall be made of rectangular of size as per site requirement not exceeding 2 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type tailless fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fabrication, errection & commissioning of 100 KVA T/F on DP with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Dismantling of 63/100 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Laying of LT XLPE/PVC Cable 3.5X70/3.5X400/1x240/1x400/1x630 sq.mm. as per RESPO Norms. Only cable shall be supplied by department.

Cable Hosting of 11/33 KV 3x70/3x185/3x300 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Laying of 3X300 sq.mm 33 KV XLPE cable by drill method as per RESPO Norms. Only 33 KV XLPE cable supplied by Department.

High pressure testing of 11/33 KV 3x70/3x185/3x300 XLPE cable along with arrangement of High Pressure equipment.

Commissioning of 11 KV O/G FDR VCB at 33/11 KV S/S including connection with, Busbar its Empire tap, PVC tap after grouting 2 No. Channel 75x40 mm its commissioning after taking proper S/D.

Commissioning of Vaccum Intrupter(Schneider/Stelmec with Chamber) as per RESPO Norms with all accessories. All material except Vaccum Interupter shall be supplied by the Contractor.

Please Enable Macros to View BoQ information