Widening and Improvements to Road Jamboti -Rabakavi SH-54 from Km 41.00 to 43.25(Proposed Km 41.00 to 42.78)(Repairs and widening from Chandagad to Khangav KH ) in Belagagvi Taluk Yamakanmardi Constituency under 5054 SH Improvements Appendix-E for the year 2024-25

Widening and Improvements to Road Jamboti -Rabakavi SH-54 from Km 41.00 to 43.25 (Chandagad To Khangav KH) in Belagagvi Taluk Yamakanmardi Constituency.

Citizen Information Board. i) The board will be a composite unit consisting of three plates of Aluminium Composite Materials (ACM), material specifications as per Clause 1701.3.7. The top most platewi...

Clearing and Grubbing road land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier...

Excavation for Surface Unlined Drains.Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not...

Preparation and Surface Treatment of Formation.Preparation and surface treatment of formation by removing mudand slurry, watering to the extent needed to maintain the desiredmoisture content, trimming...

Construction of Embankment with material obtained from Roadway Cutting.Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and oundation...

Construction of Subgrade and Earthen Shoulders.Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to ...

Construction of Granular Sub-base."By Mix in Place Method

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing ...

Wet Mix Macadam.Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...

Prime Coat.Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 ...

Tack Coat.Providing and applying tack coat with RS1 Bituminous Emulsion using mulsion pressure distributor at the rate of 0.25 kg/m2 on Granular surface

Tack Coat.Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ...

Dense Bituminous Macadam.Dense Graded Bituminous Macadam Grading - II for traffic less than 20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggreg...

Construction of BC.Bituminous Concrete Grading II for traffic less than 20 MSA Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grad...

Construction of New RCC Box Culverts-Single Vent 1.0m x 1.0m - 2 Nos

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Mechanical Means: -In all kinds of soils Depth upto 3m Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including s...

1.23 Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (BOX CULVER 5%))

including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the wo...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (Retaining Wall-10%)

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (SLABS -20%) including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FOR FORMWORK (SLABS -20%) including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work.

Supplying, Fitting and Placing TMT Fe550 bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. MORTH Specification No. 1600 & 2200.

Supplying fitting & placing TMT Fe550 bar reinforcement to super-structure complete as per Specifications MORTH Specification No. 1600.

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification MORTH Specification No. 2700

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). MORTH Specification No. 1500,1600 1700...

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) MORTH Specification No. 2702

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification A. Granular materialc Reference to MORTH Specification No. 710.1.4 of I...

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than...

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vert...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

Estimate of Box Culvert 1 Vent (5 m x 3 m)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Mechanical Means: -In all kinds of soils Depth upto 3m Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including s...

1.23 Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (BOX CULVER 5%))

including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the wo...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (Retaining Wall-10%)

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FOR FORMWORK (SLABS -20%) including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work.

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FOR FORMWORK (SLABS -20%) including cost of all materials, labor ,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work.

Supplying, Fitting and Placing TMT Fe550 bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. MORTH Specification No. 1600 & 2200.

Supplying fitting & placing TMT Fe550 bar reinforcement to super-structure complete as per Specifications MORTH Specification No. 1600.

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification MORTH Specification No. 2700

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). MORTH Specification No. 1500,1600 1700...

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) MORTH Specification No. 2702

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification A. Granular materialc Reference to MORTH Specification No. 710.1.4 of I...

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than...

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vert...

Filler Joint (ii) Providing & fixing 20 mm thick compressible fibre boardin expansion joint complete as per drawing & TechnicalSpecification.

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specificationMORTH Specification No. 2705

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

Estimates for Field Culvert Structures-5 Nos

Excavation for Structures. Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading, excavated surfaces, disposing off or& stacking the se...

Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row . Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

ESTIMATE OF TRAFFIC SAFTEY MEASURES

Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheet...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...

Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheet...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 ...

Kilometre Stone

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc- (i) 5th kilometre stone (precast) ...

Kilometre Stone

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc- (ii) Ordinary kilometer stone (precast...

Kilometre Stone

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc- (iii) 200 m stone (precast)

Printing New Letter and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade-English and Roman ...

Road Delineators

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitte...

Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Dense Bituminous Mac...

Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading, excavated surfaces, disposing off or & stacking the selected earth for reuse m i...

Cable Duct Across the Road

Providing and laying of a reinforced cement concrete pipe duct,300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe ...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

a) Water Supply LS

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 forservice connection valves, desig...

b) Electrical Estimate

PSCC Pole - 9 Mtr Long, 200 Kg WL

RCC Pole - 9 Mtr Long, 145 Kg WL

8 Mtr long PSC Pole

Releasing & Refixing of DP Structure with RCC Poles - 9Mtr long 145Kg WL

Spiral Earth Electrodes

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole - 9 Mtr Long, 200 Kg WL

11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)

11 kV, 45 KN Polymeric Insulator

LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL

LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for PSCC Pole - 9 Mtr Long, 200 Kg WL

LT 2 Pin Cross Arm with clamps, bolts, nuts for RCC Pole - 9 Mtr Long, 145 Kg WL

LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole - 9 Mtr Long, 200 Kg WL

1.1 kV Pin Insulator with GI Pin

No. 8 Strain Insulator

Guy Set Complete with No. 8 Strain Insulator & Concreting materials

Guy concreting with Boulders, Mud and Sand

Weasel ACSR Conductor

Rabbit ACSR Conductor

Labour-Releasing & Refixing of 9 Mtr long PSC Pole

Labour-Releasing & Refixing of 9 Mtr long RCC Pole

labour-Releasing & Refixing of Horizontal cross arms with clamps, HTST supports,bolts, nuts and washers for PSC poles

Releasing & Refixing of Horizontal cross arms with clamps, HTST supports,bolts, nuts and washers for RCC poles

labour-Releasing & Refixing of 4pin x arm

labour-Releasing & Refixing of 2pin x arm

Labour-Releasing & Restringing of Weasel ACSR Conductor

labour-Releasing & Restringing of Rabbit ACSR Conductor

DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL

11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod)

11 kV, 45 kN Polymeric Insulator

Guy Set Complete with No. 15 Strain Insulator

Releasing & Refixing of 11kV/433V, 25kVA, 3 Phase 50 Cys Distribution Transformer BEE - 4 Star Rated with Oil

Releasing & Refixing of 11kV/433V, 100kVA, 3 Phase 50 Cys Distribution Transformer BEE - 4 Star Rated with Oil

Earthing materials pipe type for grounding (Single Electrode with accessories)

Caution/Danger Board

Anti Climbing Device (12 Mtr GI Barbed Wire)

Guy concreting with Boulders, Mud and Sand

Guy wire 7/10 SWG

11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA, Polymetic type with ground disconnector

labour-Releasing & Refixing of LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/GPRS Modem (as per technic...

LT Protection Kit for 63 kVA

LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) DOUBLE CIRCUITi) Al Lead Wire - 120 Sqmm(Cost Data Sheet - 1 Sl No. - 2) including labour

ii) Heavy Duty Long Barrel Copper Lug - 120 Sqmm

iii) PG Clamp - Rabbit to 120 Sqmm

iv) Spacer for DTC Wiring

v) Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised)

labour-Releasing & Refixing of LT Metering box with CTs and necessary wiring for housing ETV Meter

Releasing & Refixing of LT Electronic Tri-Vector Meter 5 Amps, 0.5/1.0 Accuracy Class

11 kV, Solid Core Type HG Fuse Unit

11 kV, 200 Amps, Single Break GOS

Labour-LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) DOUBLE CIRCUIT

Labour-Releasing of existing PSC/PCC Poles

labour-Releasing of existing RCC Poles

labour-Releasing of existing horizontal cross arms

Releasing of existing 4pin / 2pin cross arms

Electrical Inspectorate Charges

Supervision Charges 5 Percentage

c) Cutting of Trees Estimate

Trees cutting and Replantation

(No of cutting tress=26, Replating tree (1Tree = 10 Plant)

Per 1km Maintainance charge

Forest Dept 1percent charge

3rd ,4th and 5th year Maintenance

Road Maintenance for 3rd year for road with DBM+BC as wearing coat

Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by ...

Road Maintenance for 4th year for road with DBM+BC as wearing coat

Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by c...

Road Maintenance for 5th year with DBM+BC coat as wearing coat

Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by clear...