Loading
Loading…
Loading…
Tender ID
Tender Value
₹69.2 L
EMD Value
₹1.4 L
Closing Date
23 Mar 2026, 10:00 pmClosed
Directorate of Municipal Administration
CO TMC Karatagi
Fixing of street light at ward no 20 RG Road to canal though Anganawadi near Amarul house at ward no16, Fixing of street light at RG Road to Urdu School at Ward no21, Fixing of street light at Ward no.15 Navali Road to Chellur Road Canal in Kanakagiri Assembly Karatagi TMC Limit.
DMA/2025-26/EL/WORK_INDENT55898
DMA/2025-26/EL/WORK_INDENT55898
Open
Electrical
Two Tender Document System(Two Cover)
DMA Town Municipal Council Karatagi
4 documents required · 4 mandatory
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 achieved in at least two financial years an average annual financial turnover of Rs. 82.53 Lakhs not less than the estimated cost under this contract with valid UDIN No
PWD Electrical Registration Certificate
Satisfactorily completed as prime contractor, at least one similar nature of work to an extent 50% cost of the Similar Works signed by not less than Executive Engineer Rank with Valid Indent Number Compulsory (value not less than Rs 41.26 L) (with Indent No)
Unconditional Banker Certificate Liquid assets and /or availability of credit facilities of no less than Rs 20.75 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc (usually 30% of the amount of contract) ( with valid branch email-id)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
GST and Pan
₹1,730
₹1.4 L
7 Mar 2026
7 Mar 2026
25 Mar 2026
23 Mar 2026
Fixing of street light at ward no 20 RG Road to canal though Anganawadi near Amarul house at ward no16, Fixing of street light at to Urdu School at Ward no21, Fixing of street light Ward no 15 RG Road Navali Road to Chellur Road Canal in Kanakagiri Assembly Karatagi TMC Limit.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft,IS2062forbaseplatewithdooropeningarrangements,
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Stand...
SupplyofLEDfloodlight luminairewithpressurediecast aluminium housing
body for optimal thermal dissipation.Lamp compartment comprising ofanti
glare clear diffuserwithInjectionmoulded polycarbonate clea...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existingpole /wall ceilingincluding clamps, bolts, nutsandwiring using suitable capacity wires. (Vol VI, Page No. 56, Item No. 13.5)
Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mo...
Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc and fixing using inverted wood plugs in case of ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand 4 mm2 (Vol VI, Page No. 05, Item No. 2.3.4)
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Fabricating supplying and mounting MSboxmade out ....SWG
suitableforfloor /wallmounting, fullyweather proofwith provision
for better heat dissipation, provided with hinged front cover,
equipped with t...
SupplyingandfixingMicroprocessorbasedElectronic timer (without
contactor,DinMountingusingnecessarybolts,nutsandwashersetc.,.)
3-120sec setting.(Vol VI, Page No. 21, Item No. 5.47)
Supply and fixing of 3 pole power contactor with NO/NC contacts on
existing wood/panel board using necessarybolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 A...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers. 5.7.3 63 A (Vol VI, Page No. 14, Item No. 5.7.3)
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.(Vol VI, Page No. 9, Item ...
Making and fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable as per BESCOM specification (BESCOM SR Page : 445). Up to 4C x 50 Sqmm (Vol VI, Page No. 15, Item No. 35.01)
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (Vol VI, Page No. 13, Item No. 35.01)
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Supplying fixing andwiring earth electrode for groundingof lifts,
transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGI
pipewithGIfunnelwithmeshandsuitablesizereducer fixedonthe
top of the earth ele...
GI/Copper strips for grounding connections, usingnecessary fixing
materials as required. 12.58.3 25 x 6 mm GI strip (Vol VI, Page No. 54, Item No. 12.58.3)
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436) 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (Vol VI, Page No. 5, Item No. 12.57)
358078-SMC Street lighting metering B
Dismantling of cement concrete pavement by mechanical means
using pneumatic tools, breaking to pieces not exceeding 0.02 m3
in volume and stock piling at designated locations and disposal of
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft,IS2062forbaseplatewithdooropeningarrangements,
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Stand...
SupplyofLEDfloodlight luminairewithpressurediecast aluminium housing
body for optimal thermal dissipation.Lamp compartment comprising ofanti
glare clear diffuserwithInjectionmoulded polycarbonate clea...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existingpole /wall ceilingincluding clamps, bolts, nutsandwiring using suitable capacity wires. (Vol VI, Page No. 56, Item No. 13.5)
Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mo...
Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc and fixing using inverted wood plugs in case of ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand 4 mm2 (Vol VI, Page No. 05, Item No. 2.3.4)
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Fabricating supplying and mounting MSboxmade out ....SWG
suitableforfloor /wallmounting, fullyweather proofwith provision
for better heat dissipation, provided with hinged front cover,
equipped with t...
SupplyingandfixingMicroprocessorbasedElectronic timer (without
contactor,DinMountingusingnecessarybolts,nutsandwashersetc.,.)
3-120sec setting.(Vol VI, Page No. 21, Item No. 5.47)
Supply and fixing of 3 pole power contactor with NO/NC contacts on
existing wood/panel board using necessarybolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 A...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers. 5.7.3 63 A (Vol VI, Page No. 14, Item No. 5.7.3)
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.(Vol VI, Page No. 9, Item ...
Making and fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable as per BESCOM specification (BESCOM SR Page : 445). Up to 4C x 50 Sqmm (Vol VI, Page No. 15, Item No. 35.01)
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (Vol VI, Page No. 13, Item No. 35.01)
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Supplying fixing andwiring earth electrode for groundingof lifts,
transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGI
pipewithGIfunnelwithmeshandsuitablesizereducer fixedonthe
top of the earth ele...
GI/Copper strips for grounding connections, usingnecessary fixing
materials as required. 12.58.3 25 x 6 mm GI strip (Vol VI, Page No. 54, Item No. 12.58.3)
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436) 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (Vol VI, Page No. 5, Item No. 12.57)
358078-SMC Street lighting metering B
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft,IS2062forbaseplatewithdooropeningarrangements,
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Stand...
SupplyofLEDfloodlight luminairewithpressurediecast aluminium housing
body for optimal thermal dissipation.Lamp compartment comprising ofanti
glare clear diffuserwithInjectionmoulded polycarbonate clea...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existingpole /wall ceilingincluding clamps, bolts, nutsandwiring using suitable capacity wires. (Vol VI, Page No. 56, Item No. 13.5)
Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mo...
Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc and fixing using inverted wood plugs in case of ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand 4 mm2 (Vol VI, Page No. 05, Item No. 2.3.4)
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Fabricating supplying and mounting MSboxmade out ....SWG
suitableforfloor /wallmounting, fullyweather proofwith provision
for better heat dissipation, provided with hinged front cover,
equipped with t...
SupplyingandfixingMicroprocessorbasedElectronic timer (without
contactor,DinMountingusingnecessarybolts,nutsandwashersetc.,.)
3-120sec setting.(Vol VI, Page No. 21, Item No. 5.47)
Supply and fixing of 3 pole power contactor with NO/NC contacts on
existing wood/panel board using necessarybolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 A...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers. 5.7.3 63 A (Vol VI, Page No. 14, Item No. 5.7.3)
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.(Vol VI, Page No. 9, Item ...
Making and fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable as per BESCOM specification (BESCOM SR Page : 445). Up to 4C x 50 Sqmm (Vol VI, Page No. 15, Item No. 35.01)
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (Vol VI, Page No. 13, Item No. 35.01)
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of a) Cable trench excavation, 1000x 0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR (Vol VI, Page No. 62,...
Supplying fixing andwiring earth electrode for groundingof lifts,
transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGI
pipewithGIfunnelwithmeshandsuitablesizereducer fixedonthe
top of the earth ele...
GI/Copper strips for grounding connections, usingnecessary fixing
materials as required. 12.58.3 25 x 6 mm GI strip (Vol VI, Page No. 54, Item No. 12.58.3)
Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436) 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (Vol VI, Page No. 5, Item No. 12.57)
358078-SMC Street lighting metering B
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw_55898.doc
Tender Document • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .