REPAIR TO PATH, HARD STANDING KERB STONE, RAOD FURNITURE AND MISC ITEMS AT AREA UNDER AGE B/R-I SUBROTO PARK

Amount

Demolition/Dismantaling of Concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for 60mm thick, M-30 Grade Machine pressed precast concrete interlocking paver block any shape and size casted in plastic moulds and compated on vibratory table confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed.

All as per Srl item No 2.00 here-in-above but except interlocking paving blocks i.e. using old interlocking paving blocks obtained from dismantling under serial item No. 1.00 here-in-before laid over and including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Prepolished Chequered cement concrete tiles 25cm x 25cm/ 30cmx30 cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement pigment, in floors over and including 20 mm thick screed bed or bedding of CM 1:6 complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specifed and directed.

M&L for 40 mm thick Cement concrete type B-1,(1:2:4) 20mm graded aggregate) as in sub floors, sub bases , floors and pavings/ paver blocks etc.,

M&L for preparation of old surfaces of walls including corrices (plastered or unplastered surfaces) by scraping down smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, including cornices and applying one coats of exterior weather proof paint on old decorated any surfaces walls/ foot paths , etc., all as specified and as directed by Engineer-in-Charge.

Dismantling of plain cement concrete in kerb stone & the like of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.

M&L for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B1 using 20mm graded stone aggregate with plan or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:6, making good disturbed surface of ground complete all as specified and directed.

All as per Srl item No 10.00 here-in-above but except precast cement concrete kerb stone i.e. using old precast cement concrete kerb stone obtained from dismantling under serial item No. 9.00 here-in-before complete all as specified and directed.

M&L for preparation of new concrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in blue/black and white colour over a coat of primer complete all as specified & as directed.

M&L for preparation of old previously painted concrete surfaces of Kerb stone etc over 10cm in width or girth and applying one coat of synthetic enamel paint, alternate in blue/black and white colour complete all as specified & as directed.

M & L as in repair for providing precast cement concrete type B0 (1:2:4) (12.50 mm graded aggregate) set in cement mortar (1:4) louvers and jallies 35.00 mm thick (measured solid), including all mouldings , complete all as specified.

M&L for cleaning and preparing the road surface and marking with reflective thermoplastic white/yellow road marking paint conforming to BIS-3262, laid through road marking machine in 2.5mm thick layer of CRYSTALEX using 5 Kg material per square meter by incorporating the white glass beads 250 gms/Sqm for reflectivity for lines,dashes, arrows,zebra marking etc all as specified and as directed. Note :- (i) Unit rate quoted by the contractor include for provision of red signals to keep off trafic from green work, cleaning road surface and working during odd hours when traffic is light. (ii) The line marking shall stand out boldly and solidly without showing signs of scratch marks or surfaces underneath, if necessary, the surface shall be remarked after removal of existing treatment until the desired result is obtained. Make :- Asian Paints, Berger Paints & Shalimar Paints as approved by GE.

S&F in repairs solar cat eyes (solar studs) made of aluminium dicasted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystaline solar panel(2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela), view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardner etc as per manufacturer's instructions at the location complete all as directed.

S&F convex mirror 100cm of polycarbonate material on road junction and corners with adjustable brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair solar delinator, 1200mm long, Flashing rate 30 times per minute, Electronically operated with Solar cells, Battery Ni-Cd 1.2 V, bottom frame aluminum, reflective frame polycarbonate PCC block of size 30cm x 30cm x 30 cm of PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and including necessary excavation, earth work and removal of soil to a distance n. exc. 50m complete all as directed.

M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces in area n.exc 400 sq m and exceeding 50mm deep but not exceeding 100mm deep including disposal of spoil complete all as directed by Engineer in charge.

Repair to pot-holes any depth, exc 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, using Paving Bitumen VG-30, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of pot-holes exc 30 mm

S&F in repair speed bump (speed breaker) made of heavy duty ABS with high resisstance wear & tear property, US stabilized black and yellow coloured, high reflective reflector having length 500mm width 400mm and height 75 mm coloured fixed on ground with necessary bolts as recommended by manufacturer and filled with PCC 1:2:4 (using 12.5mm graded stone aggregate) on hollow space of speed bump complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed.

M&L for premix/ ready mix compound sellers for patch work upto 1.0 Sqm area of road as recommended by manufacturer ncluding sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges and making good disturbed ground complete all as specifed and directed.

Tsmalik

SURESH KUMAR SHARMA & CO

J D ENTERPRISES

High Tech Metal India