Balance work for construction of Watcher Hut of Fisheries Department at Sarthal Bani by way of PL Tiles Sanitary Installation etc

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms including getting out excavated earth incl. disposal of surplus excavated earth as directed by Engineer-in-charge, including all leads and lifts. a) All kinds of soil. = 50%, b) Hard rock(Blasting Prohibited) = 50%.

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size). (including all leads and lifts carriages of material by MT/HL)

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size (including all leads and lifts carriages of material by MT/HL)

Random Rubble Masonry with hard stone in superstructure above plinth level and up to floor five level, including leveling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like. a) Cement mortar 1:6 (1 Cement :6 coarse sand). (including all leads and lifts carriages of material by MT/HL)

20mm cement plaster of mix. a) 1:4 (1 Cement: 4 coarse sand). (including all leads and lifts carriages of material by MT/HL)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10 sqm.). (including all leads and lifts carriages of material by MT/HL)

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. i) Size of tile 600x600mm. (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make, in all colour, shades except begundy bottle green, black or any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (including all leads and lifts carriages of material by MT/HL)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms including getting out excavated earth incl. disposal of surplus excavated earth as directed by Engineer-in-charge, including all leads and lifts. a) All kinds of soil.

Providing and laying PVC soil waste pipe including bed concrete and all iround PVC pipe as per standard design (Prince, finolex, superme make of 4 kg / cm² pressure.

(i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC loose collar (surpreme / prince make).

(i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC plain bend (surpreme / prince make).

i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC door tee (surpreme / prince make).

(i)75mmx75mmdia

(ii) 100mm x 100mm dia

Providing and fixing PVC terminal guard (cowl) (surpreme / prince make).

(i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC clamps (supreme / prince make)

(i) 75mm dia

(ii) 100mm dia

Cutting holes upto 30cm x 30cm in walls including making good the same.

Cutting holes upto 15x15 cm in R.C.C floors and roofs for passing drain pipe etc. and reparing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. (including all leads and lifts carriages of material by MT/HL)

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC tob slab with 1: 1.5 : 3 : mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with FPS bricks with class designation 75 and with (a) crushed stone aggregate.(including all leads and lifts carriages of material by MT/HL)

Making chases upto 7.5x7.5 cm in walls including making good after housing G.I.pipe etc.

Providing and fixing G.I.pipes complete with G.I.fittings excluding trenching and refilling etc.(internal work) (i) 15 mm dia GI pipe (Medium)

Providing and fixing G.I.pipes complete with G.I.fittings excluding trenching and refilling etc.(external work) (ii) 20 mm dia, GI pipe (Medium)

Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end).(ii) 20 mm nominal bore

Providing and fixing G.I.union for in G.I.pipes including cutting and threading the pipe and making long screws etc (net work)

(i) 15 mm nominal bore

(ii) 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete. a) 25mm nominal bore.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fitting and fixtures, complete including cutting and making good the walls and floors wherever required: W.C.pan of Hind ware / Cera make with ISI marked white solid plastic seat and lid.

Providing and fixingWhite vitreous china wash basin including making all connection but excluding the cost of fitting. a)Flat back ISI marked size 630 x 450mm

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings (Jagubar/Hindware).

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. a)White glazed fire clay kitchen sink of size 600 x 450x250mm

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved make confirming to IS : 8931

Providing and fixing P.V.C for Gully, floor or nahani trap (Prince Make).

Providing and fixing PTMT grating of approved quality and colour. Circular type. a) 100mm nominal dia

Providing and fixing chilli or jaguar make of approved quality and standard specifications.

(i 15mm short body C.P. bib cock

(ii 15mm long nose C.P. bib cock

Providing and fixing C.P brass close hole basin mixer piller tap of approved quality and make , weighing not less than 1.970 kg. a) 15mm nominal bore of standard back type.

Providing and fixing C.P.brass shower rose with 15 or 20mm inlet. a) 100 mm diameter.

Providing and fixing 32mm dia PVC waste pipe for sink or wash basin including PVC waste fitting complete. Flexible pipe.

Providing and fixing PTMT towel rail complete brackets fixed to wooden cleats with C.P. brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 grams.

Providing and fixing PTMT shelf 440mm long 124mm width and 36mm height of approved quality &colour weighing not less than 300 grams.

Providing and fixing PTMT soap dish holder having length of 138.0, breadth 102.0, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88gms.

Providing and fixing looking mirror of superior glass(of approved quality )and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Hutt Mashka crusher for an average lead of 90.00 Km. by M.T b) Stone aggregate 40mm nominal size & above from Hutt Mashka crusher for an average lead of 90.00 Km. by M. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Hutt Mashka crusher for an average lead of 90.00 Km. by M.T d) Stones from Local nallah for an av. lead of 5.00 km. by M.T.

Vijay Kumar