ADDITIONAL ALTERATION IMPROVEMENT TO COMMAND HQ BUILDING AT AF STATION BAMRAULI

Amount

M & L 18mm thick celuka PVC sheet minimum 600 Kgbm density Grade-1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

M & L 18mm thick celuka PVC sheet minimum 600 Kgbm density Grade-1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

M & L 12mm thick celuka PVC sheet minimum 600 Kgbm density Grade-1 quality of one side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet back complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

Supply only auto closing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed.

Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed.

Supply only 200mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and not exc. 4 Sqm complete all as specified and directed.

S & F powder coated anodised aluminium (sliding/ hanging/ fixed type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 5mm thick sun control plain glass in panels incl all fitting and fixture complete all as spesified and directed .

M & L powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60 X 44.45 X 2.00 mm thick and shutter aluminium anodised and top rail 47.62 X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50 X 44.45 X 1.50 mm and bottom rail150.00 X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

S & F powder coating anodised alumium glass partition wall with frames size 101.60x44.45x2.0mm thick and shutter alumium anodised and top rail 47.62x44.45x1.50mm and style 47.5 x 44.5 x 1.5mm, lock rail 83.5 x 44.45 x 1.50mm and bottom rail 150 x 44.50 x 2.50mm with 5.5mm thick plain glass including necessary fitting and fixture complete all as specified and directed.

S & F aluminium grill weight not less than 5.60 Kg per Sqm to be fitted with aluminium channel complete all as specified and directed.

M & L Plain solid straight chowkats and frames rebated and put together with glue pinned joints supplied and fixed of second class hardwood complete all as specified and directed.

M & L Flush shutters 30 mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Mild steel flat iron as in hold fast etc and similar work complete all as specified and directed.

M & L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast etc bed plate complete all as specified and directed.

Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tounge anodised,with hard drawn steel spring, with overall length of cover plate 140mm complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed

S & F extruded Aluminium handles fabricated type anodised 150m size complete all as specified and directed

S & F Aluminium alloy, anodised sliding door bolt 300mm long with hasp staple (bolt type and fixing bolts and slilding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S & F 100mm Butt hinges, stainless steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed

S & F in repair venation blind vertical type or plain decorated type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement tixed to wall completed all as sspecified & directed.

S & F drapery rod 19mm inner dia (wall thickness not less than 1.60mm) stainless steel fancy type bracket fixed with rawl plug or screws on wall/beam and shall be provided with fancy finial at ends as approved by Garrison Engineer complete all as specified and directed. Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.

S & F in curtain brackets stainless steel with matching with the curtain rod complete all as specified and directed.Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.

S & F in repair door closer, hydraulically regulated, designation No 3 universal type suitable, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed door closer, aluminium (die cast) body, all as specified and as directed.

S & F of PVC wall panelling in double layer sheet for panel & inner framework. The strips should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC strip. The PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels are joined through solvent content. Wall panelling S Side prelam sheet complete all as specified and directed.

S & F premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600 module consisting of wall angle section 24x24mm and tee section with web height of 38mm and flange 24mm and cross T 24mmx24mm size with suspension system complete all as per TD drg No CWE/BAM/TD-34 dated 29 Sep 2016.

Demolition of brick work or stone masonry built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as spd & directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:3 on surfaces of brick, concrete wall, chajja surface finished even and smooth using extra cement with 2% WPC by weight of cement complete all as specified and directed. Note : WPC item shall be measure and paid seprately under respecive item of as supply only

Supply only Liquid water proofing compound complete all as specified and directed

M & L for rendering 15mm thick in CM 1:4 on faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 as on ceiling surfaces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L preparation of new wall surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant cement primer complete all as specified and directed.

Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new wall surfaces and applying three coat white wash on new ceiling surfaces complete all as specified and directed.

Preparation of old plaster surface of wall and applying one coats of weather coat exterior emulsion paint on wall surfaces over one coat of cement primer in any height complete all as specified and directed.

M & L for complete removing of existing treatment on wall surface and applying two coat of OBD including a coat of birla white care Putty on wall obtain smooth finish etc complete all as specified and directed.

Dismantling floor hearth or wall tiling incld cement mortar, bedding (but not backing), removing serviceable tiles and rubbish of the premises complete all as specified and directed.

M & L double charged vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions over & including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed.

M & L double charged vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, in skirting, set and jointed including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L Non- skid ceramic tiles7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M & L Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complite all as specified and directed.

S & F glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed inwhite or colour cement to match rendering 10 mm thick in CM 1:4 on vertical surface as in backing coat complete all as specified and directed.

S & F framed work such as grills, grating etc with ends of bars shoulders and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters; walk way, railing, frame work of water tank and similar work confirming to Fe 260 Gde E-165 also fastening and fixing complete all as specified and directed.

M & L for french polishing of any description width or girth including cleaning and preparation the surface including a coat of wood filler on New work with two or more coat on wooden surface complete all as specified and directed

M & L preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint complete all as specified and directed.

M & L preparation of old surfaces of steel of any description over 10cm grith or width, not otherwise described with two coats of synthetic enamel paint complete all as specified and directed.

S & F in repair bib tap long body with wall flange, fancy type, chromium plated, brass, screwed for 15mm bore iron pipe with capstain head complete all as specified and directed.

Supply and fix in repair Pillar taps cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot of cold with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified and directed.

S& F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in postion complete all as specified and directed.

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc complete all as specified and directed.

Supply and fix in repair brass chromium plated bottle trap (32mm size with 300mm x 190 mm long wall connection pipes with wall flange) for WHB, screwed for pipe including necessary packing, union and cap etc complete all as specified and directed.

Supply and fix vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications.

S & F vitreous china Urinal, half stall type, white including flushing cistern, flush pipe and waste pipe, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing autoamtic flushing cistern with brakets, flush pipe, grating and union for discharge pipe complete all as speicifed and directed

S & F Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap complete all as specifed and directed.

Supply and fix in repair chromium plated stainless steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete.

Supply and fix in repair 6mm thick bevelled edge designer type looking mirror fixed incuding side and back side water proof commercial plywood/pvc sheet/beading with CP plug with chromium plated brass screws and cup washer fixed on wall complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.

S & F Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long) complete all as specified and directed.

Material and labour for low level cistern of 10 ltr cap PVC dual flush, symphonic action type , with inlet ball valve and float and handle 32 mm dia including bracket after fixing tiles etc including taking down existing complete all as specified and directed.

Demolition of concrete in ground floors, paving or any position n.exc. 15 cm thick (below & above ground level) complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.

Supply & fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapples complete all as specified and directed

S & F Rotational moulded polythene triple layer (white color) water storage tanks, hoisted and fixed in position 500ltrs capacity including 2 Nos GI union, checked nut and 15mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia, 2 Nos nipple including taking down old PVC tank complete all as specified and directed.

S & F Rotational moulded polythene triple layer (white color) water storage tanks, hoisted and fixed in position 1000ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 20mm dia, 2 Nos nipple including taking down old PVC tank complete all as specified and directed.

M & L for in repair for 15mm dia PVC float valve with ball (plastic) & rod (Prayag) including taking out existing complete all as specified and directed.

M & L for in repair for 20mm dia PVC float valve with ball (plastic) & rod (Prayag) including taking out existing complete all as specified and directed.

M & L for in repair for 25mm dia PVC float valve with ball (plastic) & rod (Prayag) including taking out existing complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

M & L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring complete all as specified and directed.

M & L providing and injecting chemical emulsion for Post Constructional Herbicides Treatment along wall complete all as specifed and directed

M & L for points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all specified and directed.

M & L for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron in not provided using chemical emulsion at the rate of 7.50 liters per Sqm of the verticle surfaces of the sub-structure to a depth of 300 mm rodding etc complete all specified and directed.

Taking down carefully aluminium batten point wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc complete all as specified and as directed for the followings:-

One light/fan/bellpoint controlled by one switch single pole one way

one 3 pin 6 amp switch socket out let independent .

one 3 pin 6 amps socket outlet on the same board with other switch complete .

All as per item No 81 here-in-before but using 02 run 4.0 sq mm size for main cable and 01 run 4.0 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.

Supply and fixing switch modular flush 6A single pole one way ISI marked complete all as specified and as directed

Supply and fixing modular sockets 6 Amp 2 in 1 2/3 pin combined ISI marked all as specified and directed.

Supply and fixing switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked complete all as specified and as directed

Supply and fixing modular sockets 16 Amp 2 in 1 3/5 pin combined ISI marked complete all as specified and as directed

Supply and fixinging Modular bell push flush type 5 Amps single pole 230 Volt white finish ISI marked complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 60x25mm three terminal complete all as specified and as directed

Supply and fixing electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type complete all as specified and as directed

Supply and fixing in replacement white cover plate with frame two module for modular switches and sockets complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame four module for modular switches and sockets complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame twelve module for modular switches and sockets complete all as specified and directed.

Supply and fixing in replacement white cover plate with frame sixteen module for modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box 1 or 2 modul as required 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box four module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing metal flush box sixteen module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fixing MCB DB SPN 12 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and fixing MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered complete all as specified and directed by Engineer in charge

Supply and fixing MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and fixing calling bell AC buzzer complete all as specified and directed by Engineer in charge

Supply and fixing down rod for ceiling fan made out of galvanized iron pipe of size 15mm dia medium grade(ISI marked) of length 1.20 metre including threading, cutting, slotting, drilling including nut, bolt, clip, washer and rubber real complete all as specified and directed.

M & L for Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLSH, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete complete all as specified and directed. Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

M & L for Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLSH, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED Light fitting mirror type with high out put diffuser 2 feet ,10watt ,220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.

S & F show case LED warm white lamp light 5 Watt complete all as specified and directed.

S & F LED wall spot light 4 watt , 220 Volt warm white 230 lumen, 50 Hz complete all as specified and directed

S&F surface /recessed mounted, round/square LED down light fitting with die cast aluminium housing and system wattage of 15/18W, including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length incl taking down old & deposited to MES store yard complete all as specified and directed. Note : Cost of remote cell included in this item

Supply and fixing wall mounted fan 400mm, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system complete all as specified and directed.

Supply and fixing in repair Ventilating Fan 250mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as pecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Taking down carefully from existing place ceiling fan and removing to MES store yard Scraping, cleaning greasing/oiling and refixing at site complete incl electric connection with three core flexible wire 1.5 Sqmm and writing MES No complete all as specified and directed.

Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface complete all as directed by Engr-in charge.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB any capacity as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fixing in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Material and labour for dismantling, shifting and refixing of split type Air Conditioner (Indoor and Outdoor units) of any make and any type after servicing and charging of gas (M410a/R134a/R-22/r32) by testing the leakage in system by filling of Nitrogen gas upto 300 PSIG and repairing of leaking spot/joints with gas welding work, cleaning and flushing out the complete system with gas, supply and replacing of drier/filter, making the complete system leak proof, vacuuming the system as existing and testing etc complete all as specified & directed. Note : Quoted rate shall be deemed to include following :- (a) Drier capillary, copper tubing, refrigernt gas, Insulation and LDPE pipe. (b) Making hole and filling the hole on wall with PCC (1:2:4) type B0 (Using 12.5mm graded stone aggregade, 15mm thick rendereing in cement mortar (1:3) and making good the disturbed surface with existing schedule of finishes.

Supply and fixing ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps complete all as specified & directed.

Supply and fixing in replacement of 12 volt 65 AH tubalar SMF battery five year warranty complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. (iv) Earth work included in the rate .

M&L Rigid non-metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc without exclusive of boxes (junction/ terminal) complete all as specified and directed.

Supply and fixing in replacement 1.5 Sqmm FRLSH PVC insulated stranded copper conductor cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement 6.0 Sqmm FRLSH PVC insulated stranded copper conductor cable 1100 volts grade complete all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

DEORA ELECTRIC WORKS

R.K.ASSOCIATES

M/s NSA Engineering Corporation

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD

M/S Amar Enterprises