Additional Palus MIDC Industrial Area . M and R to Water Supply Scheme. Providing specialized coating treatment to pump house and sump at Palus WTP

Amount

Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete.

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Providing and applying RP-100 polymer modified repair plasters a high quality polymer modified cement based ready mixed plaster mortar, which has a very high strength and is crack resistant and has good adhesion to all concrete, including all costs of labour and material as per directions of engineers in charge etc.complete

Providing and applying Epoxy slurry mortar (ESM), which is a three component of Resin, hardener and Thickened water to stop leakages, rising dampness, seepage of water from internal or external RCC slabs, tanks, masonry walls, including all costs of labour and material as per direction of Engineer in charge etc.complete.

Providing & applying High Built Flooring Screed, a 3 part epoxy based self-leveling floor leveling & thickness build up screeding compound over prepared surface upto 3mm thickness to prepare unique level surface prior to application of floor coating for high strength epoxy flooring.

Providing of solvent less epoxy based floor primer in coat to provide excellent adhesion prior to application of High Built Screeding & Floor Coating.

Providing of heavy duty Electrical Insulation 3 part epoxy based self leveling floor coating of 2mm thickness to provide min. dielectric strength of 25 KV having approval of ERDA mixing along with CP2111 color based epoxy for desired color top flooring. Applying one coat of yellow stripping, two component polyurethane based coating for walk way preparation.

Providing & applying two coats of EP Plus 800 (HIGH BUILT EPOXY COATING) it can be applled to most of the surfaces to provide a waterproof, dust proof and hard wearing surface with excellent chemical resitance. Mixing ration of resin and hardern is 88:12 the finish surface should be smooth and semi glossy. film thickness 125-150 Microns per coat. packaging of the material is of 5 & 25 kg etc complete

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kilogram/cumdensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete

D. S. CONSTRUCTION (BID ID -7031041)

ADITI CONSTRUCTION (BID ID -7031352)