REPAIR TO BATHROOM TILES, SANITARY FITTINGS, LEAKAGE SEEPAGE AND MISC WORKS IN CERTAIN OTM ACCN IN ZONE-II UNDER GE (A) JAISALMER

Amount

Taking down cement plaster on brick or stone wall surfaces, etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified & directed by Engineer-in-charge.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

Material and labour for 05 mm thick rendering in ceiling in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall externally and applying two coat of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.

Material and labour for applying three coat of white wash (lime) surface of ceiling including preparation of new plastered surface of ceiling complete all as specified & directed by Engineer-in-charge.

M&L for Preparation of new surfaces of walls and applying two coat oil bound distempering over a coat of chalk whiting complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in-charge.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, complete all as specified & directed by Engineer-in-charge.

M & L Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc complete all as specified & directed by Engineer-in-charge.

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified & directed by Engineer-in-charge.

S & F in repair 20mm stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc complete all as specified & directed by Engineer-in-charge.

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engineer-in-charge.

S&F in repairs stop cock cast copper alloy but fancy type and chrominum plated with long shank and cup (concealed type) fixed in 15mm bore dia of pipe complete all as specified & directed by Engineer-in-charge.

S&F in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) all as specified & directed.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets complete all as specified & directed by Engineer-in-charge.

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete all as specified & directed by Engineer-in-charge.

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer complete all as specified & directed by Engineer-in-charge.

S & F in repair Bib taps two way type, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed complete all as specified & directed by Engineer-in-charge.

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket etc complete all as specified & directed by Engineer-in-charge.

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed complete all as specified & directed by Engineer-in-charge.

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe complete all as specified & directed by Engineer-in-charge.

S&F Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms) complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified & directed by Engineer-in-charge.

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.

S& F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed by Engineer-in-charge.

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement, incl grating union for discharge pipe etc complete all as specified & directed by Engineer-in-charge.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of size 15mm bore complete all as specified and directed.

S &F for Galvanised mild Steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of size 20mm bore complete all as specified and directed.

S & F for Galvanised mild Steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified & directed by Engineer-in-charge.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) complete all as specified & directed by Engineer-in-charge.

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap) complete all as specified & directed by Engineer-in-charge.

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and directed by Engr-in-charge.

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified & directed by Engineer-in-charge.

M&L for 20 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed in repair complete all as specified & directed by Engineer-in-charge.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified & directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified.

S&F Butt hinges 75 mm size medium weight cold rolled mild steel and fixed complete all as specified & directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified & directed by Engineer-in-charge.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified & directed by Engineer-in-charge.

S&F 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 150 mm dia complete all as specified & directed by Engineer-in-charge.

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 200 mm dia complete all as specified & directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe all as specified.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe all as specified.

M&L for 150mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete as directed by Engineer-in-Charge.

M&L for 200mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete as directed by Engineer-in-Charge.

Demolition of Reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed by Engineer-in-charge.

M&L for precast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-charge.

M&L for mild steel TMT bars 6 mm to 8mm dia., cut to length, bent to shape required, including cranking bending etc and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia confirming to IS complete all as specified & directed by Engineer-in-charge.

M& L for Cast iron floor trap any size, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed by Engineer-in-charge.

M& L for gully trap in any size,with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) and removing the same out side MD land complete all as specified & directed by Engineer-in-charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-charge.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified complete all as specified & directed by Engineer-in-charge.

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed by Engineer-in-charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing complete all as specified & directed by Engineer-in-charge.

M&L for 25 mm thick sand cushing for laying of precast concrete interlocking tiles including watering and consolidation complete all as specified & directed by Engineer-in-charge.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using grey cement and no pigment of any shape and size conforming to IS 15658 - 2006, complete all as specified & directed by Engineer-in-charge. Note :- Pattern of tiles to be Rubber moulded or equivalent as approved by GE.

S & F Chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cement and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete all as specified & directed by Engineer-in-charge.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone, copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

Dismantling (corrugated , semi corrugated etc ) sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified & directed by Engineer-in-charge.

S &F Framed work of Fe 410 -W (Gde E- 250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed by Engineer-in-charge.

S & F Joist, channel, angle, or tee sections of Fe 410 -W (Gde E- 250) quality A, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified & directed by Engineer-in-charge.

M&L for Preparation of new steel surfaces of any description priming with red oxide with two coats synthetic enamel paint, over 10cm in width or girth, complete all as specified & directed by Engineer-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed by Engineer-in-charge.

M&L 5cm Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified & directed by Engineer-in-charge.

S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified & directed by Engineer-in-charge.

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified & directed by Engineer-in-charge.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified & directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed by Engineer-in-charge.

Prelaminated particle board, 18/19mm interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified & directed by Engineer-in-charge.

S&F, anodised aluminium snap grid frame work for false ceiling having size of grid 605x605mm complete all as specified & directed by Engineer-in-charge.

S&F 12mm Medium density fibre board ISI marks, exterior grade, fixed to timber framework with screws to frame work complete all as specified & directed by Engineer-in-charge.

M&L Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads exc 3 & n.exc 6 Sqcm fixed with screw and nails as in frame work 2nd class soft wood complete all as specified & directed by Engineer-in-charge.

M/S MAYA CONSTRUCTION COMPANY