REPAIRS/ CLEANING TO SEWAGE LINES, SEPTIC TANKS, MANHOLES, FILTER BEDS SOAK WELL AND CERTAIN MISC WORKS IN ANURAG, MES KEY PERSONNEL QTRS, DRDL DSC COMPLEX, GE OFFICE COMPLEX UNDER AGE B/R-I, HYDERABAD

Amount

Cleaning of sewage lines of the following dia by Roding/Mechanical spreacer from manhole to manhole, removing the materials obtained from sewage line including cleaning of manholes and flushing with clean water complete all as directed.

Sewage line of 100mm dia

Sewage line of 150mm dia

Sewage line of 200mm dia

Cleaning of Gully traps of any size and any depth by removing the material (sludge materials) and placing back the cover in position complete all as directed.

Cleaning of Septic tanks by sewar suctuion machine device of the following capacity by dewatering all the water, taking out the sludge/night soil, in order to remove all stacked mud/sludge etc., cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as directed.

Removing of soaked material from the existing soakage pits of any size and from any depth in foul condition and supplying & filling, spreading broken brick bats of gauge 80mm to 150mm in 25cm thick layers complete all as directed.

Removing of blockage from 'S' trap/'P' trap/ Nahani trap/floor trap by flushing or by sucking by suction pumps at GF/Ist/IInd/ IIIrd floor including cleaning the line up to 1st manhole complete all as directed

Clearing the urinal blockage of any length and dia by Roding and removing the materials (sludge) to distance not exceeding 50m all as directed.

Clearing WC blockages up to 1st manholes any length and dia by Roding and removing the materials (sludge) to a distance not exceeding 50m complete all as directed.

Cutting into existing manholes for connecting new drains of internal dia of pipe 100mm, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required and making good the disturbed surface complete all as directed.

All as per Sl item No. 11 here-in-before, but for internal dia of pipe 150mm complete all as directed.

All as per Sl item No.11 here-in-before, but for internal dia of pipe 200mm complete all as directed.

Excavating in trenches n. exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/dense soil complete all as directed.

All as per Sl item No.11 here-in-before but depth exc 1.5m and n.exc 3.0m complete all as directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including demolition of existing brick work complete all as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation/as in filling of sunken floor etc including demolition of old existing concrete complete all as directed.

M & L for plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) in coping, benching etc including necessary form work including demolition of old existing concrete complete all as directed.

M & L for salt glazed stoneware drain pipe of grade 'A' laid in trenches and jointed in cement mortar (1:2) of following dia including demolition and breaking up of salt glazed stone ware pipe set in cement mortar and complete all as directed.

SWG pipe of 100mm dia

SWG pipe of 150mm dia

SWG pipe of 200mm dia

M & L for TMT bars 8mm dia and over cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia all as directed

M & L for pre-cast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in cover slabs including necessary from work etc., complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.

Returning, filling in, with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as directed.

Cutting of existing road of any type and up to any depth, laying the CI pipe in desired slope, jointing, refilling the excavated material and making good the road surface with 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) complete all as directed.

S & F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors including taking down old pipe complete all as directed

S & F PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors including taking down old pipe complete all as directed

S & F in repairs PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as directed

S & F in repairs PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as directed

Taking down Cast iron drain pipes 100mm dia fixed in walls , jointed in cement mortar and S & F for Cast Iron soil waste and vent pipes 100mm bore in any length with or without ears, with cement joints , fixed to walls, complete all as directed

Taking down Cast iron drain pipes 100mm dia fixed in walls , jointed in cement mortar and S & F for Cast Iron soil waste and vent pipes 75mm bore in any length with or without ears, with cement joints , fixed to walls, complete all as directed

S & F in repairs for CI bends (any radius) suitable for 100mm bore pipe complete all as directed

S & F in repairs for CI bends (any radius) suitable for 75mm bore pipe complete all as directed

Taking down cement plaster of any description on cement concrete surfaces ,scrubbing down with water and M& L for rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces of ceiling etc, finished even and smooth without using extra cement complete all as directed.

Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water and M/L for Rendering 10mm thick in CM (1:6) on fair faces of walls and concrete surfaces etc, finished even and smooth without using extra cement complete all as directed.

M/L for Preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coats Oil Bound Distemper over a coat of primer, complete all as directed.

M/L Plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate), 25 mm thick as in sub base of floors finished even and fair including demolition of old concrete, complete all as directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar (1:4) including dismantling of existing tile complete all as directed.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match laid on and including 15 mm thick screed bed in cement mortar (1:4) , including dismantling of existing tiles including cement mortar bedding (but not bakcing), complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar (1:4) as backing coat including dismantling of existing tile complete all as directed

M & L for coloured glazed ceramic tiles of size 450x300x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar (1:4) as backing coat including dismantling of existing tile complete all as directed

S&F Vitrified ceramic tile 10mm thick Light shade(square/rectanguler) polished, area of each tile n exc 0.36 Sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, over existing floor ,including 15mm thick screed bed in cement mortar (1:6),including dismantling of existing tile complete all as directed

All as per item No. 45 here-in-before but on vertical surfaces as in skirting/dado but over rendering 10mm thick in CM 1:3, complete all as directed

Dismantling of stone slabs and tiles of any discription or thickness in floors, aprons,risers etc and M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, risers, dado, skirtings, landings, floors, and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as directed.

M & L for Moulding half round to granite edges of 20mm thick including polishing complete all as directed.

M & L for providing anti skid grooves in granite stone steps complete all as directed.

S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, 'P' or 'S' trap, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as directed.

S/F in repairs vitreous china pattern 'Squatting pan, white china orissa pattern 'Squatting pan', white of size 580x440mm with integral foot rest (excluding flushing cistern and flush pipes) but with cement concrete bedding and 'P' or 'S' trap, including PVC pipe upto finished floor level to connect flush pipe, making good the distrubed surfaces to match with the adjoining surface complete all as directed.

S&F in repairs vitreous china, white, urinal, Half stall type inlcuding providing PTMT spreader and fixing plugs, bedding urinal against wall in cement mortar (1;2) securing urinal to plugs with and including 60mm long screws, pointing around urinal back in cement ,connecting water pipe and waste pipe complete all as directed.

S & F in repairs WHB vitreous china of size580x450mm, 'Flat back or angle back type', coloured including cutting for & pinning in ends of brackets or existing stand including PVC waste pipe and waste couplilng fitting 32mm complete all as directed.

S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve float and handle along with suitable flush pipe/bend including brackets, complete all as directed.

S & F in repairs 15 mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed

S & F in repairs bib cock, cast copper alloy, chromium plated of size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed.

S & F in repairs angle cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butter fly handle, srewed both ends for iron pipe or for unions, complete all as directed.

S & F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed.

S&F Steel water tubing, medium grade, galvanized of 15mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including taking down old existing pipe complete all as directed.

S&F Steel water tubing, medium grade, galvanized of 20mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including taking down old existing pipe complete all as directed.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 1000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as directed.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 2000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as directed.

S & F in repair ball valves of 25mm dia PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed.

M & L in repairs for 75mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed.

M&L in repairs grating doom 100mm dia of Cast copper alloy chromium plated complete all as directed.

M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:4) , complete all as specified and as directed including demolition of old existing stone masonry complete all as directed.

M&L for raised pointing to Random Rubble Masonry brought upto courses in Cement Mortar (1:4), including raking out cement mortar joints on Random Rubble masonary wallcomplete all as specified and as directed.

M&L Plain cement concrete type B2 1:2:4 (40 mm graded aggregate) in walls or retaining walls any thickness size or shape including pilasters buttresses columns pillars boundary pillars and posts (including caps and bases) including demolition of existing concrete complete all as directed

M&L Cement Concrete (1:3:6) Type C2 (20mm Graded Stone Aggregate) as in Surface Channels and Drains, etc., including Use and Waste of necessary Form Work, including demolition of old existing concrete complete all as specified and as directed.

Labour for cleaning of weeds, mud, sand, etc from storm water drain including, excavating of rubbish off from site in foul position, complete all as specified and as directed.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straing and fixing to nay type of standard rails, straining bolts incl securing or tying at crossings with and provision of galvanised mild steel wire, staples and pins etc, complete all as specified and as directed.

Restraining resucuring including making good staples etc, steel barbed wire any dia barbed with barbs spacings, complete all as specified and as directed.

Fixing chain link fencing incl line wires any mesh size and type to any type of standards and incl provn of binding wire, including dismantling of old damaged existing fencing complete all as specified and as directed.

Supply only chain link galvanised fencing any type or size, complete all as specified and as directed.

S&F MS work as in fencing post and strurts incl cutting tops to make shape as directed, drilling holes, notching for wire etc, flate iron fillet ( for securing wire mesh etc) incl all necessary drilling, bolting, riveting etc and similar work, including dismantling of existing steel work of any description complete all as directed

Framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe- 290. Gde E-165 including dismantling of existing steel work of any description complete all as directed

S&F in repairs for Welded steel wire fabric supplied and fixed complete to wood or steel members, weight per square metre n.exc 4 Kg, complete all as specified and as directed.

S&F Roof trusses (framed) trussed,purlins, crane gantries rail and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats including dismantling wrought or mild steel work of any decription complete all as directed

M&L for Preparation of new Steel and iron surfaces exc 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L Pre painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of existing asbestos cement (corrugated/semi corrugated ,etc) sheets complete all as specified and directed..

S & F ventilators with top hung shutter including hinges, steel peg stay, including taking down old ventilators complete all as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel hinges and steel peg stay complete with glazing bars, dovetailed or welded, including taking down old windows complete all as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel hinges and steel peg stay complete without glazing bars, dovetailed or welded, including taking down old windows complete all as directed.

S&F venetian blinds fabric blinds vertical type including all necessary fittings of approved colour to match the existing size and quality including taking down existing venetian blinds of any type completely with fitings of any type and description complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated (thickness of powder coating not less than 50 mircon) aluminium sliding/hung window shutters with aluminium chowkat, aluminium section weghing 0.55 kg/m including necessary 4.8 mm thick glass,joining cleats, glazing clips, rubber neoprene packing handles (200 mm long) 2 Nos in each window, hinges, anodised aliminium snap beading sceres etc. including taking down existing window complete all as specified and directed.

Disconnecting water storage/service tank (RCC/PVC tank) exc 250 Litre but not exc 500 Litre capacity, cleaning and removing all scales Dirt, etc from Tank and mouths of circulating and wash out pipes of Tank with bleaching power. Re-hoisting in same position and re-connecting, including writing DATE OF CLEANING and DUE ON complete all as specified and as directed.

All as per item No-87 above but exc 500 ltr but not exc 1000 Litre capacity,

All as per item No- 87 above but exc 1000 ltr not exc 2000 Ltrs

S&F in repairs polycarbonate sheet 10 mm thick fixed with aluminium profile top at joint, aluminium section 50 mm wide with 2 mm thick including fixed with self tapping screw and full welding of 10 mm thick, scaffolding and wastge maetrial for fixing in doom complete all as specified and directed.

S&F S/S grade 304 railing 50 mm dia hand rail and 3 Nos 16 mm dia horizontal rails and 40 mm dia verticles complete incl grinding and buffing at joints all as specified and directed including taking down old existing railing.

M&L for broken glass coping on top of RR walls set in cement mortar (1:3) including taking of old broken glass from top of the walls and removing the rubbish complete all as specified and directed.

Razor concertina coil 600 mm dia (50 spirals per coil) weight 8 Kg approximately (+ 5%) expandable 6-8 mtr consisting of 2.6 mm dia heavy galvanised high tensile spring steel wire as per IS 4454, including taking down old concertina coil complete all as specified and directed

Sai construction & services

SAI ENTERPRISES

sanjar enterprises