REPAIR AND RENOVATION INCLUDING FURNITURE WORK IN CAMP OFFICE OF HONBLE MINISTER TAD AT TRI ASHOK NAGAR UDAIPUR

Amount

Furniture Work (NON BSR ITEMS)

Supply and Istallation of Computer Work Station of unit Size 750 mm X 600 mm X 750 mm. Work Top- Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with post formed edge moulding on one side and 2 mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused with board on other thre sides. Understructure supporting frame consist of Metal C Legs type made up of 50 x 50 x 1.6 mm and Wire Carrier leg of 50X50X1.6 mm in placed alternatvely and are connected with horizontal cross connectors of of 40mm x 40mm X 1.6mm thick MS Pipe between supporting vertical legs. The MS Pipes shall be finished with epoxy powdercoated with DFT of 50-60 Micron confirming to IS 13871:1993. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm. Wire management-The Vertical/Electrical duct & Horizontal Cable tray (wire carriers) are made of CRCA & fixed to the understructure below worktop with specially designed brackets. Provision for fixing Switch plates are privided in the cable tray for easy access through wire mangaer or PVC grommet. Screens/privacy panel:- Screen height will be 300 above work-top made of prelam particle board/White Board alternatively as approved by Engineer-in-Charge.

Supply and Installation of Office table as per approved design and as directred by Engineer-in-charge Work Top-Work top shall be made 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post foming on front and back and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides Understructure- C-type leg shall be made of 50X50X1.6mm thick vertical member and 40x40x1.6mm thick M.S. pipe of Horizontal/Cross member confirming 15-Grade 4923 shall be finised shall be finised with epoxy polyster powder coated DFT 50-60 Mieron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross members shall be mounted by end brackets made of 3mm thick 15 513: 2008 CRCA sheet shall be finised with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993. Wire management-Electrical wires shall be carried from horizontal/ vertical duct made of 0.7mm CRCA sheet confirming to 15 513:2008. Switch Plate or Cromet depending upon requirement shall also be provided for electrical/LAN connection on table top. Modesty Panel-Modesty Panel of height 450 mm shall be made of 1.2 mm thick CRCA sheet confirming to I5 513: 2008 and shall be finised with epoxy polyster powder coated DFT 50-60 Micron. Side Storage body-Storage top shall also be made of 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post forming on two sides and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides.

The body of storage units shall be made of 0.8mm thick CRCA Sheet and skirting shall be of 1.2mm thick CRCA sheet confirming to 15 513: 2008 finished with epoxy powder coated of DFT 50-60 Micronconfirming IS 13671:1993. Internal Shelves shall be also made up of 0.8mm CRCA sheet confirming to 15 513: 2008 and shall be mounted with the Metal shelf support pin made of 2mm thick CRCA sheet with Nickel or Chrome plating. M10 screw leveler is given with height adjustment up to 12mm to 15mm. Back storage should be in complete18 Prelam particle board matching with similar colour shade : structure made in 18 mm plpb The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Main table size 1800 x 750 x 750, Side storage 900 x 450 x 750, Back storage 1800 x 450 x 750,

Main table size 1650 x 750 x 750, Side storage 900 x 450 x 750, Back storage 1800 x 450 x 750,

Supply and Istalltion of Library Open book Shelf (Single Side )of Sizes 1800 mm x 900 mm x 316 mm body made up of of 0.8mm thick CRCA Sheet and skirting of 1.2mm thick CRCA sheet confirming to IS 513: 2008 with epoxy powder coated finish (DFT minimum 50-60 micron). Shelves shall also be made up of 0.8mm CRCA sheet confirming to IS S13: 2008 and fixed with CRCA sheet brackets of approved design. Number of adjustable shelf shall be five with six loading levels. Load bearing capacity of the shelf shall be 30Kgs UDL. The construction shall be aesthetically appealing completely welded. M10 screw leveler is given with height adjustment up to 12mm to 15mm

Visitor Chair Made Of Good Quality Products MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . Seat & Back Are Firmly Connected To The Base . Chair Max Height . Base Seat 60mm Thick Moulded With PU Foam &Back Seat 60mm Thick Moulded With HD Foam . Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

HB H : 1140 ±10 X W : 715 ±10 X D : 715 ±10 . High Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2 . Machanism Provided Upright Position Locking . Chair Max Height 1140 & min Height 1055 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 640H Back Seat 60mm Thick Moulded With HD Foam. 220x500/640 Arm Rest Fitted To The Seat With Armrest Connecting Brackets. Tilt Adjustment Can Be Operated In Seating Position . Armrest Should Be Injection Moulded From Black Nylon . Height From Seat To Ground 450mm. Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 665mm Without Casters. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm Without Casters . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

Supply and Istallation of One 2-Seater Sofa (1550 X 785 X 675 mm) one 3-Seater Sofa of overall sioze (1950 X 785 X 675 mm Dunderstructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back, The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with eatherette. LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM PVC composition Legs are made of SS 304

Supply and Istallation of two 2-Seater Sofa (1550 X 785 X 675 mm) Dunderstructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back, The seat is made up of PU foam with density 32+/-2 Kg/m3 having an additional top layer of PU foam with density 28+/-2 Kg/m3, upholstered with leatherette. The back is made up of 28+/-2 Kg/m3 with additional top layer of PU foam with density 23+/-2 Kg/m3, upholstered with eatherette. LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM PVC composition Legs are made of SS 304

MB H : 1010 ±10 X W : 715 ±10 X D : 715 ±10. Medium Back Chair Made Of Good Quality Products MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2. Machanism Provided Upright Position Locking . Chair Max Height 1010 & min Height 925 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 510H Back Seat 60mm Thick Moulded With HD Foam . Tilt Adjustment Can Be Operated In Seating Position . 220x500/640 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon . Height From Seat To Ground 450mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 665mm Without Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm Without Casters . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

Office Table made of Pre-laminated table top of size 1200 X 590 X 735 mm with one drawer unit made of 0.5mm thick CRCA sheet. The table top shall be supported over legs consists of MS ERW round tube of 25.4 x 1.2mm and Cross Horizontal Members including Leg rest of 25.4 x 1.2 mm ERB tube. All steel components be shall be finised with epoxy polyster powder coated 50-60 Micron.The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Hard foam mattress with 40 density size 1750 x 820 x 100 mm of standard size : with pillow & cotton bedsheet

Bed Overall Size : 2005 mm Lx 950mm W X 650mmH1X400mmH2, Headrest of size 280mm Made in 1mm Sheet and footside sheet panel made in 1mm also provided as per attached image : 12-14mm MR grade Ply will be used for mattress. Bed leg framein 50x25x1.2 mm and Mattress panel will be supported on minimum 3 supports combination of size 25x25x1.2mm & 20x20x1.2mm pipes : Mattress panel height should be 400mm . Complete structure should be duly powder coated

Electrica work (NON BSR ITEMS)

Supply, installation, testing and commissioning of latest model Digital EPABX console with 3 trunk lines & 8 digital extensions with two plan set ,of NEC/PANASONIC /APPROVED make.

Supply, installation, testing and commissioning of Digital telephone instruments of 12/24 keys of same OEM as EPABX console to enable proper hand shake.

Supply, installation and commissioning of DTH connection with dish,HD set top box, wall stand & one year Subscription of Airtel/Tata sky

Supply, installation & commissioning of Smart LFD signage display of screen size : 55'' (138 cm diagonal), in built two speakers, LED backlit type, wall/ table mount type of following specifications with making connectivity of devices with surveillance system with the help of signal/ 2 mtr. HDMI cables as required along with all accessories : SONY/LG/SAMSUNG/ BARCO/ NEC/ PANASONIC Make)

Resolution : 3840x2160 UHD

Brightness : minimum 450 nit

Scree type : Non touch

Duty Cycle : 24*7

Viewing angle : 178:178

Power : AC 100-240v 50 HZ

Supply & installation of Double door direct cool refrigerator of following specifications with all standard accessories etc as required of makes: Samsung / Whirlpool / LG

i)Star Rating: 5 star rated

ii) Compressor; Smart ccompressor

iii)Shelf type: Toughned Glass spill proof type

iv)Operating Voltage: 135 V to 290V AC,50 Hz

v) Gasket: Anti bacterial Gasket

vi) Capacity: 224 ltr to 242 ltr

Multi-Function Laser Printer (Colour) (A4):

Type :Laser, Colour

Print Speed: 15 PPM or more

Functions :Print, Copy and Scan

Duty Cycle (Monthly) :30000 Pages

Duplex Printing :Yes

Port :USB, Ethernet, Wireless

Tray :Input Tray: 200 sheets tray Output Tray: Min 100 Sheets

Scanner Type :Flatbed, ADF

Scan Speed :15 PPM or higher

Scan Bit (Depth) :24-bit

Certification :RoHS Compliance, BIS

Display :Touch Screen

Copy Speed :25 PPM or higher

Processor :600 MHz or higher

Operating System :Windows and Linux

Memory :128 MB or higher

Makes :HP / CANON / BROTHER /RICOH

12th Gen. Intel I5 23.8" FHD WVA 3 side Edgeglass Allin one Desktop With Alexa Built in (8 GB/512 GB SSD/Win11/MS Office 2021/IR Camera/Wireless Keyboard & Mouse ). Make:HP/DELL etc. or as approved by engineer incharge.

SITC of OFF LINE UPS of rating 800VA or above suitable for computer system with battry backup for 15 minutes.

On site OEM warranty for 1 years after date of installation

MAKE: BPE / MICROTEK /APC /PIXEL

Supply & installation of solo microwave oven of following specifications with all standard accessories etc as required of makes: Samsung / Whirlpool / LG

i)Capacity: 20 litre

ii)Type: solo i.e suitable for reheating,defrosting & cooking

iii)Power levels: Minimum 5

iv)Menu: with auto cook menu

v) Alarm: yes

vi) Cavity material: Stainless steel

vii) Child lock: yes

M/S RAJ CONSTRUCTION (BID ID -3082684)

M/S RAJ CONSTRUCTION (BID ID -3082684)