Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹39.6 L+₹1.7 L (4.56%)Rejected-Finance BEHIND POWER HOUSE WARD NO 6 UDASAR BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
₹34.7 L
EMD Value
₹69,400
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) NAL BIKANER
GE (AF) NAL BIKANER
AS DESCRIBED IN BILL OF QUANTITIES
2022_MES_560519_2
GE (AF) NAL/T-43/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) NAL BIKANER
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) NAL
₹69,400
Yes
21 Jan 2023
16 Dec 2022
7 Jan 2023
16 Dec 2022
5 Jan 2023
23 Dec 2022
16 Dec 2022 - 21 Dec 2022
Amount
M& L Cutting openings, through brick walls built in cement mortar for door, window and other opendings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m complete all as specified and as directed.
M & L for Forming jambs in cement mortar 1:4, etc. to openings ( to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.
M & L for Making good under cills or over arches, lentels and bressummers, including all pinning when necessary in cement mortar 1:4 , complete all as specified and as directed.
S&F Rolled steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle clats or other connecting plates and similar work, steel confirming to Fe 410-W(Gde E-250 Quality A) complete all as specified and as directed.
M&L for Reinforced concrete Type B1 1:2:4 (20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending sprially for hooping for columns, hooking ends and binding with and incl;uding mild steel wire (annealed) not less than 0.90mm dia or securing with clips , complete all as specified and as directed.
All as serial item No. 6 but 8mm TMT Bars as in stirrups.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutter frames, partitions, door shutters, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings where ever required including the cost of EPDM rubber/neoprene gasket required(fittings shall be paid for separately) with extruded built up standard tubualr sections/appropriate z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprenme gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing/panelling, cp brass/stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note : Glass and grill shall be measured and paid seperately.
S&F sheet glass ordinary quality of 5.50 mm thick and glazing with aluminium powder coating beading in square exc. 0.50 sqm each pane complete all as specified and as directed.
S&F Powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
S&F Mortice lock vertical type, of size 100mm for Aluminium doors of 4 Levers complete all as specified and as directed.
Taking down cement plaster on brick or stone walls /ceiling or on concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M & L 15 mm thick rendering on fair faces of bricks works or concrete surfaces in CM 1:4 mixed with integral water proofing compound as per manufacturers instructions (max 3% by weight of cement) and finished even & fair. Note :- WPC shall be paid seperately as supply only.
M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling surfaces, rendering finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for Brick work with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on internal surface of walls, rendering finished even and fair , complete all as specified and as directed.
M&L for two coats of oil bound distemper on wall surfaces over a coat of primer over two coat of wall care putty incl prep of newly plastered surfaces complete all as specified and as directed.
M&L for two coat of white wash on ceiling surfaces over a coat of primer incl preparation ceiling surfaces on newly plastered ceiling surfaces complete all as specified and as directed.
M & L Cutting holes in brick walls (depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick) built in lcement mortar or cement lime mortar and stone walls built in lime mortar complete all as specified and as directed.
S&F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, pintel hinges, hold fasts and similar small articles confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, et. To be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete and similar work confirming to Fe 410 W (Gde - E-250)quality-A complete all as specified and as directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railsings, framed work of water tanks and similar work conforming to Fe 290. Gde E-165 complete all as specified and as directed.
M&L for PCC type B1 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kervs not provided for in item 04028, water troughs and the like including weathjering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Excavating in post holes (or similar holes) each n.exc. 0.50 cum, geeting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm as in hard/dense soil complete all as specified and as directed.
S&F steel work as in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc complete and similar work steel confirming to Fe 410-W (Gde - E-250 quality -A) complete all as specified and as directed.
M&L for two coats of synthetic enamel paint on steel surfaces over a coat of primer incl prep of newly steel surfaces of any description over 10cm in girth complete all as specified and as directed.
S&F in repairs Aluminium body (extruded section) Door closer hydraulically regulated, designation No.3, universal type, suitalbe for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
M&L for complete removal of existing treatment on wall surfaces and applying two coat of oil bound distemper over a coat of primer over two coat of wall care putty complete all as specified and as directed.
M&L for preparation ceiling surfaces complete removal of existing treatment and applying two coat of white wash on ceiling surfaces over a coat of primer incl on complete all as specified and as directed.
M&L for Finishing walls with Acrylic smooth exterior paint of required shade on new plastered surfaces with two coats and applied @ 1.67Ltr/Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10Sqm complete all as specified and as directed.
M&L for complete removal of existing treatment on wall surfaces and applying two coat of Acrylic smooth exterior paint over a coat of primer complete all as specified and as directed.
Demolition of reinforced cement concrete of any description in chajjas, facias, parapet wall and similar suspended work and removing to out side MoD land complete all as specified and directed.
Form work to sides and soffits for fair finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L cutting chases pinning in concrete surfaces and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sun shades slabs not exc 10cm girth complete all as specified and directed.
S&F Reinforcement steell TMT bars 8mm dia and over cut to length & bent to shape required including cranking bending spirally for hoping for column, hooking ends & binding with mild steel wire not less than on 0.90mm dia or securing with clips complete all as specified and directed.
M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjas, facias upto any height complete and including neessary form work all as specified and directed. Note: Reinforcement shall be measured and paid for separately.
M&L for Armstrong 'Optra Acoustical Wall Panelling' or equivalent with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd. or equivalent and construction adhesives as per the instructions laid down by the manufacturer.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
S&F mild steel work for fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire etc, Flat Iron fillets(for securing wire mesh etc.), nosing to steps, side supporting of ducts, balusters including embeding in concrete and screwing etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed..
M&L two coat of synthetic enamel paint over a coat of primer incl prep of new iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched( ordinaery and counter sunk) forming holes, without any attachment and work conforming to steel FE-410-W(Gde-E 250 Quality-A) complete all as specified and as directed.
S&F Linoleum 3.20mm thick, plain coloured, laid dry in floors including stretching, cutting and fitting.complete all as specified and as directed.
Dismantling plain or corrugated roof sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F plain, galvanised, mild steel sheeting of 1mm thick, as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F PVC (SWR) Pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F (SWR) Bends 110mm bore of any radius complete all as specified and as directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, baliusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling jholes, notching for wiere, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for providing, cement concrete Type BO 1:2:4(12.50mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Demolition of cement Concrete of any description and in any position including any type of rooftreatment , PCC padding, lime concrete etc, complete all as spd and directed. Note: All demolished material / debries will be disposed off out side the Airforce station Nal with out any extra cost to the govt.
M&L for cutting grooves in brick wall for inserting APP membrane and other works size of grooves 75mm wide and 65mm deep and shapping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4 all as specifie and directed
M&L Cement concrete 1:2:4 type B1,(using 20 mm graded crushed stone aggregate) as in roof pedding complete all as specified and as directed
M&L 10mm thick screed bedding in cement mortar 1:4 mixed with water proofing compound @ 2% by wt of cement or as per manufactutrers instructions on concrete surface of roof and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge Note :- WPC shall be measured and paid separately.
M & L APP based polymeric membrane minium weight 3 Kg/Sqm and minium 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid by torch forced application over a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm laid over and including a priming coat using bituminious primer @ 0.40litre/ sqm, finally two coat of aluminium paint on top of APP membrance complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and ruibbish off the premises complete all as specified and as directed.
Demolition of cement concrete(unreinforced) as in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick PCC Type D2 1:4:8 (40mm graded crushed stone aggregate ) as in sub base of floors complete all as specified and as directed.
M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in Cement mortar 1:4 complete all as specified and as directed.
M&L for Vitrified Ceramic tiles 10mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade/Double charged/ultracharged of tiles complete all as specified and as directed.
All as per srl item no 62 above but as in vertical surfaces over 10mm thick backing coat in CM 1:4 for fixing of tiles.
M&L for Glazed ceramic colouired tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
S&F in repair Wash basin, vitreous China (Flat back or angle back type any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
Supply only Flush pipe 32mm of High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sqcm. For WHB complete all as specified and as directed.
S&F Waste coupling of CP bore dia of discharge pipe in 32mm (Half or full threaded). complete all as specified and as directed.
S&F in repair Floor trap(SWR)dia of out let in 75mm),pain with grating including jointing with solvent cement complete all as specified and as directed.
S&F Pillar taps bore dia of pipe in 15mm, cast copper alloy, chromium plated fancy type screwed down high pressure, with or without lettered Hot or cold withy long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and as directed.
S&F in repair Pillar taps bore dia of pipe in 15mm, cast copper alloy, chromium plated fancy type screwed down high pressure, with or without lettered Hot or cold withy long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and as directed.
S&F in repair Gun-metal, golobe or gate valves bore dia of pipe in 20mm, with Iron wheel head, screweed both ends for iron pipe and fixed. complete all as specified and as directed.
S&F in repair Angle stop valve of CP high pressure screwed for iron pipe and fixed, bore dia of pipe 15mm complete all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABVS wall hook including making connections and fixed in position complete in all respectr as specified.
S&F in repair vitreous china urinal half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flushj pipe, grating and union for discharge pipe complete all as specified and as directed.
Dismantling water tanks and removing to store of capacity in exc 250 & n.exc 500 Ltrs complete all as specified and as directed.complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of Cap 500 Ltrs complete all as specified and as directed.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or barass ferrule and fixed bore of dia of pipe in 20mm complete all as specified and as directed.
S&F GI Nipple suitable for 20mm dia of bore pipe for HDPE Water tank complete all as specified and as directed.
Taking down DB/ main switch/sheet metal enclousure of any size and making good disturbed surface of wall/ floor complete all as specified and directed. Note:- Temporary power supply shall be provided by contractor.
Taking out carefully the existing burnt sub main wiring of size 4 Sqm / 6 Sqmm PVC insulated multi stranded aluminum/copper conductor cable along-with earth continuity conductor from the PVC / rigid steel, concealed/surface conduit and making good the distubed surface all as specified and directed.
Taking down carefully point wiring (Light, fan, socket) complete including fittings such as switches, Ceiling roses, pendants, regulator, sockets etc removing from site of work and making good to the disturbed surfaces of walls/floors etc all as specified and directed Note:- Temporary power supply shall be provided by contractor.
Supply and laying Sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non metalic regid PVC medium conduit & conduit 20 mm dia ISI marked and allaccessories including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface complete all as specified and directed Note :- 2 run of 4 sq mm , 1 run of PVC conduit & 1 run of 4 sqmm cable shall be measured as single unit length.
M & L for point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC ,surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure haing zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Notes- [i] Wiring from the DB (distribution box) to terminal boxes for power plugs, fan regulators, switches, socket outlets, etc. shall be deemed inclusive in the quoted rates.
One light/bell point controlled by one switch, with cables 1.5 mm² size
One fan point controlled by one switch, with cables 1.5 mm² size
One switch socket outlet 3 pin 6 Amp on same board.
One switch socket outlet 3 pin 6 Amp on Independant board.
All as per description of serial item No. 83.00 here in before but for for One 3-pin socket outlet 15 Amp on independent board with 2.5 sqmm FRLS cable including 2.5 sqmm FRLS multistranded copper cable as earth continuity wire.
S&F in repairs energy saving decorating box type batten light fitting 230 volts surface mounted complete with high effeciency glare free light LED lamp 20 watt blue coloured end caps with all accessories, pre- wired, including providing flexible copper wire twin core cable complete all as specified and directed by enginer in charge.
S & F in repairs LED recessed ceiling panel Luminaire comprises of CRCA sheet metal body powder coated in white. The LED clusters are assembled in the body & special high translucent frosted diffuser is used for uniform glare-free light distribution suitable for 600 X 600 mm ceiling. Operating voltage range 140-270 volts ,36 watt, color temp 5700 K, color rendering index more than 80, including LED light driver and ceiling mounting accessories connecting up with three core flexible copper conductor cable of suitable size. MAKE : PHILIPS CAT PART NO RC370B LED30S-6500G6L60W60PSUODS6 equivalent with approved list of makes.
Suply and fixing Lamp holder angular PVC polycrbonate type with back plate suitable for PVC casing capping/conduit fitting .complete.
Supply and fix LED bulb 9 watt with lumen 850 complete all as specified and directed. Make :- Havell Cat Part No LHLDEUEEMC8R009 or equivalent with approved list of makes.
S & F modular type 2/3 pin combined shuttered type 6 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 2/3 pin combined shuttered type 16 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 6 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 16 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge
Supply and fix Ceiling rose surface Bakelite 65 x 50 mm three terminals complete all as specified and directed.
S&F in Repair sheet metal enclosure single pole and neutral encolsure with two pin and earth plug and socket complete with provision for fixing of one MCB SP 20 Amps complete all as specified and directed.
Supply and fixing in repairs vertical TPN DB double door suitable for fixing 100 amp MCCB, IP 45 protection with powder coated enclosure 4 way insulated busbar assembly rating 200 Ampswith and including MCCB 4 pole, 415 V, 100 A, 16 kA - 01 No complete all as specified and directed. Make : Havells Cat part No DHDLVDRWGOFO04 HSN No 8537 or equivalent with approved list of makes.
Supply and fix as in repairs MCB DB single pole and neutral 240 volt SPN 04 way with 200 Amps rated bus bar double door type complete all as specified and directed. Make :- Legrand /L&T/Havells
All as per description of serial item No. 96.00 here in before but 8 way.
Supply and fix in repairs MCB SPN 10 to 32 Amps 10 KA 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and directed.
Supply and fix in repairsMCB SP 6 to 32 Amps 10 KA 'C' curve 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and directed.
M&L for taking dowon wall fan after diconnection of electric cable and removing the same to MES store yard and refixing the same on its original place after civil work complete all as specified and directed. Note- cost of reinstalling the fan at original location shall be incluided in the quoted rate.
M&L for earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.50 Mtr below ground level. The earth plate to be connetced with earth lead of 32x6 mm galvanised ms strip wire all as specified and directd.The GI earthing strip to be protected by galvanised iron pipe 40 mm bore (medium grade) up to ground level and there after with 40mm dia HDPE pipe up to test point. Earthing shall be include with providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth plate further filled with 60 cm thick Tibba sand and 2nd layer with 30 cm of Magnesium sulphate powder (compact thickness ) , 3rd layer with tibba sand up to the ground level. Earthing shall also be include for providing concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work all as specified and directed.
S & F modular cover plate with frame, 8 Module , complete all as specified and directed. Note- Modular switches, sockets & Cover plates with frame shall be of same make & model.
all as per item 102 above but 6 Module
all as per item 102 above but 3 Module
S&F rectangular modular flush mounted Sunken block for 8 modules suitable for mounting, Modular switches & sockets, complete all as specified and directed.
all as per item 105.00 above but 6 Module
all as per item 105.00 above but 3 Module
S&F energy saving LED foot light 230 volts ISI marked flame retardent UV stabilized and unbreakable polycarbonate material child proof sockets for extra protection unique and effective dual knob locking mechanism rust free powder coated sturdy inner plates smooth finish pre wired complete all as specified and directed.Make- Havells Crabtree CAT Part No- ACAPFCGL04 4M or equivalent with approved list of makes.
S&F EXIT sign boards with edge lit long life LED indicator 230 volts transparent acrylic panel with double side option, wall mounted incluiding power pack upto 6 hrs in emergency condition and CRCA Housing duly powder coated finish, screen printing made on photo luminescent sheet pasted on 1 mm thick aluminium sheet energy saving glow in dark type and signages and inscription made by way of computerized vinyl cutting and lamination complete all as specified and directed.
S&F energy saving decorative type wall lightstainless steel rust free fixture with white glass diffuser suitable for 9w LED light 230 volts ISI marked complete with all accessories pre wired, incluiding providing flexible copper wire twin core complete all as specified and directed.Make-Havells cat part number LHFOAJD1TZ1I060 or equivalent with approved list of makes.
Supply and Fixing of five star rated wall mounted Geysers of cap. 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff including electrical and water connection and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed.
Supply and fix 15mm size brass CP bib tap standard complete all as specified & directed.
Supply and Fixing CP angle valve of size 15 mm dia complete all as specified and as directed.
S & F in repair PVC connections 15 MM size with PTMT nuts of length 600mm complete suitable for Hot & cold water, complete all as specified and as directed.
Taking out old uncerviceable cable XLPE/PVC sheathed 1100 volts grade armoured with aluminum conductor of any size from trenches, wall, poles, under floor etc all as specified and directed.
Suplying, laying, jointing and testing of under ground cable XLPE insulated , 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 50 sq mm laid in trenches/ duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and direected. Note :- Earth work shall be measured and paid seperately.
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed .
Returning filling in,. Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.
Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed.
M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured.
S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as specified and as directed.
BIDAWAT ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .