Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L1 | Accepted-AOC L1 bidder found reasonable | |
| 2 | L2₹38.0 L+₹77,320 (2.08%)Rejected-Finance 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Higher rate quoted by bidder | |
| 3 | L3₹39.3 L+₹2.1 L (5.67%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Highest rate quoted by bidder | |
| 4 | Rejected-Technical AA CLASS PWD CONTRACTOR DISTT BARMER | BARMER | RAJASTHAN | - | Rejected-Technical not meeting eligibility criteria |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
HQ CWE AF JAISALMER
REPAIRS AND MAINTENANCE TO CERTAIN ROADS IN DOMESTIC AREA AT AF STN UTARLAI
2022_MES_558164_1
80212/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF UTARLAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF UTARLAI
₹80,000
Yes
5 Dec 2022
17 Oct 2022
16 Nov 2022
17 Oct 2022
14 Nov 2022
31 Oct 2022
Amount
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or air compressor blower to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of grade VG-10 at the rate of 5.00 Kg per 10 Sqm on black top bituminious surfaces etc and providing bituminous premix semi dense asphaltic concrete 30mm consolidated thickness using paving bitumen VG-30 with 5.5 % binder by weight of total mix, by means of self propelled mechanical paver, rolled and compacted the surface to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 5.5% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 5.5%, no price adjustment shall be made for the same. (ii) Job mix formula for Semi dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.
M & L for premix bituminous macadam (Consolidated thickness 75mm or less) using paving bitumen (VG-30) 4% by weight of total mix, spread, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 4% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 4%, no price adjustment shall be made for the same. (ii) Job mix formula for premix bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.
M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.
M&L for marking 2.5mm thick centre line side line stop line, dashes, arrows, brackets & similar work; 10cm wide and over on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temperature of 160 degree centigrade with a special applicator machine complete all as specified & directed.
Demolition of brickwork or stone/boulder masonry and precast block masonry for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified & directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.
M&L for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthethic enamel paint of approved different tints and pattern over a coat of primer etc complete all as specified and directed.
M&L for preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthethic enamel paint of approved different tints and pattern over a coat of primer etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles from site store and rubbish off the premises complete all as specified and directed.
M&L for 60mm thick M-35 Grade factory made Rubber moulded coloured (Machine pressed) precast concrete interlocking paver blocks/tiles any shape and size with grey cement and pigment conforming to IS 15658-2006 laid over complete all as specified and directed.
M&L for 80mm thick M-40 Grade factory made Rubber moulded coloured (Machine pressed) precast concrete interlocking paver blocks/tiles any shape and size with grey cement and pigment conforming to IS 15658-2006 laid over complete all as specified and directed.
M&L for factory made precast coloured chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM (1:6) complete all as specified and directed
M&L Sand filling under floors or in foundations including watering and conslidation complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided as in floor/paving/hardstanding and removing the same upto 1.00 KM or outside the MD land complete all as specified and directed.
M&L for cement concrete work in pavement/hardstanding of flexural strength 40 Kg/Sqcm in field using 400 Kg of cement per cubic meter, thickness of cocrete 25cm or less including finishing surface concrete floor/paving/hardstanding, by brooming when concrete is green complete all as specified and directed.
M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and foundation, filling and mass concrete comlete all as specified and directed.
M&L for forming construction joint 10mm wide and 30mm deep and filling with sealing compound Grade 'B' complete all as specified & directed.
M&L for forming contraction (dumy) joint 65mm deep and 10mm wide filled with sealing compound Grade 'B' complete all as specified & directed.
M.D. CONSTRUCTION CO.
m/s jogaram sujaram
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
recovered-award.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .