WBPWD/EE-I/CKHED/NIQ-59/ 2023-24

Amount

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (Gloster / Havells / KEI)

4 core 70 sq. mm.

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable 3/3.5/4 core 70 sqmm to 95 sqmm [PWD/GS Page: F-1 Item: 2/d]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. From 70sqmm to 150sqmm [PWD/GS Page: F-3 Item: 6/ii]

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. [PWD/GS Page No.: F-4 Item No.: 7/c]

4 core 70 sq. mm.

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. [PWD/GS Page No.: F-5 Item No.: 8/b]

4 core 70 sq. mm.

Supply & Fixing of perforated GI Cable Tray with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&FGI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. [PWD/GS Page No.: D -15 Item No.: 34/a/ii]

200x50x1.25mm (18SWG) Cable Tray

S&F double door 12-Way Vertical TPN MCB Distribution board for 250A MCCB incomer with IP-42/43 protection, on angle iron frame on wall incl. Inter connection & provision for earthing attachment (Legrand)

S&F 415 V L&T 160A 4- Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection[PWD/GS Page: D-8 Item:10]

Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand )

63A TP MCB

32A TP MCB

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Havells/Polycab/ RR) in 25/30mm size PVC Rigid Conduit 'FR' (Precision make-HMS/MMS) incl. necy. fittings as required. [E14:1b(v)] 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC.

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. 6sq mm.

Supply and fixing 4-way MCB SS enclosure with IK-08 protection, powder coated & S&F of 63A,4pole Isolator in DIN channel, concealed in wall after cutting the wall & mending good the damages to the original finish or total establishment on flat iron frame in wall incl. inter-connection with suitable size of copper wire, necy. painting,& provision for earthing attachment etc. as required.[Legrand 507793]

Supply & Fixing Moisture proof,water-proof (outdoor type IP-65) PVC (Hencel)looping cable box size 300x250x150mm deep having 2/3 mm thick body enclodure comprising of one no.415 V,63Amp FP Isolator on din channel ('C'-curve,legrand make), with 4way copper terminal and having lined with rubber gasketed top cover should be fixed on wall by screws,nuts,washers etc, necy. socketting, rubber gasketted entry and exit as mending the good damages as original with proper finishing at terminal is required.

Supplying & fixing of 415V, Timer DB Fixed on Wall by flat iron/Angle frame or as per direction of EIC . The Box should comprising following accessories......... A).Double-door SPN-MCB Distribution Board with IP-42/43 protection 2+10 way make Legrand/Eqv. EIC Approved. B). 1No. 250V ,50Hz,16 Amp Digital daily & weekly time switches(Make L&T-67DDT0/Eqv. legrand) C)1No 415V,40A FP-Contractor(Make-L&T/Eqv. legrand). D)1No. 415V,40A FP-MCB(Make-L&T/Eqv. legrand). The complete arrangement must be wiring by suitable size of PVC insulated Cu wire with suitable socket/lugs as per requirement & direction by EIC .

Dismantling the existing exaust fan & Filling the existing Former 15" wall cutting for existing exaust fan & cover it by S&F bakelite/ perspex cover sheet by making holes nuts,screws,washers etc as per recuirement.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

STANDARD BUILDERS

ELECTRO MECHANICAL CORPORATION