SPECIAL REPAIR TO BLDG NO TE-65, TW-430 AT NEW LOC ASC BN ILP AND BLDG NO TE-234 (ISOLATION WARD), TW-302 (JCO WARD) AT MH AT DAHUNG AND MD ACCN BLDG NO P/S/1A TO P/S/1D AT RUPA UNDER GE TENGA

Amount

Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 25 mm thick complete all specified and directed by Engr in charge.

Demolition floor, hearth or tiling including cement mortar bedding (but not backing)), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding .36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in floor surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles complete all as specified and directed.

M & L for 300x200x7 mm thick Glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white or colour cement to match the shade complete all as specified and directed.

M & L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match pointed in white/coloured cement to match the shade complete all as specified and directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15mm thick screed bed of CM 1:4 complete all as specified and directed

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Fixing only 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gates and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed.

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete all as specified and directed.

M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall complete all as specified and directed.

Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces mixed with water proofing compound @20 ml/50 Kg of cement, finshed fair and even without using extra cement complete all as specified and directed. (WPC shall be measured and paid for separately).

Supply only Integrated water proofing compound ISI marked .

M & L for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 with WPC 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid for separately).

Supply only Integrated water proofing compound ISI marked .

M & L for 15 mm thick plaster on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even & smooth with neeru finish complete all as specified and directed.

Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistance primer complete all as specified and directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer complete all as specified and directed.

M&L for preparated of old painted wall surfaces ans applying two coats of oil Bound Distemper complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed.

M&L for Preparing old plastered surfaces of ceiling and applying one coat of whitewash..

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation complete all as specified and directed.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets

S&F for providing 4 mm thick "E" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x0.70 mm wall/ceiling angle 25 x 25 x 0.35mm thick and hanging with 4 mm GI wire all fixed arrangement will be done as per manufacturer instruction incl of oil bound distemper anirected one coat of white wash complete all as specified and directed.

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces completed all as specified and directed by Engr-in-Charge.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces completed all as specified and directed by Engr-in-Charge.

M&L for 2nd class Hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3. but n exc 6 sq.cm. complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame to match all as completed and specified as directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc for securing glass etc., sizes of members of shutters as specified in SSR Part-I , Section-8, Class-8.24 (a) supply & fitted to chowkats

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.

M&L for prelaminated particle board 18/19mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in shutters for cup board & kitchen shelves.complete all specified and as directed.

Sypply & Fixed 20mm thick 2nd class hard wood clean swan with butt joints in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed.

S&F 75mm Hasp and staple, aluminium anodised with mild steel hinge pin including blt to hinge plate and fixed with screw complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece complete all as specified and directed.

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F sheet glass 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc. complete all as specified and directed.

Supply and fix 125mm size aluminium anodized handle fabricated type

Supply and fix aluminium anodized barrel tower bolt 125mm long extruded section.

S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed”

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement complete all as specified and directed.

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.

Dismantling of water tanks exc 500 ltrs & n. exc 1000 ltrs capacity and removing to store.

S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S & F Polythene water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

Demolition and breaking up CI/AC/PVC drain pipes (Salt glazed ware, AC or Reinforced concrete) of any dia.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore.

S&F PVC (SWR) bends any radius, 110mm bore with access door.

S&F PVC (SWR) bends any radius, 75 mm bore with access door.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore.

S&F PVC (SWR) vent cowl 110 mm bore

S&F PVC (SWR) couplers 110mm bore.

S&F PVC (SWR) WC connector 110mm dia.

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified

S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified

Taking up or down 15 mm bore steel water tubing and connections including cl for refixing or removal to store

Refixing 15 mm bore old steel tubing and conncetions in new or old position to walls

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Taking up or down 20 mm bore steel water tubing and connections including cl for refixing or removal to store

S&F of 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S & F vitreous china wash down water closet pan (pedastal pattern) white incl PVC (SWR) 110mm 'P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Squatt pattern) white incl PVC (SWR) 110mm 'P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair vitreous china squatting pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) pipe, etc complete all as specified and directed.

S&F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level ,with flush pipe of polythylene of low or high density or PVC 32mm dia for low level cistern white with inlet ball valve float chain and pull and brackets complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S&F in repair 15mm Stop valves/ Angle valve alloy,screwed down , high pressure,with crutch or butterfly handle,screwed both ends for iron pipe but fancy type,chromium plated complete all as specified and directed.

Supply and fix in rep 15mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S& F in repair Chromium plated shower rose 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in Repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

S & F PVC connecting pipe 600 mm long complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded aggregates as in surface channels and drains complete all as specified and directed.

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 116 here in before but for one 3 pin socket outlet 5/6 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 116 here in before but for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

All as per item No. 116 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq.mm size complete all as specified directed.

All as per item No. 116 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

S&F Socket outlet 2 in 1, 6 pin, 6 amp flush type

S&F Socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fixing lamp holder, insulatted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less than 0.85 (min). Make- Havells/Crompton/Syska

S&F LED light fitting 1x 20 Watt 220 volt AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150/250 mm

Supply and fix exhaust fan, steel body AC single phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fix in replacement exhaust fan, steel body AC single Phase 230V50 Hz, RPM 1200, Copper winding of size 300m sweep with, blades, and frame and louvers

Supply and fix sheet metal enclosures for DBs Double Door when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F in replacement MCB DB double door TPN 4 way sheet phospetised powder painted with 200 Amps rated bus bar 415 Volts neutral link, IP 43 protection double door type fixed on wall duly grouted in solid block or wooden board complete all as specified and as directed.

S&F MCB SPN having braking capacity 10KA, 32 Amps, C Curve 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, C Curve 240 V complete all as specified and directed.

S&F in replacement MCCB 4 pole 415 Volts, 50 Hz, 16 KA of capacity 63 Amps complete all as specified and directed.

S&F in replacement MCB SPN 40 Amps, 240 Volts, 10 KA complete all as specified and directed.

S&F in replacement MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular in service connections , of size 10 Smm 2 core.

S&F in replacement of downlighter round 15 W & Driver incl integrated electronic driver including taking down old unsv one complete all as specified and directed

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

Taking down service/sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and directed.

Supply and fixing LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connecting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts, 50 hz complete all as specified and directed.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP-66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site, GI bracket 32 mm dia pipe and 02 numbers clamps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.

S&F wire for circuit/ sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/ PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One RM PVC casing capping/ PVC conduit one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run)

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric powder cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core 16 sq mm. complete all as specified and directed.

Supply and laying Double wall corrugated HDPE duct pipe 50mm outer dia confirming to IS:14930 (part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.

M/S N D ENTERPRISES (BID ID -3511431)

M/S ASHOK CONSTRUCTION (BID ID -3512256)

Sikha Traders (BID ID -3514594)

M/S R P M CONSTRUCTION (BID ID -3516293)