Construction of New Stadium at Village Mahjid in Sub Division Narnaund in Distt. Hisar (Pdg. E.I Internal only). RECALL

Amount

1: - Molded case Circuit breakers: Supply and erection of molded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (C). i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

2: - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm

3: - M.S.Sheet (HSR 31.14)i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

4: - Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

5: - Supply and erection of Fittings and Accessories. (HSR 31.18)vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

: - ix (b) Bell push flush type ( without flexible wire ) in existing sheet.

: - xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick Bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

6: - Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

: - xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

: - xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

7: - Earthing (HSR 31.22)i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required.

: - ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

: - xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

8: - Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections . (HSR 31.26) iv) 10 Sq. mm 2 Core Ard. Cable.

: - xll) 25 Sq. mm 4 Core Ard. Cable .

9: - PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36) i) Fan Point b) Medium Point

: - c) Long Point

: - ii) Light Point a) Short Point

: - b) Medium Point

: - c) Long Point

: - vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long point

: - vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

: - c ) Long point

: - viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

10: - S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

: - iii) Cable size 4 sqm(7/0.85 mm)

11: - S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) vi) 8-way,TP&N (Horizontal)(8+24)

12: - S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48)

13: - Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI bracket on wall with 2 nos. 50mm x 3mm thick MS flate including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc including making necessary connection in all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.53)

14: - Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Deluxe model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55)

15: - Non Schedule Items Supply and erection of wall mounting fans 400 mm dia complete with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work.

16: - Supply and erection of 20/22 watts 2100 lumens LED light complete with all standard accessories as supplied by the manufacturer complete with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work. Make and Model: PHILIPS: Steller bright/ Bajaj/ Havell's.

17: - Supply and erection of 36 W recess mouning LED Flate panel 2'X2' deep drawn CRCA sheet steel housing duly power coated with high efficient LEDs & glare free full opal diffuser IP20 LED Box type panel 110 Lumen per Watt including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. As per approved make list of Department.

18: - S/E of 60 W LED street light fitting 110 Lumens per Watt in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. As per approved make list of Department.

19: - Supply and erection of 48” (1200 mm) ceiling fan complete with standard down rod, three blades fitted with double ball bearing but without regulator complete in all respect.

20: - Supply and erection of Industrial Heavy duty Exhaust fan 12” (300 mm) complete in all respect.