CERTAIN B/R AND E/M WORKS FOR ASV SECTION AND OTHER ASSOCIATED WORK AND ARBORICULTURE WORKS FOR ADDN/ALTN TO BUILDING NO P-842 AT AF STN GWALIOR

Amount

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, and removing excavated n exc 50m depositing where directed at a level n exc. 1.5 m above the starting point and all as specified and directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Demolition of unreinforced cement concrete /pavement quality concrete in ground floors and pavings below or above ground level by means of machanical methed including cutting by machine of existing edges/ boundary of any thikness and removing the demolished material exc.1.5 km but not exc. 5 km from site /out of defence land complete all as specified and directed.

S&F MS tubular pipes as in vertical post , rafter & purlins as in sheds/canopy cut to reqd shape , welding drilling and including bending as necessary , gusset plates, riveting , etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F mild steel bolt (machine) made 12 to 16mm dia with nexagonal of square head at one end and screwed end to be fitted washer hexagonal or square nut exceeding 5cm long complete all as specified and directed.

S&F MS Plates (plain or chequered) channels, cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 290 -W (Gde-E-165) welded/bolted to steel frame/ truss all as specified and directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as specified and directed.

S&F Pre- painted (Camouflaged pattern) galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted (Camouflaged Pattern) galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out soft/ loose soil complete all as specified and directed.

All as per item No 12 above exc 1.5 m deep and getting out soft/ loose soil complete all as specified and directed.

Returning, filling in , including spreading , levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material.exc. 50m and n exc 1.5 Km and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed..

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and as directed by Engineer-in-charge.

M&L for pavement quality control concrete using crushed stone aggregate having minimum field flexural sength of 40 Kg/Sq Cm and characteristic compressive strength 40 N/Sqmm in pavement using non circular/triangular synthetic fibre @ 0.25% by weight of cement used laid to level, gradient and camber including necessary form work and laying of polythene under and side of concrete complete all as specified and directed. Note : Non circular / trinagular fibre shall be measured and paid for seperately as supply only.

Supply only polyster non-circular /triangular fibres 12mm long with circum circle diameter 30-35 micron, designed for melting point of 240-260 degree celcius and having specific gravity of 1.34 to 1.40 complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerbs or coping, mud stops, floor, hard standing etc rounded or chamfered on edges, slightly rounded chamfered angles and throating incl necessary form work and all as specified and directed.

M & L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses incl necessary formwork etc and all as directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, and bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and all as directed.

M & L for TMT bars over 5mm dia and upto including10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking, hooking ends etc, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and all as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preperation of newly plastered surface of wall of any description and applying two coat oil bound distemper over one coat of primer over two coats of wall putty complete all as per specfied and directed.

S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S & F and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make and the dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and directed

Supply & Fixing 5mm thick toughened glass as in hinged doors, partition, automatic doors and similar work including cutting shapes and drilling holes required as specified.

S&F 4mm thick Aluminium composite panel on aluminium doors, windows and partitions in squares with rubber neoprene gasket and aluminium beading and all as specified and directed.(aluminium beadings shall be paid separately

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and all as specified and directed.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, complete all as specified and directed .

S&F 150mm long aluminium barrel tower bolts, of extruded section complete all as specified and directed .

S&F rotational moulded ploythylene water storage tank 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified of capacity complete all as specified and directed.

S&F float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe ( Min. wt. 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed.

S&F PVC connection of 15mm size with PTMT Nuts of lenhth 600mm complete all as specified and as directed

S&F galvanised steel tubing 15mm bore medium grade with all fitting and fixed complete to walls, floor and ceiling etc complete all as specified and directed

S & F Vitreous China wash basin, white, flat back, size 550x450mm excluding ditto but including brackets (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and directed.

S&F 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

S&F 75mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.

S&F PVC(SWR) floor trap/nahani trap including CP grating suitable for 75mm bore pipe complete all as specified and directed.

S&F chromium plated fancy type long body bib taps cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.

S&F 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 4mm thick HPSC pre-prime non asbestos fibre cement designer building board (E-classic ) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material. exc. 250m but n exc 500 metre and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed..

Supply and planting of carpet American grass including water spraying etc in lawn area complete all as specified and directed..

M&L approved earth/fertile soil filling in floors spread, levelled and including watering complete all as specified and directed..

Supply and planting of avenue trees of approved species as per direction incl excavation of pits of required size and depth in all types of soil and back fill approved black/fertile soil after soil treatment with chemical and fertilizer incorporating manure of approved quality in the proportion of 1:3 (One part of manure & 3 part of soil) manure 200 gm per plant and using pesticides of approved quality etc removing surplus soil to a distance n.exc. 1.5 Km and deposting where directed.

Musunda

Royal Palm

Jasmine

Ashok

Sicas Palm (Min Height 0.9 Mtr)

M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame of required module at site, for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.

(a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board.(One circuit with max four point)

All as per item No 52 above but 2.5 Sqmm size for one 16 A socket outlet on independent board (One circuit with max one point)

S&F Modular switch 1 way 6A, 1 module single pole 230 V.

S&F Modular type switch socket out let combination 2 in 1, 5 pin 6 Amps flush type 230 Volts

S&F Modular type switch socket combination 2 in 1, 6 pin 6A and 16 A combined 2 module 230 Volts complete all as specified and directed..

S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed.

Supply and fix LED luminaire 600 mm x 600 mm, 36 watts, 220 V AC with minimum 125 lumen per watt recessed type with high-efficiency PMMA diffuser soft glare-free light with motion sensors for auto switching off and on complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and as specified & directed.

Supply and fix LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing ceiling fans 1200mm sweep, BEE 5 star rated, ceiling fan with brush less direct current (BLDC motor), minimum 6.00, air dielivery minimum 210 CMM electronic remote unit for speed control and all remaining accessories suitable for 230 V, 50Hz, single phase AC supply, including necessary connection with ceiling rose with 3 Core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed.

Supply and fixing energy saving environment friendly, long life exclusive innovative die cast aluminium IP-65 flood light 70 Watt LED 6000K with high power LEDS as light source complete including suitable fixing arrangement on pole, pillar, wall with suitable fasteners, nut, bolts, clamps and making connection with three core copper conductor cable not less than 1.5 sqmm complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase suitable for MCB 2 Pole IP 43 Metal door SPN DB 8 Way double door with bus bar inluding grouting on the wall using screws and rawl plugs and making dood disturbed surfaces to match with the existing colour of wall complete all as specified.

Supply and fix 240 V, 10 KA 'B' curve miniaure circuit breaker (MCB ) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB, complete with connection testing and commissioning all as specified and as directed.

Supply and fix 240 V, 10 KA 'B' curve miniaure circuit breaker (MCB ) of single pole and neutral, current carrying capacity 40 Amp, in the MCB DB, complete with connection testing and commissioning all as specified and as directed.

M&L for concealed sub main wiring using two single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm of voltage rating up to and including 1100 Volts drawn in and including PVC concealed condiut of dia not less than 25mm with all fittings and accessories, along with one run of 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor cable (green colur) of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (for the incoming power supply to DB) (Note: Two runs of single- core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50 Mtrs below ground level) conneceed to GI strip 25x4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected of GI strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, PCC chamber using PCC (1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm greaded stone aggregate reinforced with 6mm dia round bar @75mm C/C both ways with MS handle 8mm dia, plastering 15mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl exdcavation and earth work and disposal of surplus soil complete all as specified and shown of Electrical plate No-3 of SSR part-I (2009) and connected to earth test point incl testing and marking bldg Nos and wiring test results (in white) on a black painted M.S. Plate (Size 300x300x3mm th) duley welded with angle iron of size 40x40x5mm, 60cm long fixed with the earth pit chamber by grouting complete all as specified and directed. Note :- (i) GI Strip 25x4mm and GI Pipe medium grade up to 7.5 mtr shall be deemed to be included in the rates quoted for earthing.

M/s Yashika Enterprises (BID ID -3489683)

M/S NIRMAL SINGH DHANJAL (BID ID -3488160)

m/s vikash Engineers (BID ID -3480395)

Sunil Traders (BID ID -3489221)

M/s. Ravi and brothers (BID ID -3483606)