REPAIR/MAINT OF INTERNAL ROADS INCLUDING KERB STONE, INTERLOCKING PATH, DRAIN COVERS AND ROAD FURNITURE AT CERTAIN PLACES UNDER THE AOR OF AGE B/R-I UNDER GE (EAST) AGRA

M&L for preparing black-top surfaces by brushing with wire brushes to remove caked mud, sweeping with brooms, and cleaning the surface with air blower/power compressor through air jet to remove all loose dirt, dust and other foreign matter, complete all as specified and directed

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, exceeding 50 mm and not exceeding 100 mm deep complete all as specified and directed

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over prepared black top surfaces by mechanical sprayer operated on hot pressure mechanism complete all as specified and as directed

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm over prepared WBM surfaces by mechanical sprayer operated on hot pressure mechanism complete all as specified and as directed

M&L for providing and laying 75 mm thick water-bound macadam (compacted thickness) in one layer, using stone aggregates of granite/trap/basalt, Grading 2 (63 to 40mm size) or Grading 3 (50 mm to 20 mm size), blinded with hard-stone screenings of Grading ‘A’, including spreading, watering, rolling with 8–12 tonne power road roller, filling and correcting hollows to form a true surface, and consolidating to the required gradient and camber, complete all as specified and directed.

M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removed caked mud etc sweeping with brooms and finally cleaning the surface with air compressor through air jet to remove loose dirt etc complete all as specified and directed

M&L for providing, laying, spreading premix bituminous macadam (Design mix) (consolidated thickness 75 mm or less) with 4% binder content using paving bitumen VG-30 grade by weight of total mix laid with self-propelled mechanical paver and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller and vibromax roller complete all as specified and directed. Note :- (i) Premix Bituminous macadam shall be obtained from hot mix plant and spreading shall be done with mechanical paver and asphaltic dense concrete work shall be done within 48 hours after completion of rolling and consolidation of bituminous macadam. (ii) The contractor shall quote the rate based on the binder content specified above. If the actual binder content used is found to be less than the specified binder content, the contract rate shall be reduced proportionately for the shortfall in binder content. However, no extra payment or price adjustment shall be admissible if the actual binder content exceeds the specified binder content. (iii) Job mix formula (design mix) of premix bituminous macadam shall be approved by GE.

M&L for providing, laying, spreading bituminous premix Semi-Dense Asphaltic Concrete (SDAC) (design mix), 30 mm consolidated thickness, with 5.5% binder content by weight of the total mix, using paving bitumen VG-30, laid with self-propelled mechanical paver, and rolled and compacted with 8 to 10 tonne capacity power road roller to the required camber and gradient, complete all as specified and directed. Note :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (ii) The contractor shall quote the rate based on the binder content specified above. If the actual binder content used is found to be less than the specified binder content, the contract rate shall be reduced proportionately for the shortfall in binder content. However, no extra payment or price adjustment shall be admissible if the actual binder content exceeds the specified binder content. (iii) Job mix formula (Design mix) of SDAC shall be approved by GE.

M&L for preparing road surfaces and applying thermoplastic reflective road marking, 2.5 mm minimum thickness in a single coat, as centre line, edge line or other road markings of 100 mm/150 mm width, using hot-applied thermoplastic reflective paint of approved make, in white or yellow colour, applied by self-propelled thermoplastic road marking machine, including premixing and application of all constituents such as binder, titanium dioxide, glass beads, calcium carbonate, fillers and additives, with glass beads conforming to BS 6088 and MoRTH Specifications, including surface preparation, application and simultaneous spraying of glass beads, complete in accordance with the manufacturer's instructions, complete all as specified and directed

S&F in repair solar cat-eye, with aluminium alloy housing, IP65 waterproof design, size 125 mm × 125 mm × 25 mm, with 65 mm shank, comprising high-efficiency monocrystalline solar panel rated 2.4 V/0.3 W, one Ni-Cd rechargeable battery rated 1.2 V/1600 mAh, and super-bright LED having luminous intensity of 10,000–18,000 mcd, installation as per manufacturer's instructions, complete all as specified and directed.