Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.4 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹39.9 L+₹10.6 L (36.0%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | Rejected-Technical 32 FATEH ENCLAVE OFFICERS ENCLAVE PHASE II PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | - | Rejected-Technical NO REMARKS IN WLR QE END JUN 2022 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIMESH TRIPATHI
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
CERTAIN REPAIRS TO OFFICERS MD ACCN INCLUDING ROOF REPAIRS AND EFFLORESCENCE TREATMENT AT OLD CANTT AT PATIALA MIL STN
2022_MES_554695_1
GE(N)/PAT-63/2022-23
Open Tender
Civil Works
Lump-sum
210 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹70,000
Yes
6 Dec 2022
27 Sept 2022
27 Oct 2022
27 Sept 2022
25 Oct 2022
11 Oct 2022
Amount
Schedule 'A'Part -I (BUILDING SCHEDULE)
Total amount of Sch 'A' Part I (BUILDING SCHEDULE)
Schedule 'A' Part - II (Misc B/R & E/M Schedule) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
M&L machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50 % red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 grade and including filling of interstices with fine sand over including 25mm thick layer of sand cusion complete all as specified and directed.
Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer including acrylick thick wall care putty 1.5 to 2.5mm thick putty complete all as specified and directed.
Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer acrylick thick wall care putty 1.5 to 2.5mm thick putty complete all as specified and directed.
M&L for preparation of old surfaces of walls and applying 01 coats of interior emulsion paint (light shade) @ 5 sq.m/litre/1 coats by using roller to old painted wall surfaces and including filling the holes of nails, curtain rod brackets etc to be filled with putty by using following brands of emulsion and primer complete all as specified and directed.
M&L for preparation of old surfaces of ceilings and applying 01 coats of interior emulsion paint (white shade) @ 5 sq.m/litre/1 coats to old painted surfaces of ceiling by using following brands of emulsion and primer complete all as specified and directed.
S&F stainless steel tubing of 25 mm bore mild steel chromium plated 1.6 mm wall thickness as in curtain rod complete incl S & F necessary nos of brackets, stops and fancy type tops at rod ends etc in repairs all as specified & directed.
S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 550x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed.
S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified and directed.
S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.
S&F health faucet (ABS Body) with 1.20metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with ist class wooden beading french polished, etc.complete fixed in position all as specified and directed.
S&F soap dish,stainless steel of suitable size to accommodate soap complete all as specified and directed.
S&F PVC bathroom cabinet mirror of size 500 x 400mm complete including necessary screws for fixing in position complete all as specified and directed.
S&F Bathing mixer fancy type, chromium plated 15mm bore, non telephonic and including connected accessories, complete all as apecified and directed.
S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified and directed.
S&F Bib taps, CP long nose, fancy type long with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified and directed.
S&F Mixer pillar cock for wash hand basin, fancy type, chromium plated 15mm bore, fixed as in repair complete all as specified and directed.
S&F vitreous china premium/1st quality wash basin (under counter), off white, size 580x430 mm including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge. Note : The items for counter will be measured and paid seperately.
S&F vitreous china premium/1st quality wash down water closet single piece EWC S/P trap white/ivory/off white including connection to drain (or out going pipe), antisyphonagee pipe,etc.,and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm complete and taking down existing of any description/size complete in all respect all as specified and directed.
S&F stainless steel/ aluminium/ brass hardware fittings for toughned glass doors/ partition like locking arragements, core stainless steel roller track sliding system, glass door hinges, glass point fittings, glazing profile, SS shower glass door knob, panel side panel connector, glass holder system, wall to glass hinge 90 degree offset hinge, etc complete all as specified and directed.
S&F towel rack CP 60 cm long with lower hanger / hook fixed in position complete all as specified and directed.
S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified and directed.
S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified and directed.
S&F stainless steel sink with drainage board, AISI 304 quality grade, 0.80 mm minimum thickness', glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete in all respect all as specified and directed.
S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and directed.
Disconnecting existing tanks of any size and type, setting aside (or lowering ir required) for cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and refixing tank in same position incl fixing of necessary fittings which get damaged or broken during disconnecting of tank and writing date of celaning with synthetic enamel paint complete all as specified and directed.
S&F stainless steel grating 150 mm dia size round shaped for floor trap fixed in position complete all as specified and directed.
S&F Stainless steel plate rack made out of 0.80 mm thick stainless steel sheet of size 900x750x250mm complete all as specified and directed.
S&F in repairs glass shelf of length not less than 550mm long with stainless steel railing fixed to walls all as specified and directed.
S&F in repairs 3 tier corner acrylic glass shelf of radius not less than 30cm of lower rack with glass thickness 5.5mm with stainless steel railing fixed to walls all as specified and directed.
S&F SS towel ring complete all as specified and directed.
S&F SS tumbler holder complete all as specified and directed.
M&L for factory made rubber moulded pre-cast cement concrete type B1 1:2:4 (20mm graded agg) of size 300 x 300 x 100mm and fixing in CM 1:4 in kerb sone use with plain fair faces, including chamfers, weatherings, throating etc and setting in mortar complete with joints to match including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n.exc 50 mtrs complete all as specified and as directed.
M&L for single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors/skirting etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.
M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. Note : Dado should be flushed with the wall plastering.
M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.
M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.
Providing and laying premium (Ist) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6%, flexural strength reater than 22N/mm2, scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x 300 x7 to 8 mm thick in floors etc, in any shade and design/ pattern of light & dark tiles etc set & jointed in neat cement slurry & incl and over 20mm thick screed in cement mortar (1:4) pointed in matching coloured polymer cement based grout to match complete all as specified and directed.
M&L Baroda Green Marble, machine cut as in shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16mm thick including bull-nose the exposed sides/ lengths, set and jointed in cement slurry over & including screed of 15mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on unpoished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified and as directed. Note: Single piece should be used in steps/cills/jambs/shelves.
S&F 100 size PVC butt hinges all as specified and as directed.
S&F 125 mm PVC handles all as specified and directed.
S&F 200 mm long PVC tower bolt all as specified and directed.
Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters inlcuding preparation of wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and including supply and fixing following items : (a) Mild Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf
35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm), inlcuding preparation of wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer and the supply and fixing following items: (a) Mild Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf
S&F aluminium window (casement & sliding) and ventilator/door shutters with 50 micron powder coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc and aluminium beeds in inner shutters complete fixed in all respect as specified & directed.
S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed.
S&F 5mm thick glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed.
S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed.
S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.
S&F powder coated aluiminium tower bolt 200mm long complete all as specified and directed.
S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.
S&F powder coated aluminium handles 150mm complete all as specified and directed.
S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed.
S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDM gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.
Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified and directed.
M&L for rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thcik with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor over and including 20mm thick screed bed and complete all as specified and directed.
M & L for grinding and polishing of mosaic or kota stone flooring & skirting, complete all as specified and directed.
S&F heavy duty stainless steel grab handles for bathroom length not less than 300mm complete all as specified and directed.
S&F PVC Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed.
Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified complete all as specified and directed.
S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.
S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.
S&F 12 mm thick LEAD FREE PVC Celuka ply min density 600 Kg/cum fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.
S&F 5 mm thick with min density 600Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s specifications complete all as specified and directed.
S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.
S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.
S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete all as specified and directed.
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete all as specified and directed.
S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.
S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.
S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete all as specified and directed.
S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed.
S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified and directed.
S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed.
S&F only Bright /matt finished Stainless Steel handles of size 150mm oval type, heavy weight of approved quality & make with necessary screws etc all complete all as directed and specified.
Scraping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed.
Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.
S&F factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mm x 22mm, machine pressed, as on roof surface, confirming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately), set jointed and pointed with grey cement slurry complete all as specified and directed.
S&F PVC waste pipe for sinks, wash basins, urinal etc of length 450 to 900 mm complete all as specified and directed.
Removing existing plaster over the affected bricks to be removed using mechanical means. The affected bricks to be completely exposed complete all as specified and directed.
Apparent visible efflorescence to be first cleaned using hard wire brush and all cyrstal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 parts water) and apply it to the efflorescence affected area using a nylon brush. Allow the vinegar/ water solution to sit on the surface of the affected area for 15 minutes, but do not allow the solution to dry. Rinse the area with clean water, using low pressure jet. Two cycles of cleaning using vinegar water solution to be repeated complete all as specified and directed.
The joints of bricks so cleaned shall be pointed using cement putty made a site using Sika Latex/SBR polymer diluted at ratio of 1:4 with water. The solution so made shall be used to be mixed with cement to make a putty consistency paste. The cement putty shall be then worked out in the joints which are clean and in SSD condition.
The bricks so pointed shall be cleaned of all dust or deposit using brush. A undiluted single component acrylic polymer-Sika Raintite, to be used to prime the brick surface. The primer while being tacky the first coat of water proofing coating is done, second coat is applied after a time interval of 4-6 hours after the first coat has dried. The water proofing coating shall be two component polymer modified cementitious coating-Sika top seal-107, having a thickness of 1.5mm in two coats. The material to be factory batched and ready to use. The two components shall be mixed using low speed drill having a RPM 350-450 and fitted with a paddle. The mixing to be done for 3-4 mintues to give a brush able consistency mix. The coating shall be done using brush 100-150mm wide brush. It is to be take care that material while being used is agitated every 3-5 mintues to avoid powder part getting settled. The water proofing coating shall have below properties Tensile Strength - 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370) Bond Strength 2.0 N/mm2 at + 27o C (failure in substate). After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper mechanical key is provided for subsequent plaster.
M&L for plastering 15mm thick over the treated surface shall be done with 1:4 cement sand plaster added with acrylic polymer-Sika Plastocrete Plus, @ 3% by weight of cement.
S&F palmate hold-open door closer aluminium extruded body thermal check range- 10 c to 50 c leak proof, two speed adjustment, smooth function for door’s weight capacity upto 120 kg complete all as specified and as directed.
M&L for applying 2 coats of polymer-modified flexible cementitious waterproofing membrane coating ready mix (2 parts – Powder Part and liquid part) on new / old concrete surface at 1.10 kg./Sqm/coat for 0.8 mm thick of each coat (or as per manufacturer instruction), complete all as specified below
(a) Allow new / old concrete and masonry substrate to fully cure prior application. (b) All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might effect adhesion. Spalled Concrete must be sound before applied. (c) Substrate should be reach a "Saturated Surface Dry" (SSD) condition (damp, without standing water) (d) Using Portland mechanical mixer, slowly add Powder part to Liquid part in a clean container until a smooth and homogenous slurry mixture is achieved and allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application. Mixing material must be use within recommend pot life. (e) Polymer-modified flexible cementitious waterproofing membrane coating ready mix slurry can be applied by brush or trowel. DO NOT dilute with water. Recommended coverage rate is approximately 1.1 kg./m2/coat for 0.8 mm. thick of wet film thick (minimum 2 coat.) (f) Allow the slurry to cure for at least 1 hour before applying a second coat.
M&L for Screed bed or bedding layer of mortar 20 mm thick in Cm 1:4 for laying floor/roof finishes complete all as specified and as directed.
M/s Rakesh Singla
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .