Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | ₹8.7 L Quoted ₹9.0 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹9.6 L+₹69,732 (7.79%)Rejected-Finance | ₹9.6 L+₹69,732 (7.79%) | L2 | Rejected-Finance BEING NOT LOWEST |
| 3 | L3₹9.9 L+₹92,853.40 (10.4%)Rejected-Finance | ₹9.9 L+₹92,853.40 (10.4%) | L3 | Rejected-Finance BEING NOT LOWEST |
| 4 | L4₹9.9 L+₹96,883.50 (10.8%)Rejected-Finance 00 VILL RATI KA NAGLA SIKANDRA RAO ROAD INDUSTRIAL HATHRAS UTTAR PRADESH 204212 | HATHRAS | UTTAR PRADESH | 204212 | ₹9.9 L+₹96,883.50 (10.8%) | L4 | Rejected-Finance BEING NOT LOWEST |
| 5 | L5₹10.0 L+₹1.0 L (11.6%)Rejected-Finance | ₹10.0 L+₹1.0 L (11.6%) | L5 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | M/S PRAGATEE ENTERPRISES L5 | HARSH ASSOCIETES L1 | Technological Associates L2 | HIMANSHU TRADERS L6 | M/S Garg Sons L3 | Airways Enterprises L8 | Krishna Enterprises L7 | M/S VIJAY SINGH L4 | RK Enterprises L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Attending complaints like leakge of taps, angle valve, stop cocks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratings, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the existing/services to the satisfaction of Engineer-in-Charge.
Note :- (i) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor.
(ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item concerned.
(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or auth rep in writing.
(iv) The area/Location of Job will be all MD and OTM accn in AOR of AGE (I) | 607 | Each Complaint | 50 ₹30,350 Lowest | 80 ₹48,560 | 82 ₹49,774 | 125 ₹75,875 | 120 ₹72,840 | 116 ₹70,412 | 130 ₹78,910 | 129 ₹78,303 | 115 ₹69,805 |
| 2.00 | Dismantling / taking down long body bib cock / stop cock/Pillar Cock/Angle cock etc of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers and major repair such as jumper brass, spindle/ caps etc or refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern complete all as specified and directed.
Note - Any major parts such as jumpers brass/ spindles/ caps any type etc to be measured as supply only in conjuction with this item and paid for accordingly. | 60 | Each | 75 ₹4,500 | 150 ₹9,000 | 160 ₹9,600 | 70 ₹4,200 | 65 ₹3,900 | 62 ₹3,720 | 75 ₹4,500 | 76 ₹4,560 | 60 ₹3,600 Lowest |
| 3.00 | Supply only GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed | 25 | Rm | 235 ₹5,875 | 200 ₹5,000 | 210 ₹5,250 | 155 ₹3,875 | 150 ₹3,750 | 148 ₹3,700 | 160 ₹4,000 | 148 ₹3,700 | 145 ₹3,625 Lowest |
| 4.00 | Supply only GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed. | 10 | Rm | 300 ₹3,000 | 250 ₹2,500 | 260 ₹2,600 | 179 ₹1,790 | 178 ₹1,780 | 175 ₹1,750 | 180 ₹1,800 | 175 ₹1,750 | 170 ₹1,700 Lowest |
| 5.00 | S&F in repair GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or ceilings compete all as specified and directed. | 20 | Rm | 320 ₹6,400 | 200 ₹4,000 | 205 ₹4,100 | 185 ₹3,700 | 180 ₹3,600 | 190 ₹3,800 | 190 ₹3,800 | 176 ₹3,520 | 175 ₹3,500 Lowest |
| 6.00 | S&F in repair GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or ceilings compete all as specified and directed. | 10 | Rm | 390 ₹3,900 | 250 ₹2,500 | 260 ₹2,600 | 230 ₹2,300 | 220 ₹2,200 | 230 ₹2,300 | 240 ₹2,400 | 215 ₹2,150 | 210 ₹2,100 Lowest |
| 7.00 | Supply only 15mm CP pillar cock compete all as specified and directed.
Make : Cera or equivalent as specified in Appx 'B' List of makes | 8 | Each | 680 ₹5,440 Lowest | 1,100 ₹8,800 | 1,050 ₹8,400 | 1,550 ₹12,400 | 1,500 ₹12,000 | 1,425 ₹11,400 | 1,600 ₹12,800 | 1,450 ₹11,600 | 1,400 ₹11,200 |
| 8.00 | Supply only 15mm PTMT pillar cock compete all as specified and directed.
Make : Prayag with Cat Part No 7302 | 15 | Each | 350 ₹5,250 Lowest | 400 ₹6,000 | 410 ₹6,150 | 380 ₹5,700 | 370 ₹5,550 | 370 ₹5,550 | 390 ₹5,850 | 365 ₹5,475 | 360 ₹5,400 |
| 9.00 | Supply only 15mm CP bib cock with nozzle and flange compete all as specified and directed.
Make: Cera or equivalent as specified in Appx 'B' List of makes | 8 | Each | 700 ₹5,600 Lowest | 1,200 ₹9,600 | 1,210 ₹9,680 | 1,350 ₹10,800 | 1,300 ₹10,400 | 1,300 ₹10,400 | 1,360 ₹10,880 | 1,250 ₹10,000 | 1,200 ₹9,600 |
| 10.00 | Supply only 15mm CP bib cock with flange compete all as specified and directed.
Make: Cera or equivalent as specified in Appx 'B' List of makes | 20 | Each | 800 ₹16,000 Lowest | 1,200 ₹24,000 | 1,220 ₹24,400 | 1,350 ₹27,000 | 1,300 ₹26,000 | 1,195 ₹23,900 | 1,360 ₹27,200 | 1,250 ₹25,000 | 1,200 ₹24,000 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
5 Jul 2025, 6:00 pmClosed
AGE (I) AF Manauri
AGE (I) AF MANAURI PRAYAGRAJ 212212
REP MAINT DAY TO DAY SERVICES AND REPAIRS TO INTERNAL PLUMBING SANITARY FITTINGS JOINERY FLOORING MASONRY FINISHES KITCHEN CABINETS CUP BOARDS TO BLDGS WALL AND ALLIED WORKS AT OFFICERS ENCLAVE AREA 24 ED AF STN
2025_MES_714676_1
9242/E8
Open Tender
Civil Works
Item Rate
180 days
Manauri
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
AGE (I) AF MANAURI
₹18,000
Yes
30 Sept 2025
14 Jun 2025
7 Jul 2025
14 Jun 2025
5 Jul 2025
28 Jun 2025
Amount
Attending complaints like leakge of taps, angle valve, stop cocks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratings, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the existing/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item concerned. (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or auth rep in writing. (iv) The area/Location of Job will be all MD and OTM accn in AOR of AGE (I)
Dismantling / taking down long body bib cock / stop cock/Pillar Cock/Angle cock etc of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers and major repair such as jumper brass, spindle/ caps etc or refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern complete all as specified and directed. Note - Any major parts such as jumpers brass/ spindles/ caps any type etc to be measured as supply only in conjuction with this item and paid for accordingly.
Supply only GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed
Supply only GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings compete all as specified and directed.
S&F in repair GI water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or ceilings compete all as specified and directed.
S&F in repair GI water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or ceilings compete all as specified and directed.
Supply only 15mm CP pillar cock compete all as specified and directed. Make : Cera or equivalent as specified in Appx 'B' List of makes
Supply only 15mm PTMT pillar cock compete all as specified and directed. Make : Prayag with Cat Part No 7302
Supply only 15mm CP bib cock with nozzle and flange compete all as specified and directed. Make: Cera or equivalent as specified in Appx 'B' List of makes
Supply only 15mm CP bib cock with flange compete all as specified and directed. Make: Cera or equivalent as specified in Appx 'B' List of makes
Supply only 15mm PTMT bib cock long body with flange compete all as specified and directed. Make : Cera or equivalent as specified in Appx 'B' List of makes
Supply only 15mm PTMT bib cock short body with flange compete all as specified and directed. Make : Cera equivalent as specified in Appx 'B' List of makes
Supply only 15mm CP angle cock with flange compete all as specified and directed. Make : Cera equivalent as specified in Appx 'B' List of makes
Supply only 15mm PTMT angle cock with flange compete all as specified and directed. Make :Cera equivalent as specified in Appx 'B' List of makes
Supply only 15mm CP 2 way angle cock with flange compete all as specified and directed. Make: Cera equivalent as specified in Appx 'B' List of makes
Supply only 15mm CP 2 way bib cock with flange compete all as specified and directed. Make: Cera equivalent as specified in Appx 'B' List of makes
Supply only concelated stop cock 15mm with flange compete all as specified and directed. Make: Cera equivalent as specified in Appx 'B' List of makes
Supply only concelated stop cock 20mm with flange compete all as specified and directed. Make cera or equivalent
Supply only CP sink bib cock 15mm with flange complete all as specified & directed. Make : Cera equivalent as specified in Appx 'B' List of makes
Supply only overhead rain shower SS 150mm dia (6") compete all as specified and directed. Make : Cera with Cat Part No F7010211SS
Supply only 15mm dia overhead shower arm SS 200mm (8") with flange compete all as specified and directed. Make: Cera with Cat Part No F7040102
Supply only 15mm health faucet ABS body with 1.25 Mtr SS braided connection pipe compete all as specified and directed. Make : Cera or equivalent as specified in Appx 'B' List of makes
Supply only towel rail 600mm (24") compete all as specified and directed. Make : Cera with Cat Part No F5007103
Supply only soap dish compete all as specified and directed. Make : Cera with Cat Part No F5007106
Supply only paper holder complete all as specified & directed. Make : Cera with Cat Part No F5007109
Supply only paper holder with flap guard compete all as specified and directed. Make : Cera with Cat Part No F5007110
Supply only coat hook of Six complete all as specified & directed. Make : Cera with Cat Part No F5003113
Supply only 20mm ball brass valves, high pressure with polythelne float and fly nut in 20mm bore complete all as specified and directed.
Supply only corner glass shelf (large) 300 x 300mm (12" x 12") compete all as specified and directed. Make : Cera with Cat Part No F5005103
Dismantling water tanks of 500 Ltrs complete all as specified and directed.
S & F Rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical & triple layer with closed top) hoisted and fixed in position complete all as specified & directed.
Dismantling existing 500 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing in position and including writing date of cleaning by stencils using synthetic enamel paint on tank complete all as specified & directed.
Dismantling existing 1000 Ltrs water tanks, setting aside, cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and re-fixing and including writing date of cleaning by stencils using synthetic enamel paint on tank in position complete all as specified & directed.
Supply only cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete all as specified & directed.
Supply only waste coupling (full thread) 32mm.complete all as specified and directed.
Supply only PVC waste coupling of 40 mm size for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified & directed.
S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests complete including provision of lime concrete bedding and connection to trap, & to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor complete all as specified & directed.
S & F in repairs vitreous china wash down water closed pan (pedesstal pattern/EWC), white with fixing bolts, trap, including connection to drain (or outgoing pipe) & to flushing pipe, antisyphonage pipe, etc, seat and cover complete all as specified & directed.
Supply only 32/40 mm in size flush kit/valve for flushing cistern complete all as specified and directed.
Supply only 32/40 mm in size brass flush kit/valve piston for flushing cistern complete all as specified and directed.
S & F in repairs white 10 Ltrs PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipe complete all as specified & directed.
S & F in repairs Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified & directed.
S & F in repairs vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified & directed.
Supply only PVC waste pipe for sink/basin of size 32mm/40mm complete all as specified & directed.
Supply only PVC waste pipe for urinal complete all as specified & directed.
S & F in repairs SS plate rack of size 787 x 762 x 254mm of 0.60mm thickness fixed with necessary fixing arrrangements including neessary fasteners, screws etc. complete all as specified & directed. Make : Bluestar with Cat Pat No SSKPR-314
Supply only PVC connection pipe 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
Supply only PVC connection pipe 15mm size with PTMT nuts of length 750mm complete all as specified & directed.
S&F in replacement 15mm chromium plated single liver basin mixer with 450mm braided connection pipe (without popup) with bend pipe & fittings complete all as specified & directed.
S&F in replacement 15mm chromium plated single liver sink mixer with 450mm braided connection pipe (without popup) with bend pipe & fittings complete all as specified & directed.
S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to pedestal pan, including all joints complete all as specified & directed.
S & F in repairs flush pipes of polythylene of low or high density or PVC, 32mm dia for low level cistern to squatt pattern closet including all joints and making good to the floor complete all as specified & directed.
Supply only grating doom 100mm dia of PTMT (Min weight 25 gms) complete all as specified & directed.
Supply only grating doom with hole 100mm dia of PTMT (Min weight 25 gms) complete all as specified & directed.
S & F in repairs 110 mm PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall and floors.
S & F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints fixed to walls and floors complete all as specified & directed.
S/F 110mm PVC (SWR) bends any radius complete all as specified & directed.
S & F 75mm thick PVC (SWR) bends any radius complete all as specified & directed.
S&F in replacement accessories kit suitable for concealed body wall mounted diverter complete all as specified & directed.
S & F in repairs 110mm PVC (SWR) 'P' trap complete all as specified & directed.
S & F in repairs 110mm PVC (SWR) 'S' trap complete all as specified & directed.
S&F in repair wall mounted stainless steel automatic urinal flush sensor set dual power supply mode chrome plated sensor for urinal complete all as specified and directed.
Supply only 15-20mm(out side dia-20 mm) GI reducer complete all as specified & directed.
Supply only 20 mm bore GI Union complete all as specified & directed.
Supply only 20 mm bore GI Elbow complete all as specified & directed.
Supply only 20 mm bore GI socket complete all as specified & directed.
Supply only 15 mm bore GI Tee complete all as specified & directed.
Supply only 15 mm bore GI Union complete all as specified & directed.
Supply only 15 mm bore GI Elbow complete all as specified & directed.
Supply only 15 mm bore GI socket complete all as specified & directed.
Supply only 15 mm bore 150 mm long Nipple complete all as specified & directed.
Supply only 15 mmbore 100 mm long Nipple complete all as specified & directed.
Supply only 15 mm GI nipple fully threaded with two numbers check nuts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe of following sizes complete all as specified & directed.
Supply only 20 mm GI nipple fully threaded with two numbers check nuts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe of following sizes complete all as specified & directed.
Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge and including taking down and removing of joinery fittings rtc comlete all as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor 's supervisor (auth rep). (iii) The area/Location of Job will be all MD and OTM accn in AOR of AGE (I)
Hacking out old broken glass from metal frame including punching or drilling out old glazing complete all as specified & directed.
M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane complete all as specified & directed.
S & F solar control film 25 micron reflective type sticked to glass planes as per instructions of manufacturers including removal of existing film complete all as specified and directed.
Supply only 18/19mm thick commercial plywood interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens as required including taking down complete all as specified & directed.
Supply only PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw complete all as specified & directed.
Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ccomplete all as specified & directed.
Supply only 2nd Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete all as specified & directed.
Supply only 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.
Supply only 250 mm long aluminium anoised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified & directed.
Supply only 100 mm long Stainless steel hinges complete all as specified & directed.
Supply only 100 mm size stainless steel handle complete all as specified & directed.
Supply only 150 mm size stainless steel handle, fabricated type complete all as specified & directed.
Supply only 100 mm size aluminium anodised handle complete all as specified & directed.
Supply only 150 mm size aluminium anodised handle, fabricated type complete all as specified & directed.
Supply only 75mm anodised aluminium handles complete all as specified and directed
Supply only 100 mm long stainless steel barrel tower bolt complete all as specified & directed.
Supply only 150 mm long stainless steel barrel tower bolts complete all as specified & directed.
Supply only 100 mm long aluminium anodised barrel tower bolt complete all as specified & directed.
Supply only 150 mm long aluminium anodised barrel tower bolts complete all as specified & directed.
Supply only 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified & directed.
Supply only 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete all as specified & directed.
Supply only floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size complete all as specified & directed.
S&F in repair aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified & directed.
Supply only 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
Supply only Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified.
S&F in repair stainless steel curtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified & directed.
Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor (auth rep). (iv) The area/Location of Job will be all MD and OTM accn in AOR of AGE (I)
Supply only 250 mm size mild steel peg stay fixed to steel window (as per sample) complete all as specified & directed.
Supply only mild steel handle for steel window etc complete all as specified and directed.
Spot welding in repair for fixing hinges/handle/ bolts/helical door spring etc complete all as specified & directed.
Demolition of brick work built in CM complete all as specified and directed.
M&L for brick work with sub class 'B" bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified & directed.
M&L brick work with with sub class 'B" bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified & directed.
M&L Except brick work with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified & directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.
M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and fair complete all as specified & directed.
M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and fair complete all as specified & directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of OBD over priming surfaces complete all as specified & directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified & directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified & directed.
M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified & directed.
M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified & directed.
M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick/300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified & directed.
Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified & directed.
M&L brick work with sub class "B" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified & directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified & directed.
M&L for providing 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and smooth with using extra cement etc complete all as specified & directed.
M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified & directed.
M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified & directed.
Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each complete all as specified & directed.
Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified & directed.
Taking down chowkhat with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed.
Taking down Shutters of any description exc 1 sqm but n. exc. 4.00 sqm each complete all as specified & directed.
Dismantling MS work of any description not otherwise provided for complete all as specified & directed.
S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work complete all as specified & directed.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 complete all as specified & directed.
S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed.
S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed.
M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified & directed.
S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified
S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat complete all as specified & directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed
S&F 75 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed
S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.
S&F Aluminum Barrel tower bolt 125mm complete all as specified and directed.
S&F aluminium anodised 250mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified & directed.
M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully.Refabricating and refixing in frame position using all old material including replacement of required neoprene packing,cleats,screws with necessary Aluminium angle cleat screws etc. complete all as specified & directed.
S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, groverning pivot made of brass, other parts made of mild steel heavy duty made and fixed complete all as specified & directed.
S& F in repair stainless steel kitchen cabinet drawer rolling channel eye moove soft close ball bearing teliscopic channel of size 500mmx35mm in any colour complete all as specified & directed.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri
Technological Associates (BID ID -3340687)
M/S Garg Sons (BID ID -3343708)
M/S VIJAY SINGH (BID ID -3346817)
M/S PRAGATEE ENTERPRISES (BID ID -3340259)
HIMANSHU TRADERS (BID ID -3342713)
Krishna Enterprises (BID ID -3346579)
Airways Enterprises (BID ID -3344863)
RK Enterprises (BID ID -3348322)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .