NIT No.49/EEE/KBZ/MCD/2025-26 Item No. 02

Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 4 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 6 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 10 sq. mm ISI marked, FRLS PVC insulated,

Supply of 16 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of S.P. 5/6 amps, one way modular switch, ISI marked

Supply of S.P. 15/16 amps, one way modular switch, ISI marked

Supply of 3 pin 5/6 amps modular socket outlet, ISI marked

Supply of 6 pin 15/16 amps modular socket outlet, ISI marked

Supply of Modular base & cover plate for 3 module

Supply of Modular base & cover plate for 4 module

Supply of Modular base & cover plate for 6 module

Supply of Modular base & cover plate for 8 module

Supply of Modular base & cover plate for 12 module

Supply of S.P. 5/6 amps, one way switch,Piano type ISI marked

Supply of S.P. 15/16 amps, one way switch,Piano type ISI marked

Supply of 3 pin 5/6 amps socket outlet,Piano type ISI marked

Supply of 6 pin 15/16 amps socket outlet,Piano type ISI marked

Supply of 3 pole MCCB, 100A, 16KA

Supply of3 pole MCCB, 125A, 16 KA

Supply of4 pole MCCB, 100A, 30KA

Supply of 4 pole MCCB,125 A, 36KA

Supply of4 pole MCCB, 200A, 36KA

Supply of4 pole MCCB, 250A, 36KA

Supply of4 pole MCCB, 400A, 50KA

Supply of 10 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

Supply of 16 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

Supply of 25 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

Supply of 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

Supply of 10 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

Supply of 16 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

Supply of 25 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

Supply of 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity

Supply of 40 amps., 2 pole isolator

Supply of 63 amps., 2 pole isolator

Supply of 20 amps. SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure

Supply of Aluminium Lug for 6 Sqmm Cable

Supply of Aluminium Lug for 10 Sqmm Cable

Supply of Aluminium Lug for 16 Sqmm Cable

Supply of Aluminium Lug for 25 Sqmm Cable

Supply of Aluminium Lug for 35Sqmm Cable

Supply of Aluminium Lug for 50 Sqmm Cable

Supply of Aluminium Lug for 150 Sqmm Cable

LED Batten light (System lumen efficacy >135 lm/Watt) Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)18- 22 watt

Brush Less Direct Current (BLDC) Motor Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Replacement of fan condenser 2.5 mfd as required.

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*35 sqmm

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3.5C*50 sqmm