Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC 487 A 1 GOPAL MISHRA ROAD BEHALA KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | ₹1.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.0 L+₹10,133 (5.25%)Rejected-Finance 159 KAILASH GHOSHI ROAD KOLKATA WEST BENGAL 700008 | KOLKATA | KOLKATA | WEST BENGAL | 700008 | ₹2.0 L+₹10,133 (5.25%) | L2 | Rejected-Finance L2 |
| 3 | L3₹2.1 L+₹11,998 (6.21%)Rejected-Finance 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹2.1 L+₹11,998 (6.21%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | STAR ENTERPRISE L1 | MIK ENTERPRISES L3 | POWER INDIA L2 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling, repairing, rewinding & overhauling of the 415V, 50 Hz, 3-ph, 27 KW Submersible Pump-motor set (KSB make) including replacement of damaged components like casing wearing ring, impeller nut, bearing lock nut, mechanical seal (SIC VS SIC), bush for seal housing, rotor key and rotor lock nut, impeller key etc followed by testing and commissioning of the pump-motor set with trial run for a period of 03 days as per direction of EIC. | 1 | Job | 1,83,800 ₹1,83,800 Lowest | 1,95,214 ₹1,95,214 | 1,93,450 ₹1,93,450 |
| 2.00 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. 4 CORE 16 SQ MM | 20 | Mtr | 348 ₹6,960 Lowest | 370 ₹7,400 | 366 ₹7,320 |
| 3.00 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core 16 sq mm. | 2 | Nos | 155 ₹310 Lowest | 165 ₹330 | 163 ₹326 |
| 4.00 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 16 sqmm cable. | 2 | Set | 111 ₹222 Lowest | 118 ₹236 | 117 ₹234 |
| 5.00 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | 5 | Sq M | 357 ₹1,785 Lowest | 379 ₹1,895 | 376 ₹1,880 |
Tender Value
Refer Docs
EMD Value
₹4,000
Closing Date
10 Mar 2026, 1:00 pmClosed
Executive Engineer, GAP-II, EM, KMDA
OFFICE OF THE EXECUTIVE ENGINEER (E/M)/GAP-II 1/425, Gariahat Road(s), Kol-68
Repairing, servicing, overhauling and testing and Commissioning of 415V, 50 hz, 27 KW Submersible Pump Motor Set (KSB Make Model No. KRTK 150-315/294 UG S) for OHR filling at Padmapukur WTP-I (10 MGD) under HMC.
2026_KMDA_1010972_1
EE(E/M)/GAP-II/KMDA /2W-10/2025-26/35 Date -18.02.2026
Open Tender
Electrical Work/ Equipment
Item Rate
10 days
Padmapukur
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,000
Office of the Executive Engineer, GAP-II, EM, KMDA
31 Aug 2026
26 Feb 2026
12 Mar 2026
26 Feb 2026
10 Mar 2026
26 Feb 2026
2 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling, repairing, rewinding & overhauling of the 415V, 50 Hz, 3-ph, 27 KW Submersible Pump-motor set (KSB make) including replacement of damaged components like casing wearing ring, impeller nut, bearing lock nut, mechanical seal (SIC VS SIC), bush for seal housing, rotor key and rotor lock nut, impeller key etc followed by testing and commissioning of the pump-motor set with trial run for a period of 03 days as per direction of EIC. | - | Job | - | - |
| 2 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. 4 CORE 16 SQ MM | - | Mtr | - | - |
| 3 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core 16 sq mm. | - | Nos | - | - |
| 4 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 16 sqmm cable. | - | Set | - | - |
| 5 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | - | Sq M | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Form.pdf
Tender Documents • 0.66 MB
BOQ_2482295.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .