Tender ID

Punjab

To Be Opened

Works

Machineries/ Mechanical Engg Items

Bypass Gates Work of MHP

Department of Power

MHP PH 1 to 4 Talwara | Hoshiarpur, Punjab

Amount: Refer DocsCloses: 6 Apr 2026Closed

Timeline

Published20 Mar 2026
Closed6 Apr 2026
Bid Opening7 Apr 2026

Tender Value

Refer Docs

EMD Value

₹81,280

Closing Date

6 Apr 2026, 11:00 amClosed

Tender Inviting Organisation

Name

Resident Engineer MHP Talwara

Address

Resident Engineer MHP Sector 3 Talwara

Work Description

Supply cum replacement of important defective components parts of radial bypass gates of Power house 1 to 4 of Mukerian Hydel Project PSPCL Talwara

Tender Information

Tender ID

2026_POWER_163976_1

Reference Number

32/RE/MHP/2025-26

Tender Type

Open Tender

Product Category

Machineries/ Mechanical Engg Items

Form of Contract

Tender cum Auction

Period of Work

30 days

Location

MHP PH 1 to 4 Talwara

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per DNIT

Documents Required

3 documents required · 3 mandatory

Fee

RequiredDeposit Tender Fee and EMD as per NIT (.pdf)

PreQual/Technical

RequiredSubmit or upload Technical bid as per NIT (.pdf)

Finance

RequiredFill online sheet for quoting rates as per NIT (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,180

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹81,280

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

20 Mar 2026

Published

20 Mar 2026

Bid Opening

7 Apr 2026

Download Starts

20 Mar 2026

Download Ends

6 Apr 2026

Submission Starts

20 Mar 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Scope of Work : Dismantlement and supply/replacement of important defective components/parts of radial bypass gates of Powerhouse no. 1& 4 of Mukerian Hydel Project, PSPCL, Talwara complete in all respect: Details
1.01	Dismantling of existing 2 Nos. trunnion bushes of radial bypass gate and replacement with new bushes (to be provided by PSPCL), including minor repair of shaft, resizing/fitting of bush as required, cleaning, minor welding and grinding works, and replacement of lubricant, complete in all respects. (02 nos. per gate)	-	Nos.	-	-
1.02	Dismantling of existing 1 No. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber Top Seal of 7.0 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of MS studs 16×65 mm with washers & nuts and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (01 No. per gate).	-	Nos.	-	-
1.03	Dismantling of existing 2 Nos. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber side Seals of 3.6 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (02 nos. Per gate)	-	Nos.	-	-
1.04	Dismantling of existing 1 No. Seamless Neoprene oil- & heat-resistant Wedge type rubber seal bottom Seal size 7.0m and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut wherever required, complete in all respects (01 nos. Per gate)	-	Nos.	-	-
1.05	Dismantlement and supply cum replacement of Guide Roller (Guide plate roller) & shaft (Pin) of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide roller & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.03] (04 nos. per gate)	-	Nos.	-	-
1.06	Dismantlement and supply cum replacement of Guide Wheel (Guide plate wheel) & shaft (Pin) of Floats of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide wheel & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.04] (16 nos. per gate)	-	Nos.	-	-
1.07	Dismantlement and supply cum replacement of Bearing no.30210 (SKF Make) of 19mm Steel wire rope pulleys of radial bypass gate. Bush & shaft (Pin) of 32/40mm Steel wire rope pulleys of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for shaft (Pin) is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of Bush & shaft (Pin)]. (04 nos. per gate)	-	Nos.	-	-
1.08	Dismantlement and supply cum replacement of Thrust ball bearing no. 51408 (SKF Make) along with I-bolt & nut of Float of radial bypass gate. Material used for I-bolt & nut of Float is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of I-bolt & nut of Float]. (02 nos. per gate)	-	Nos.	-	-
-	Dismantlement and supply cum replacement of Oil seals of gearbox of radial bypass gate. Material used for Oil seal is Nitrile-butadiene rubber (NBR) seal. (Refer to Site Sample) (02 nos. of gearbox per gate)	-	Nos.	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.30 MB

Work Item Documents

EDNITGATE.pdf

Tender Documents • 0.55 MB

BOQ_332077.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Scope of Work : Dismantlement and supply/replacement of important defective components/parts of radial bypass gates of Powerhouse no. 1& 4 of Mukerian Hydel Project, PSPCL, Talwara complete in all respect: Details
1.01	Dismantling of existing 2 Nos. trunnion bushes of radial bypass gate and replacement with new bushes (to be provided by PSPCL), including minor repair of shaft, resizing/fitting of bush as required, cleaning, minor welding and grinding works, and replacement of lubricant, complete in all respects. (02 nos. per gate)	-	Nos.	-	-
1.02	Dismantling of existing 1 No. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber Top Seal of 7.0 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of MS studs 16×65 mm with washers & nuts and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (01 No. per gate).	-	Nos.	-	-
1.03	Dismantling of existing 2 Nos. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber side Seals of 3.6 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (02 nos. Per gate)	-	Nos.	-	-
1.04	Dismantling of existing 1 No. Seamless Neoprene oil- & heat-resistant Wedge type rubber seal bottom Seal size 7.0m and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut wherever required, complete in all respects (01 nos. Per gate)	-	Nos.	-	-
1.05	Dismantlement and supply cum replacement of Guide Roller (Guide plate roller) & shaft (Pin) of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide roller & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.03] (04 nos. per gate)	-	Nos.	-	-
1.06	Dismantlement and supply cum replacement of Guide Wheel (Guide plate wheel) & shaft (Pin) of Floats of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide wheel & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.04] (16 nos. per gate)	-	Nos.	-	-
1.07	Dismantlement and supply cum replacement of Bearing no.30210 (SKF Make) of 19mm Steel wire rope pulleys of radial bypass gate. Bush & shaft (Pin) of 32/40mm Steel wire rope pulleys of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for shaft (Pin) is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of Bush & shaft (Pin)]. (04 nos. per gate)	-	Nos.	-	-
1.08	Dismantlement and supply cum replacement of Thrust ball bearing no. 51408 (SKF Make) along with I-bolt & nut of Float of radial bypass gate. Material used for I-bolt & nut of Float is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of I-bolt & nut of Float]. (02 nos. per gate)	-	Nos.	-	-
-	Dismantlement and supply cum replacement of Oil seals of gearbox of radial bypass gate. Material used for Oil seal is Nitrile-butadiene rubber (NBR) seal. (Refer to Site Sample) (02 nos. of gearbox per gate)	-	Nos.	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Scope of Work : Dismantlement and supply/replacement of important defective components/parts of radial bypass gates of Powerhouse no. 1& 4 of Mukerian Hydel Project, PSPCL, Talwara complete in all respect: Details

1.01

Dismantling of existing 2 Nos. trunnion bushes of radial bypass gate and replacement with new bushes (to be provided by PSPCL), including minor repair of shaft, resizing/fitting of bush as required, cleaning, minor welding and grinding works, and replacement of lubricant, complete in all respects. (02 nos. per gate)

Nos.

1.02

Dismantling of existing 1 No. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber Top Seal of 7.0 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of MS studs 16×65 mm with washers & nuts and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (01 No. per gate).

Nos.

1.03

Dismantling of existing 2 Nos. Seamless Neoprene oil- and heat-resistant J-type Musical Hollow Bulb Rubber side Seals of 3.6 m length and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut and SS countersunk bolts 16×65 mm with washers & nuts wherever required, complete in all respects (02 nos. Per gate)

Nos.

1.04

Dismantling of existing 1 No. Seamless Neoprene oil- & heat-resistant Wedge type rubber seal bottom Seal size 7.0m and replacement with new seal (to be provided by PSPCL), including careful removal of old seal, cleaning and minor repair of keeper plate, cleaning/grinding of bypass gate surface, and welding/fixing of SS Hex bolt 16×65 mm with washers & nut wherever required, complete in all respects (01 nos. Per gate)

Nos.

1.05

Dismantlement and supply cum replacement of Guide Roller (Guide plate roller) & shaft (Pin) of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide roller & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.03] (04 nos. per gate)

Nos.

1.06

Dismantlement and supply cum replacement of Guide Wheel (Guide plate wheel) & shaft (Pin) of Floats of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for guide wheel & shaft (Pin) is Structural Steel EN8 (IS 226). [Refer to Drawing no.04] (16 nos. per gate)

Nos.

1.07

Dismantlement and supply cum replacement of Bearing no.30210 (SKF Make) of 19mm Steel wire rope pulleys of radial bypass gate. Bush & shaft (Pin) of 32/40mm Steel wire rope pulleys of radial bypass gate. Material used for bush is Phosphor Bronze Grade-II (UNS- C51000) and material used for shaft (Pin) is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of Bush & shaft (Pin)]. (04 nos. per gate)

Nos.

1.08

Dismantlement and supply cum replacement of Thrust ball bearing no. 51408 (SKF Make) along with I-bolt & nut of Float of radial bypass gate. Material used for I-bolt & nut of Float is Structural Steel EN8 (IS 226) [Refer to Site Sample for Dimensions of I-bolt & nut of Float]. (02 nos. per gate)

Nos.

Dismantlement and supply cum replacement of Oil seals of gearbox of radial bypass gate. Material used for Oil seal is Nitrile-butadiene rubber (NBR) seal. (Refer to Site Sample) (02 nos. of gearbox per gate)

Nos.