INTERCHANGING OF THE HEATING SYSTEM AND OTHER SUBSYSTEM OF 630 TON ISOTHERMAL PRESS SPP0047 AND SPP0048 AT FORGE SHOP, BLOCK-6, ENGINE DIVISION.

SHIFTING OF INDUCTOR POWER PACK FROM SPP0047 TO SPP0048

DISCONNECTING POWER SUPPLY , CONTROL CABLES AND RECONNECTING THEM ON THE OTHER MACHINE.

SHIFTING THE SAME TO DESIGNATED LOCATION

LAYING HAL PROVIDED POWER CABLE IN DESIGNATED ROUTE

GROUTING OF THE CABLE ON WALL OR IN LAYING UNDER GROUND AND PLASTERING THE SAME AS PER SITE REQUIREMENT ARE IN CONTRACTOR SCOPE

PROVISION OF EMERGENCY WATER SUPPLY IN SPP0048

SUPPLY OF 1000 L WATER TANK WITH ALL FITTINGS

FABRICATE MS STAND OF 20 FEET HEIGHT AND BASE TO ACCOMMODATE WATER TANK OF 1000 L CAPACITY (INCLUDES SUPPLY OF MATERIAL)

SUPPLY AND LAYING OF ½” PIPE LINE FROM TANK AND CONNECTING THE SAME TO MACHINE LINE

SUPPLY AND INSTALLATION OF NRV IN MAIN LINE TO BLOCK THE MAIN LINE WHEN EMERGENCY WATER FLOWS TO THE MACHINE

SUPPLY AND INSTALLATION OF ELECTRICALLY OPERATED SOLENOID VALVE IN EMERGENCY LINE. THE VALVE SHOULD AUTOMATICALLY OPEN WHEN POWER SUPPLY FAILS.

EXISTING WATER MANIFOLD CAPACITY TO BE ENHANCED IN SPP0048

SUPPLY OF RAW MATERIAL AND FABRICATION OF NEW SS TANK OF CAPACITY 40 LITRES FOR COLLECTION OF DRAIN WATER.

THE TANK SHOULD ACCOMMODATE 6 NOS OF ½” VALVES IN INLET AND 6 ½” VALVES IN OUTLET. (SUPPLY OF 1/2" VALVES)

SUPPLY OF ½” FLEXIBLE RUBBER HOSE WITH HEAT RESISTANT HOSE

SUPPLY OF 10 NOS OF 1/2” SS BALL VALVES

SUPPLY OF 10 NOS OF ¾” SS BALL VALVES

EXISTING WATER HOSE PIPES TO BE REPLACED. (LABOUR PORTION)

SHIFTING OF CHILLER UNIT AND TANK

THE EXISTING CHILLER UNIT WITH TANK SHOULD BE MOVED TO DESIGNATED LOCATION.

CONNECTING THE SAME WITH THE HEAT EXCHANGER OF HYDRAULIC POWER PACK

INTERCHANGE OF DIE BOLSTER UNITS AND RELATED ITEMS OF SPP0047 AND SPP0048

THE DIE BOLSTERS OF BOTH MACHINES ARE TO BE INTERCHANGED AND FINAL INSTALLATION AND CHECK OF PARALLELISM FOR AXIS SHOULD BE PERFORMED.

SHIFTING OF TRANSFORMER , MAIN SWITCH , HEATING BLOCK FROM SPP0048 TO SPP0047

SHIFTING OF INDUCTOR COIL FROM SPP0047 TO SPP0048

SUPPLY OF MATERIAL AND PROVISION OF STAND FOR CABLE HOLDING OF RESISTANCE HEATER

INTERCHANGE OF HEATER CONTROL PANELS OF SPP0048 AND SPP0047

BRASS BOLT M6X50 MM (L) ALONG WITH 2 WASHERS AND 1 NUT ARE TO BE PROVIDED BY THE CONTRACTOR (QTY : 200 SETS)

TEFLON (PTFE) TUBE FOR INSULATION 6 MM ID , 12 MM OD (50 MTRS)

HAND / MANUAL HANDLE OPERATED LUBRICATION PUMP FOR CENTRALISED LUBRICATION