Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC 487 A 1 GOPAL MISHRA ROAD BEHALA KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | ₹4.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.5 LRejected-Finance | ₹4.5 L | L2 | Rejected-Finance L2 |
| 3 | L3₹4.5 LRejected-Finance VILL KHAIJAPUR P O BELKULAI DIST HOWRAH 711322 | HOWRAH | WEST BENGAL | 711322 | ₹4.5 L | L3 | Rejected-Finance L3 |
Tender Value
₹4.4 L
EMD Value
₹9,100
Closing Date
2 Apr 2026, 12:00 pmClosed
EE, FAWS-I, EM, KMDA
OFFICE OF THE EXECUTIVE ENGINEER, DIVISION-FAWS-I, E-M SECTOR, KMDA, 19 G T Rd, HIT BUILDING (3RD FLOOR), HOWRAH -711101
Supply, delivery, installation of Two (02) no Auto-manual control panel with time switch rating up to 20KW Submersible P/M set at Jagacha Hospital Road and Bankra Adarshapally P/H and other E-M works at different Pump Houses under FAWS-1 scheme.
2026_KMDA_1021325_1
EE(E/M)/FAWS-1/2W - 32/25 - 26/116 Date- 11.03.2026
Open Tender
Electrical Work/ Equipment
15 days
Jagacha Hospital Road and Bankra Adarshapally
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹9,100
14 May 2026
25 Mar 2026
6 Apr 2026
25 Mar 2026
2 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Delivery & Installation of 415 V, 3 Phase, 50 hz Auto-manual 20 KW Star-Delta starter Control Panel for Submersible pumpmotor Set. (as per enclosed details specification) Mk- Sellwin/Electromech/ AC Power/Equivalent as per direction of EIC. | |||||
| 2Supply, Delivery at site 1.1 KV grade insulated Al rmoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 | |||||
| 3Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. | |||||
| 4Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. | |||||
| 5Supplying and fixing 100/125 A Sheet steel Main Switches on angle iron frame on wall. | |||||
| 6Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box,making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 10 mtr. | |||||
| 7Supply & delivery of Cast iron double flanged single door swing Non-Return Valve generally conforming to IS 14846 having body, door cover in graded cast iron to IS 210 Gr. FG 200, body and door rings and bearing block of leaded tin bronze to I.S 318 Gr. LTB 2, hinge pin of ST AISI410 valves suitable for maximum working pressure of 10/16 kg/cm2 and body tested 15/24 kg/cm2.Diameter in mm 150mm | |||||
| 8Supply & delivery of fabricated MS Kiosk made from 16 SWG MS Angle (18'',16'',8'') incl. Providing Al busbar of 60 A rating for main Supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC. | |||||
| 9Double end flange 150 mm dia 90 bend ISImarked-IS 1239, | |||||
| 10C.I sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gun metal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed completed. size-125/150 mm. Mk-IVC/Sree Durga/Fluid Tech/Sigma flow. | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
BOQ_2510381.xls
BOQ • 0.34 MB
Docs29_F1.pdf
Tender Documents • 0.73 MB
Download all tender documents and submit your bid