NIT-25 of 19-20 REPAIR TO BRICK WORK, JOINERY, PAINTING, PLUMBING WORK, ROOFING, FLOORING, PATHWAYS, HARDSTANDING, WALLS, DRAINS, FENCING, SEWAGE CLEANING, RETAINING WALL AND OTHER MISC ITEMS IN RR UNITS OF 9 SECT UNDER GE (I) 873 EWS

Amount

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone as provided in lieu of stone bond stone as per Serial Item No '08' here-in-after shall be deducted from total cumulative quantity of stone masonry.

All as per the description of Serial Item No '06' here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No '04' complete, all as specified and as directed.

Pre-cast cement concrete, 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete all as specified & directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm, complete all as specified & directed.

Raking out joints / poiting to random rubble or polygonal rubble uncoursed or brought upto course work built in cement mortar, complete all as specified & directed.

Raised pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:4, complete all as specified & directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

PVC (SWR) pipe 110mm bore single socketed in any length as in weep holes complete all as specified and as directed.

Boulder filling dry, hand packed tightly, gauge exceeding 80mm not exceeding 150mm, as in back filling of retaining wall complete all as specified and as directed.

Restraining and resecuring, galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc all as specified and as directed. Note : Each line wire shall be measured.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1: 6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of flooring, finished even and fair to receive floor finishes, complete all as specified & directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in path, finishing surface even and fair without using extra cement including making chequered finish complete as specified and directed.

100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base, finished even and fair to receive floor finishes, complete all as specified & directed.

40mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

Non-skid coloured glazed ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Non-skid coloured glazed ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete.

Precast cement concrete coloured glazed interlocking tiles 60mm thick conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed.

Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges cement concrete complete all as specified and as directed.

Taking down shutter of any description, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each all as specified and directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Sliding door bolts, mild steel, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Mild steel barrel tower bolt of stove enamelled black with bright bolt and fixed complete of size 150mm long complete all as specified and directed.

Aluminium handles, cast type, anodised handles of size 150mm, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

All as per the description of Serial Item No '42' here-in-before but fixing only using serviceable sheets obtained from Serial Item No '41' complete, all as specified and as directed.

0.80mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

4mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal

flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

9mm thick, Veneered decorative plywood, 5 nos of ply, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work complete all as specified and directed.

2nd class softwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and as directed.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions, fixed in repirs, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe complete all as specified and as directed.

Brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union, complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed wares, AC or reinforced concrete) 150mm dia set in cement mortar, complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed.

Salt-glazed stone ware (SGSW) grade-A drain pipes 150mm bore laid and jointed in concrete bed complete including testing etc. all as specified and directed as per SSR Part-I specifications, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any descrition and in any position not otherwise specifically provided for, complete all as specified and directed.

PCC 1:3:6 type C-2 (using 20mm graded aggregate) as in surface channels and drains using 40mm graded crushed stone aggregate complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Preparation old plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spot, applying one coat of white wash, complete all as specified and directed.

Preparation old plastered surfaces of ceilings including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spot, applying one coat of white wash, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint (in camouflage pattern or as directed) including one coat of cement primer complete all as specified and directed.

Preparation old plastered surfaces of walls and applying one coat of cement base paint (in camouflage pattern or as directed) complete all as specified and directed.

Preparation old plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed.

Preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

VARDHMAN INTERNATIONAL

VEER TRADERS

M/s Jamsheed Ahmad Dar

Bidder Name

VARDHMAN INTERNATIONAL

M S BANSI LAL CONSTRUCTION CO

VEER TRADERS

M/s Jamsheed Ahmad Dar