NIT NO: 937/TC/2026-27

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead up to 1000 meters and as per relevant clauses of section-200 in Lime / Cement Concrete

Excavation in soft/ disintegrated/ weathered rock including wet excavation, dressing, placing the excavated material neatly in specified dump area or disposing off the same as directed, including cost of dewatering, site clearance, all materials, machinery, labour and dressing, including all lead and lifts etc., complete.

Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material including dewatering etc. complete.

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. ..

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. With Batching Plant, Transit Mixer and Concrete Pump RCC Grade M30

Supplying , fitting and placing HSD (High strength deformed steel) bar reinforcement in foundation complete as per drawing and technical specification as per section 1600.

Providing and laying Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications section 1500, 1700 and 2200 (Newly laid concrete shall be covered by gunny bags). Height upto 5m With Batching Plant, Transit Mixer and Concrete pump R.C.C. Grade M-30

Height 5m to 10m With Batching Plant, Transit Mixer and Concrete pump R.C.C. Grade M-30

Height above 10m With Batching Plant, Transit Mixer and Concrete pump R.C.C. Grade M-30

Supplying, fitting and placing HSD (High Strength Deformed Steel) bars reinforcement in sub-structure complete as per drawing and technical specifications section 1600 and 2200.

40 mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone

Extra for providing edge moulding to 15mm thick stone counters, vanitiesetc. including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.

Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

Carriage by mechanical transport upto 5 km lead:

Dismantled Building debris (Mulba) (Item no-1)

Providing and laying 1.5 m deep in rock and 1.5 m above rock 25 mm dia Tor Steel dowel bars in foundation including drilling 65mm dia bore hole in rock necessary bending, hooking, tying, reinforcement in position and grouting etc. complete as per drawings and specifications.

Dewatering and pumping of the working area including all connected operations of laying of pipe line, removal of all seepage and other operations required for maintaining cleanliness for construction work- By diesel pumps More than 5HP to 10HP

More than 10HP to 20HP

Providing and laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grade cement concrete with a minimum cement content of 250 kg/cum as per specification.

Providing and applying for hermetically water proof sealing of vertical / horizontal expansion joint with approved make Poly Sulphide Sealant compound (two component elastomeric sealant) having 80% tensile modulus elongation, proper bonding with building surface complete with cleaning and preparing of building surface, applying polymer solvent primer, providing and fixing PU back up rod of suitable dia in expansion joint for core making, filling with Poly Sulphide Sealant (Sealant filling depth should be minimum half of the joint gap), finishing and smoothing the surface etc complete. The application shall be got done through the authorised applicator of the manufacture of compound For gap upto 25 mm wide

Providing and laying 1.5 m deep in rock and 1.5 m above rock 25 mm dia Tor Steel dowel bars in foundation including drilling 65mm dia bore hole in rock necessary bending, hooking, tying, reinforcement in position and grouting etc. complete as per drawings andspecifications.

Consolidation grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machinery, labour, redrilling, if necessary, required admixtures with all other ancillary operations complete including all lead and lifts.

Providing and applying acrylic modified resin EXTERIOR TEXTURED with special quality silica quartz plaster as an intermediate coating on external surface giving protective layer and decorative finish on plastered surface in approved design and shade (product such as Asian Apex Series Duracast Dulux weathersheald sandtax creation) as per manufacturer's specifications inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc.complete for the work. 1.5mm thickness (average) having spray coat finish with special rollar.

Labour only for filling empty cement bags with sand including stitching with sutli and stacking.

Providing and constructing contraction joints by fixing 16 SWG 60 cm wide annealed copper sheets in single line with 8 mm dia. steel dowel rods on either side at 1 metre interval including cost of all materials, machinery, labour and all other ancillary operations complete including all leads and lifts.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment and cement Grouting withC.M. 1:4 in Pitching of gap between stone/ block complete as per drawing and Technical specifications as per section 2504 Cement Concrete blocks of size 0.3x0.3 x0.3 m cast in cement concrete of Grade M15. (Side Bank Slope)

Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per any relevant section 700 and 2504 of specifications.

Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material including dewatering etc. complete..

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification 710.1.4 of I.R.C. 78 and 2200. (i) Granular material

Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia. AC pipe, extending through the full width of the structure with slope of 1 V: 20 H towards drawing face. Complete as per drawing and Technical specifications section 2706 and 2200.

Providing and making 6mm thick cement plaster of mix:In Cement mortar 1:3 (1 cement : 3 fine sand)

Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer.

Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4.0 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty , Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work . (This Item to be use in heigher grade painting works Item No. 14.65)

Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal ofexcavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soils

Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).

Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:5:10 (1 cement : 5 coarse ssand :10 graded stone ggregate 40 mm nominal

Construction of Rc open drain 0.6mx0.6m inside dimension lined with 120mm thick RCC M20 walls , 120mm thick CC M20 foundation over 100 mm thick (Av ) levelling course in PCC M15 including excavation , dressing of sides and bottom. Provisio of HYSD reinfoceent consisting 8mm dia horizontal bars @ 150mm c/c and L shaped 8mm dia vertical bars @150mm c/c(L=800mm), including cutting , bending and binding wire, placing in position, providing shuttering and concreting by using concrete mixture compaction by vibrator complte.

Construction of RCC drain/chamber cover, placing in position,providing shuttering and concreting by using concrete mixer,providing shuttering and concreting by using concrete mixer,compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement with RCC M-20

HYSD reinforcement

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand).

Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cmPigment Coloured (rubber mould) precast interlock concrete blocks

Providing and fixing precast compressed plain cement concrete edge restraint block of size 500mmx250mmx60mm of compressive strength of 200kg per sq.cm manufactured by electro hydraulically operated block machine by excavated trench of 150mm depth, laid width wise etc. complete

Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately):Red sand stone - exposed face fine dressed with rough backing.30 mm thick.

Providing and fixing clamps of required size and shape for anchoring stone wall lining to the baking or securing adjacent stone in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases and/or holes in stone/wall.Stainless steel cramps with stainless steel nuts and bolts and washer (total weight not less than 260 gms).

Providing and fixing copper pins 7.5 cm. long 6mm dia. for securing adjacent stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making necessary chases.

Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C ( Glossy /Semi Glossy finish ) (Product such as Asian Ace , Dulux Promise Exterior , Berger Wall Masta , Nerolac Suraksha Plus , Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty)

Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment).

Rough dressing the trenched ground including breaking clods.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing the ground

Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).

Mixing earth and sludge or manure in proportion specified or directed.

Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction

Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materialsdeclared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50m lift upto 1.5 m complete (cost of sludge,manure or extra earth to be paid for separately).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep.

Holes 60 cm dia, and 60 cm deep.

Filling mixture of earth and sludge or manurein the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).

Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hedges like Alife, Dorenta, Tikoma etc

Furn like Arica, China etc (3 year old)and small shrub

ground cover small plants

Hibiscus (Flower)/ Rose

carpet grass well developed

Human and other sculptures (Parking Area) (a) 5 to 7 feet

( b) 2 to 5 feet

Cement art Mural work (Parking Area)

Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).

Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. M-30 Grade

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 550D

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

Edge of slab, breaks in floor and walls upto 200mm

Columns, Pillars, Piers and likes- rectangular or square in shape

Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes

Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

Beams, lintels, cantilevers & walls

Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation:

Providing and fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours shades over 20mm thick bed of cement Mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x300mm thickness 7 to 8mm

Providing and making moulded mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: 18 mm thick

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone (Moulding)

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. M-25 Grade

Brick work with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)

Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Providing and making 18mm thick cement plaster in two coats with under layer of 12mm thick plaster 1:5 (1 cement : 5 fine sand) and top layer of 6mm thick with cement plaster 1:3 (1 cement : 3 fine sand) finished rough with sponge.

Extra for plastering done on mouldings, cornices or architraves including neat finish to line and level.

Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion , Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty).

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

Providing ,supplying & Fixing in position of Red Sandstone Tekra (Approx size -550 X 650 X 150 mm) in various design elements for all levels, including the cost of ornamental stone work moldings and carvings, and polishing of the stone . Thats before execution as per drawing and sample preparation by the contractor. Fixing of Tekra in M.S. structure frame of (Frame Structure will be paid separatly) with fastner at all height as mentioned in the drawing.

Providing, Supplying and fixing in position approved Mural works in Multi Color Sandstone work (Exposed face machine cut and table rubbed , polished with rough backing. . (100 mm thick outer frame and 40 mm thick internal design elements machine cut edges) for wall lining etc. (veneer work) at all height as mentioned in the drawing , backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade in red sand stone - and aprroved by engg-in-charge.

Providing ,supplying & Fixing in position of Red sand stone bench with precise Dimnsion of 1500mm in length 450mm in width and 600mm in height, legs thickness125mm, seat thickness- 75mm and back thickness 50 mm complete with detailed carving and ornamentation and designer logo of approved design .Design and Drawing to be approved by the architect in charge & Engg. in charge.

Providing ,supplying & Fixing in position of Sand Stone barricade , Sand Stone Movable Barricade Constructed in Various Stone Elements (i.e. 2 No’s of Column (Base's 350 X 350mm, having 4mm Thk. SS 304 Base Plate, & 150mm X 150mm Solid Vertical Stone Designer Pillar Of Height 750mm And 7 No's Of 65mm X 65mm X 500mm Height Solid Stone Designer Pillar Fixed on Bottom and Top Rail (125mm X 100mm Ht.) (Having 4mm Thk. Ss304 Base Plate).This Barricade is Mounted on two pair Double assambly Heavy Duty SS Wheels, This Barricade is included with the Stone Curve Edges, Polishing, Carving Work, Designer Top Coping and Design Element works on Both the Pillars, Base, Top Coping and As Per The Detailed Design And Drawings (As per the Sample Approved by the Engineer In - Charge).

Providing & Fixing of Red sand stone bollard of size 250 mm dia ( top dia - 150 mm ) X 1000mm height, finish sanded with a polished effect inlcuding rate of engraving and illustrations design and drawing. Bollard should be fixed complete With 200mm deep in paved portion Work with P.C.C.M-15 and aprroved by engg-in-charge.

Providing and Fixing of (G.R.C) Embossed Panel in approved pettern with Following size & thickness. GRC member finish with all fitings & Fixed in tubular Pipe Size 50 x 50 x 4 mm with help of fastner and applying a priming coat of red oxide zinc chromate primer in all steel structure in all level Lift and lead incluing scaffolding. etc complete and aprroved by engg-in-charge. GRC Embossed Panel - 900mm x 900mm Thickness 50mm

GRC ARC - 575mm x 225mm Thickness 150mm

GRC Inner Arch -2680mm x 1650mm Thickness 300mm

GRC Big Arc Size – Width - 5170 mm X Height - 2740 mm X Depth – 150 mm

GRC Small Arc Size – Width - 3500 mm X Height - 1975 mm X Depth – 150 mm

GRC INNER ARC Size – Width - 3000 mm X Height - 1210 mm X Depth – 150 mm

GRC Moulding -2680mmx1650mm, Thickness 300mm

GRC Window Set With size 900mm x 900mm Thickness 50mm

Providing and fixing structural steel frame (for dry cladding of sand stone) on walls at all heights using M.S. square/ rectangular tube in the approved pattern including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block of grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of size 300x230x300mm and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes, approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of "ZINC" primer and painted with two or more coats of epoxy paint. (Stainless steel cramps shall be paid separately)

Cement Concrete Pavement (Construction of un-reinforced, doweljointed, plain cement concrete pavement over a prepared sub-base,coarse and fine aggregate conforming to IS:383, and graded as pertable 600-3, mixed as per approved mix design at site, laid, spread,vibrated, compacted and finished in a continuous operation includingprovision of contraction, expansion, construction and longitudinaljoints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.) With Cement concrete grade M-30 and minimum cement content @375 kg/cum.

Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork an expansion, contraction & longitudinal joints as per design and as per IRC-62-2014, over a prepared base a per approved mix design and finishing to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. With Cement concrete grade M-30 and minimum cement content @375 kg/cum.

Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cementratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601.)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.)

Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorized sign as per IRC:67-2012 made of retro-reflective type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area exceeding 0.9 sqm and fixed on a mild steel frame of size 40x40x5 mm supported on 2 nos, mild steel angle iron post 75mm x 75mm x 6mm, . firmly fixed to the ground with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing) Made of Class B high intensity microplastic grade sheeting of type IV (for MDR)

Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67-2012 made of Micro prismatic grade type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single back frame of ISA 40x40x5 mm, supported on a angle iron post of size 75 x 75 x 6 mm firmly fixed to the groundwith M15 grade cement concrete 45 x 45 x 60cm, 60cm below ground level as per approved drawing)) Made of Class B high intensity microplastic grade sheeting of type IV (for MDR)

Road Markers/Road Stud with Lens Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminum, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BIS:873, part-IV:1973)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Excavation for drain (Earth work in excavation for drain/chamber as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)

Plain cement concrete complete as per drawing and Technical Specifications. PCC Grade M 15

Providing & laying precast interlocking concrete blocks of minimum compressive strength of 300 kg/sq.cm and approved size , shape/ pattern over coarse sand bed of thickness upto 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63-2004. 80mm thick Plain precast interlock concrete block

Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in PCC M20 grade on PCC M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)

Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White wall hung type

Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x400 mm

Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams)

Piller Cock (400 grams)

Angle valve for basin mixer and geyser points (450 grams)

Bottle trap set with extension pipes

Toilet paper holder

Soap dish plate

Health foscet (hand jet) with flexible connection pipe (for WC)

Providing and fixing stainless steel drain jali of approved make/quality.

Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality: 45 cm length

Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia

75 mm dia

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe

Providing and fixing sand cast iron S&S bend with access door of required degree as per IS : 1729, insertion rubber washer 3 mm thick, bolts and nuts: 100 mm dia

Providing and fixing sand cast iron S&S plain bend of required degree as per IS : 1729: 100 mm dia

Providing and fixing sand cast iron S&S heel rest sanitary bend as per IS : 1729: 100 mm dia

Providing and fixing sand cast iron S&S single equal junction with access door of required degree as per IS : 1729, insertion rubber washer 3 mm thick, bolts and nuts: 100x100x100x100 mm

Providing and fixing sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm as per IS: 1729 complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet

Providing fixing and push on jointing sand cast iron S&S pipe as per IS: 3989 for soil, waste and vent pipes including EPDM rubber gasket complete: 100 mm dia

75 mm dia

Providing and fixing stainless steel drain jali of approved make/quality

Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 110 mm dia pipe

Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm

Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx650 micron thick (0.65mm), finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 150mm diameter and weighing not less than 440 grams.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

65 mm dia nominal bore

80 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter RCC pipe

Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Extra for depth for manholes : Size 90x80 cm

Providing and constructing brick masonry circular arch type manhole upto 1.67m depth, 0.91m internal dia at bottom and 0.56m dia at top having brick masonry wall 190mm thick with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, providing and fixing S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg, in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all complete as per standard design (excavation and foot rests shall be paid for separately) : Manhole of depth 0.91m.

Providing and constructing extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m and upto 1.67m

Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

Providing and laying in trenches 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including excavation of trenches, refilling the same and testing of joints complete. PN - 16 Pipe, 20 mm OD

PN - 16 Pipe, 25 mm OD

PN - 16 Pipe, 32 mm OD

PN - 16 Pipe, 40 mm OD

PN - 16 Pipe, 50 mm OD

PN - 16 Pipe, 63 mm OD

PN - 16 Pipe, 75 mm OD

PN - 16 Pipe, 110 mm OD

Providing and placing in position C.I. sluice valves category “A” (Make: Kirloskar Bros. Ltd., Indian Valve Co. (IVC), Fouress Engineers Pvt. Ltd., WAG) (with cap) complete: 100mm dia

Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil upto 90 metre depth. 200 mm dia

Rocky strata including Boulders. 200 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge. 200 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc. All complete, for all depths, as per direction of Engineer-in-Charge. 200 mm nominal size dia.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 200 mm nominal size dia.

Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). Stone boulders of size range 5 cm to 20 cm, in recharge pit

Gravels of size range 5 mm to 10 mm, over the existing layer of boulders

Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.13.1 3 X 1.5 sq. mm in 20mm conduit

3 X 2.5 sq. mm in 20mm conduit

6 X 2.5 sq. mm in 25mm conduit

Supplying, installation, testing and commissioning of Acrylic LED light (a) Specification of Acrylic 3 mm thick x 3 " width x 4 " depth *(imbose) (b) Specification of LED modules :- Each Moduel should have 6 Nos LED of 1 watt

Supply and installation of timer including relay and contactor set complete as required.

Supplying and installation of SMPS (water proof) for power supply AC input 110/220 V 50/60HZ DC output 12V 30A

Fabrication and installation of angle iron including angle size 50 mm x 5 mm thick with labour charges including materials as per specification

Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work 6.62.1 4mm thick

Designing providing and fixing aluminium frame work made of special aluminium section on building face with M.S. angle iron brackets fixed on RCC structure with S.S. hold fasteners, including providing and fixing two sided structural adhesive tape of appropriate grade on aluminium section for fixing aluminium/glass panel, sealing on perihphery of frame work by providing EPDM gasket, silicon weather sealant between aluminium frame and building structure.

Supplying, installation, testing and commissioning of following RGBW LED Flood Light fitting (luminaries) IP 66 Rating, complete with electronic driver heat sink capacitor and all other accessories etc. as per specification. 6.67.2 120Watt

Supplying, installation , testing and commissioning of architectural LED recess round shape Spot light with housing material of frame of stainless trim, Cover material-tempered glass, system wattage not exceeding 6W and system lumen output of not less than 500 lumens with CCT 3000K, System efficacy ≥85Lm/W.Fixture should be available with beam angles of min range 20°- 25°, Luminaire should be capable to operate at 100-240 VAC. min life of 50,000 hours ,with IP66 rating . Working temperature range 0°C to 40°C and working humidity level of Up to 95% RH .Fixture should equipped with mechanical impact of minimum IK10 including all accessories fitting support etc as required

Supplying , installation , testiing and commissioning of following type Recessed LED Step Lighting fixture with IP66/65 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. LED shall having LM80 complied as per L70 standard LEDs minimum tested for 10,000 burning hours with 3000K CCTwith minimum life cycle 50000 hrs burning hours at 50˚C. Luminaire LED should have secondary Optic lenses. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC. Driver Power factor shall be 0.95 and above and THD shall be less than 10%. 6.79.1 3 Watt

Supplying, installation, testing and commissioning of following LED Rope light complete as per specification and IP65, P.F. should be greater than 0.75 6.93.1 9 Watt per Metre White / Warm White

9 Watt per Metre RGB

Supplying, installation, testing and commissioning of following LED Strip Light fitting complete with Electronic Driver, Heat sink and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65 6.94.1 7 Watt per Metre White /Warm White /Red /Blue /Pink / Yellow/Green Coloured

14 Watt per Metre White /Warm White /Red /Blue /Pink / Yellow/Green Coloured

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.5 3 pole MCCB, 125A, Adjustable Thermal - Magnetic Release, 25KA

3 pole MCCB, 160A, Adjustable Thermal - Magnetic Release, 25KA

4 pole MCCB, 250A, Adjustable Thermal - Magnetic Release, 35KA

Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep

Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.20.3 300 amp (50x5mm)

Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.16.1 20x5mm (100 amps)

30x5mm (200 amps)

50x5mm (300 amps)

Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 10.14.6 315 Amps

Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.4 315/5 amps

Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.

Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification

Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type

Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.1 Digital type

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification.

Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.6.4 3.5 x 120 sq. mm.

Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.1 20mm

Supplying , installation , testing and commissioning of following type Recessed LED inground/pathway Lighting fixture with IP67 protected Die-Cast Aluminum housing and High purity Lenses for superior performance. LED shall having LM80 complied as per L70 standard LEDs minimum tested for 10,000 burning hours with 3000K CCT with minimum life cycle 50000 hrs burning hours at 50˚C. Luminaire light should have secondary lenses. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC. Driver Power factor shall be 0.95 and above and THD shall be less than 10%. 6.80.1 6 Watt

Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, unarmoured, copper conductor control /power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification and IS: 694 (2010). 15.15.2 4 x 1.5 sq. mm

6 x 1.5 sq. mm

4 x 10 sq. mm

Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. 15.23..17 3½ X 120 sq. mm (45 mm)

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 3 X 1.5 sq. mm in 20mm conduit

3 X 2.5 sq. mm in 20mm conduit

Supplying of following 230/250 volts LED Flood light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Seperate housing for driver etc complete as per specification and P.A. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.29.10 250 watt

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA

3 pole MCCB, 125A, Adjustable Thermal - Magnetic Release, 25KA

Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.16.5 63 amps

Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 upto 300 mm deep

Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 10.14.4 100 Amps

Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.2 Analoge type

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification.

Supplying erection testing and commissioning of hot dipped galvanised (single dip 86 micron) 16 metre High mast pole on existing RCC foundation with all accessories and equipments, detailed as below to withstand wind pressure upto 180km/hr and minimum following specifications: a) HM shaft made of not more than 2 sections of suitable lengths with telescopic stressfit joints between sections without any circumpherencial welding, sheet thickness 4mm top and bottom sections, nominal dia 460mm on bottom and 150 mm on top, base flange 25mm thick 670mm dia, PCD of foundation bolts 650mm. b) Double drum winch for lowering & raising of lantern carriage on high mast with operatable with power tool/ manual handle attachment with a torque limiting device for safe locking of carriage. c) Raising/lowering type lantern carriage designed to carry specified nos of luminaries, control gear box, junction box. d) Top pulley assemble with weather proof cover. e) 3 Nos suitable length and size stainless steel wire ropes (minimum 6mm dia and 7/19 construction) for lowering & raising of lantern carriage. f) Suitable size and length multicore flexible copper power trailing cable (minimum 3 core 4 sqmm) g) Hinged service door in base section h) Base plate earthing terminal. i) Suitable arrangement for supply distribution with termination of suitable size underground cable in high mast. j) Lightning conductor finial made of 25mm dia 300 mm long G.I. tube having single prong. k) Anchor plate of size 840x840x6mm, tem-plates 3mm thick, GI foundation bolts 8 Nos of 30 mm dia 850 mm long (EN 8 Grade) along with nuts washers etc. (RCC fooundation and luminaries will be paid separately)

Designing and providing suitable and approved size RCC foundation for 12-30 mere high mast including seel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as required including laying and fixing HM foundation bolts with tam plates but excluding the cost of foundation bolts with tam plates etc complete as per specification

Excavation for foundation in soft soil/hard soil including dressing of sides and ramming of bottoms, lifting and getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres

Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).15.1.11 3.5 x 25 sq. mm.

Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .15.23.12 3½ X 25 sq. mm (25 mm)

Supplying, installation, testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/ night Camera (IP67, IK10) 1/3" 4MP PS CMOS Image Sensor, H.265 and H.264 triple- stream encoding, WDR (120dB). Day/ night Support, UL, CE FCC Certified as per the specifications.

Supplying, installation, testing and commissioning of 64 Channel NVR 8 Sata Port up to 64 chennal IP camera input, Max 320 Mbps incoming bandwidth, Smart h.265+/ H.264/ MJPEG, up to 12 MP resolution preview and playback, Support 8 SATA HDDs up to 10TB each, 1 eSata, 4 USB (2 USB 3.0, 2 USB 2.0), 2 HDMI/ 2 VGA simultaneous video output, ONVIF Virsion 2.4 conformance, Alarm In/ out 16/6, Two way talk 1 Channel Input, 2 channel Output RCA, 1 RS485, 1 RS232, 2 RJ-45 port (10/ 100/ 1000 Mbps), Support ANPR Camera as per specifications.

Supplying, installation, testing and commissioning of 8 Port Managable 8 PoE Switch 10/100/1000 / Port with 2 gifa SFP uplinkl, L2 Managed PoE switch, Power Budget max 96 W, single port 30w, AI extend, AI VLAN as per specifications.

Supplying, installation, testing and commissioning of 16 Port Managable PoE Switch 10/100/1000 / 16 Port with 2 gifa SFP uplinkl, L2 Managed PoE switch, Power Budget max 150 W, single port 30w, AI extend, AI VLAN as per specifications.

Supplying, installation, testing and commissioning of 8 TB Surveilleance Hard disk drive Complete as required.

Supplying, installation, testing and commissioning of 15U indoor Rack wallmount 15U 630D with front Glass Door Lock & Key 550 15U- (Fan, cable manager, PDU included) complete as required.

Supplying, installation, testing and commissioning of following size LED Moniter, Table/ Wall mount with inbult speaker minium 5X2, with minium 1 No of HDMI and USB port including remote control, connecting cable, batteries all other accessories connection etc as per specification. 27.49.2 43 inch

Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification

Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.1 20mm

Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.13 RJ-45 {CAT6} socket outlet

RJ-45 {CAT6} LAN, I/O Box

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010) 3.11.13 3 x 2.5 sq. mm

Supplying, fixing, testing and commissioning of following COB LED Spot Light fitting complete with electronic driver heat sink and all other accessories including connections earthing etc. complete as per specification and IP20, P.F. should be greater then 0.9 LED chip efficancy ratio≥ 100 lumens /watt. 6.18.2 9watt

Supplying, installation, testing and commissioning of following 230/250 volts LED street Light fitting with all accessories like driver, heat sink made of dia cast aluminium with IP 66 protection and 15 KV surge proction on pole bracket, including connection, earthing, Separate housing for driver etc. complete as per specification and P.F. should be greater then 0.9 LED chip efficancy ratio≥ 120 lumens /watt. 6.28.9 120watt

Supplying, installation, Testing and Commissioning of 3000K architectural LED flood light with housing material of Die-cast aluminium, dark grey powder-coated finish, system wattage not exceeding 70W and system lumen output of not less than 5000 lumens, Color temperature should be 3000K with CRI=80. Fixture should be available with architectural optics with range of beam angles of Narrow 8°–12°, Medium 15°–20° and Wide 35°–40°. Fixture should operate in a temperature range of 0°C to 40°C. Fixture should have input voltage for 220–240 VAC. Lifetime should be at least 50,000 burning hours at L70, with total IP66 protection. Fixture should be equipped with mechanical impact of minimum IK06 including all accessories support etc as required as per the specifications.

Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan on inner wall in ground below road, path etc. at a depth not less then 40 cm and up to 90 cm including excavated material, ramming and making the surface good etc. as per specification.14.1.1 63 mm outer dia and 50 mm inner dia

90 mm outer dia and 75 mm inner dia

120 mm outer dia and 103.5 mm inner dia

200 mm outer dia and 170 mm inner dia

Supplying and laying following size G.I. pipe in ground below road, path etc. at a depth not less them 40 cm and upto 90 cm including excavation, dismantling of road if riquired and reffiling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.3.1 50 mm internal dia

80 mm internal dia

Supplying and laying following sizes on number FRLS PVC insulated/ XLPE, PVC sheathed, steel armoure, aluminium conductor power cable 1.1 KV grade direct in ground at a depth not less then 40 cm and up to 90 cm including excavtion, sand cushioning, protective covering and refiling the trench etc. as per specification, IS 1554 (1988, Part 1)/ IS: 7098 (1988, Part 1) 15.1.2 2x6 sqmm

3.5x25sq. mm.

3.5x35sq. mm.

4 x10 sq. mm.

Supplying and laying following sizes one number FRLS PVC insulated/ XLPE, PVC sheathed, steel armoure, aluminium conductor power cable 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1)/ IS: 7098 (1988, Part 1) 15.3.2 2 x 6 sqmm

3.5 x 25 sq. mm.

3.5 x 35 sq. mm.

4 x 10 sq. mm.

Supplying and making end termination with brass campression gland and aluminum lugs for following size armoures aluminium conductor power cable 1.1 KV grade as per specification. 15.23.2 2 X 6 sq. mm (19mm)

3.5x25sq. mm. (25mm)

3.5x35sq. mm. (28mm)

4 x10 sq. mm.

Supplying, installation, testing and commissioning of following 230/250 volts LED BOLLARD fitting cool white/ warm white {Colour Temperature 3000/ 4000/ 5600/ 6000 K} with electronic driver, heat sink, capacitor and all other accessories on existing foundation/ pole bracket, including connection, earthing etc complete as per specification. P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.22.1 9watt

Supplying, installation , testing and commissioning of LED Bollard luminaire with Die-cast,polycorbonate diffuser, wattage not exceeding 18W,system lumen output-900lumen,Luminaire should be capable of operating at line voltage without any separate power supply from 100-277 V AC. Luminaire is sealed to IP65 protection.Luminaire should Be Compact with option of no up-light ,Colour temperature of 6500K with CRI-70 including all accessories support fitting etc as required

Supplying, installation, testing and commissioning of following 230/250 volts LED Post Top Lantern fitting with perplex cover/decorative diffuser, electronic ballast and all other accessories on existing gate column/ pole bracket, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9 . LED chip efficacy ratio ≥ 100 lumens /watt. 6.23.1 23 watt

Supplying, installation, testing and commissioning of following LED Spike Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65 6.24.1 9 watt

Supplying, installation, testing and commissioning of following LED Strip Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65 6.25.1 5 watt per metre LED Strip

Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral). 7.17.1 10 sqmm (32 amp)

16 sqmm (63 amp)

35 sqmm (125 amps)

Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep

Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.4 315/5

Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.

Providing and fixing penal mounting following rating analog type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.18.4. 0- 500amps

Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type

Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.1 Digital type

Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification.

Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 16mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 19.6.2 4 metre high, dia 130mm at bottom and 75mm at top, base plate size 200x200x12mm, foundation bolts 450mm long

5 metre high, dia 130mm at bottom and 75mm at top, base plate size 200x200x12mm, foundation bolts 600mm long

Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 19.7.2 7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long

Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at an angle of 102.50 including having MS triangular stiffener of size 150 × 50 × 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. 19.9.2 Single Over Hang 1.00 metre Long

Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 19.11.2 4 metre high

5 metre high

7 metre high

Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification.

Providing and making suitable CC pole collar (muffing) in Cement Concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) of size 0.4 m dia and 0.4 m height from existing CC foundation.

Supplying and fixing water tight terminal box made of 1.6mm thick M.S. sheet with detachable gland plate in bottom, hinged front open able cover, rubber gasket, having 1 Nos 4way connector and 1 No SPMCB inside the box for cable connection, fixed to pole with 2 Nos clamp made from 40x3mm M.S. flat with 2 No nut bolt dully painted with 2 coat of red oxide paint and 2 coat aluminium paint complete as per specification. 19.16.1 20x15x15 cms.

Supplying and fixing of single over hang (Arm) 1500 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI "A" Class pipe welded to 300 MM Long GI Pole canopy of suitable dia at angle of 102.50 Degree including having GI triangular stiffner and making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy including FRP Dome on existing pole etc. as per enclosed drawing and as per direction of engineer-in-charge.

Providing installation testing and commissioning of 15U Indoor Rack Wallmount 15U 630D With Front Glass Door Lock & Key 550 15U - (Fan, cable manager, PDU included) complete as required.

Supplying, installation, testing and commissioning of Digital Central Controller built-in WAV and MP3 recorder to external USB memory devices, built-in feedback suppressor and digital audio processing (DSP), DSP feature YES (built-in DSP Auto Mixer), mic connecting capability master control unit handles can control up to 240 units, recording capability inbuilt 1GB memory or USB device, should have feedback suppression and browser application with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of 5 Meters Digital Conference System Single Cable Compatible with respective conference System with all necessery terminals and connectors.

Supplying, installation, testing and commissioning of UHF Wireless Cardioid Condenser lapel microphone system with frequency response of 60 Hz to 16 kHz, RF sensitivity 10 dBµV (S/N 60 dB @ 20 kHz deviation) or better, total harmonic distortion <1.0% (at 1 kHz, ±20 kHz deviation) or better, dynamic range >108 dB or better, on/off switch operating range 60 mtrs or better, RF power output 10 mW or better, maximum output level XLR/Balanced: +4 dBV & 6.3 mm (¼") / Unbalanced: -2 dBV with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of advanced digital audio processor with open architecture software-configurable functionality, comprehensive library of DSP algorithms optimised for installation applications, 8 channels of wide band Acoustic Echo Cancellation (AEC) for telephone and video conferencing, auto mixer functionality for multiple microphone applications, optional Dante card for IP-based audio networking, PC-based software with intuitive graphical user environment, 10 high-headroom analogue universal mic/line inputs, 6 electronically balanced low impedance line level outputs, USB audio connection for integration with computer based audio, ULTRANET digital audio transport output for connection to compatible devices, Ethernet port for software configuration via CAT5/6 cable with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of Passive Column Array Loudspeaker with 7 Mid Range Drivers and FAST Dispersion Control for Installation Applications (EN 54 Certified), 7 x 3.5" full range drivers with 150 W RMS Power @ 8 Ohms with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of 4 Channel Audio Amplifier Professional 300 Watt (per channel) 70 to 80 Watts into 4 Ohms or per channel 40 to 60 Watts into 8 Ohms, light weight 4-channel power amplifier with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of 2.5 sq.mm speaker cable, cross-sectional area 1.5 sq.mm, number of strands 75, size of strands 34, conductor type ATC speaker cable – copper, 2 core, twisted, tin coated, shielded 2.5 sq.mm (70/2) ATC 2C speaker cable 14 AWG with all necessary terminals and connectors.

Supplying, installation, testing and commissioning of 10-channel compact mixing system, 10 input channels (6 mic/line + 4 mic/stereo-line), 2 high-quality editable effects, mic input to master L/R outputs, +16 dBu, typical <0.01% frequency response, -3 dB, ref. 1 kHz, any input to any mixer output 15 Hz to 20 kHz, fader & FX/AUX/MON send attenuation > 75 dB channel to channel < -75 dB CMRR, mic input, 1 kHz > 80 dB, equivalent input noise, mic input, A-weighted, 150 ohms -130 dBu with all necessary terminals and connectors.

Supplying , installation , Testing and Commissioning Cardioid Condenser Gooseneck Microphone with goosenck length of 415mm or more. Flexible gooseneck head for accurate positioning. Shock Mount to be inlcuded with Microphone from same OEM with Frequency Response 70 Hz - 16,000 Hz; It shall be capable of handling sound input levels up to 134 dB with a dynamic range of 106 dB. Nominal open-circuit output voltage shall be 12.0 mV at 1 V, 1 Pascal or better, Signal-to-noise ratio of 66dB,1kHz at 1Pa or better. Support 11V to 52V phantom power for operation. Impedance 100 ohms or better complete with Foam Windscreen with all necessery terminals and Connectors.

Supplying , installation , Testing and Commissioning of MXLR (Male External Line Return) Connectors Pin with all necessery terminals and Connectors.

Supplying , installation , Testing and Commissioning of FXLR (Female External Line Return) Connectors Pin with all necessery terminals and Connectors.

Supplying , installation , Testing and Commissioning of Patch box with 04 connetors options for mic & stage monitor

BSTUPTS

BSPUPTS

CGHCB

CHiPS

CGMSC

CGPHC

CGRBEKVN

CSIDC

CGSMB

CGMFPFED

CGSPDCL

CGSPGCL

CGSPTCL

CGSWC

CGTBC

DBUPTS

KRBAUPTS

KRYAUPTS

RIGUPTS

RUPTS

RNDGUPTS

SUPTS

hectare

joint

litre

Man-Month

meter

metre

one RCC jaali tree guard

one RCC jaali tree guard

P.cumt.

P.Pair

P.Point

p.sq.mtr

P/sq.Mt.

per cm height per letter

per cm height per letter

per cubic centimeter

Per Km.

per letter

Per mtr

per pouch

per test

per tonne

per tonne capacity

per.mtr

Point

quintal

Roll_UD

SHEET

Sq.mtr

Tonne