REPAIR REPLACEMENT AND IMPROVEMENT OF LT CONTROL PANEL LT PANEL LT UG CABLE AND REPLACEMENT OF DEFECTIVE MCCB TIMER SWITCH DISPLAY BOARD AND OTHER MISC WORK AT MD ACCN AREA NAD NON EXPLOSIVE AREA AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 02 jobs as under:- JOB (A) : TPP 2024-2025 Ser No. 74 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Excavation in trenches n.exc 1.5mtr wide and not exceeding 1.5mtr depth and getting out in any type of soil complete all as specified and directed.

Returning and filling in of excavated soil including spreading,levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed..

Removal of surplus soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed..

M&L for Sand cushioning/sand covering for underground cable protection complete all as specified and directed. Note: Punned thickness shall be measured and paid.

Supply and laying sub class 'B' bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

M&L for GI pipe light grade 50 mm dia for cable protection on road crossings /plinth protection/ lamps post etc with fixed to the pole wall etc. suitable fittings for cable protection complete all as specified and directed.

M&L for GI pipe light grade 80 mm dia for cable protection on road crossings /plinth protection/ lamps post etc with fixed to the pole wall etc. suitable fittings for cable protection complete all as specified and directed.

Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable complete all as specified and directed.

M&L for PCC type C2, 1:3:6 using (40 mm gradded stone aggregate) in foundations complete all as specified & directed.

Supply & Laying in replacement in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 3.5/4 core XLPE , armoured, electric power cables (heavy duty) with aluminium conductor of the following size :-

25 Sqmm 4 core

35 Sqmm 3.5 core

50 Sqmm 3.5 core

70 Sqmm 3.5 core

95 Sqmm 3.5 core

120 Sqmm 3.5 core

150 Sqmm 3.5 core

185 Sqmm 3.5 core

240 Sqmm 3.5 core

300 Sqmm 3.5 core

400 Sqmm 3.5 core

S&F in repairs ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Fixed type) of capacity 800 Amps complete all as specified and directed.

S&F in repairs ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Fixed type) of capacity 630 Amps complete all as specified and directed.

S&F in repairs MCCBs of following current carrying capacity complete all as specified and directed :-

3 Pole, MCCB, 400 Amps, Adjustable type,415V, 36KA rating

3 Pole, MCCB, 250 Amps, Adjustable type, 415 V, 36KA rating

3 Pole, MCCB, 200 Amps, Adjustable type, 415 V, 36KA rating

3 Pole, MCCB, 160 Amps, Adjustable type, 415 V, 36KA rating

3 Pole, MCCB, 125 Amps, Adjustable type, 415 V, 16KA rating

3 Pole, MCCB, 100 Amps, Adjustable type, 415 V, 16KA rating

4 Pole, MCCB, 630 Amps, 415 V, Microprocessor release with breaking capacity 50 KA

4 Pole, MCCB, 400 Amps, 415 V, Microprocessor release with breaking capacity 36 KA

4 Pole, MCCB, 250 Amps, 415 V, Microprocessor release with breaking capacity 36 KA

4 Pole, MCCB, 200Amps, 415 V, Adjustable type with breaking capacity 36 KA

4 Pole, MCCB , 160 Amps, 415 V, Microprocessor release with breaking capacity 36 KA, 160 A rated

4 Pole, MCCB, 160 Amps , 415 V, Adjustable type with breaking capacity 36 KA

S&F in repairs Isolator 415 Volts of following current carrying capacity complete all as specified and directed:-

4 Pole 63 Amps

4 Pole 100 Amps

TPN 63 Amps

TPN 100 Amps

M&L for detecting LT UG cable faults located in any stretch/ depth with sophisticated cable fault locator consisting of microprocessor based pre-locator system, HV surge generator, fault pin point surge wave reciever, cable indentification instrument , cable tracer for exact location of under ground cable routes. Note: (i) The rate quoted deemed to be inclusive of transportation of equipment and charges for service engineer . (ii) The fault locator will be arranged by Contractor Only

M&L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conductor cable of size 3.5/ 4 core 25 to 50 sq.mm complete all as specified and directed.

All as per BOQ Serial Item No.1.43 above but for cable of size 3.5 core 95 to 120 sq.mm.

All as per BOQ Serial Item No.1.43 above but for cable of size 3.5 core 150 to 185 sq.mm.

All as per BOQ Serial Item No.1.43 above but for cable of size 3.5 core 240 to 300 sq.mm.

All as per BOQ Serial Item No.1.43 above but for cable of size 3.5 core 400 sq.mm.

M&L for heat shrinkable Termination Kit (with colour limbs of Red, Yelllow, Blue & Black) for LT UG cable complete for making serviceable for aluminium conductor cable of size 3.5/ 4 core 50 to 95 sq.mm compete all as specified and directed

All as per BOQ Serial item No 1.48 above but for cable of size 3.5 core 120 to 185 sq.mm.

All as per BOQ Serial item No 1.48 above but for cable of size 3.5 core 240 to 300 sq.mm.

All as per BOQ Serial item No 1.48 above but for cable of size 3.5 core 400 sq.mm.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 32 x 6mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate), "mild steel angle iron frame" made out of MS angle iron of size 40x 40 x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering 40mm dia light grade, GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical "plate No '3' and connected to earthing test point all as specified and indicated including testing on completion including retrieving old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed. Note : (i) The unit rate includes for protection pipe and GI strip from top of earth plate up to 7.5 meter above ground level and also the cost of the Test point. (ii) Joining of GI earth strip with pipe of the test point shall be done by using suitable cable lugs.

S&F in repairs LED indicating lamp of 230 volts AC to show R, Y & B phase with RED, YELLOW and BLUE in colour complete all as specified and directed.

S&F in repairs current transformer of CT ratio 100/5A to different capacity LT Panels complete all as specified and directed.

S&F in repairs digital multifunctional meter having LCD displays showing single and three phase current and voltages for different capacity of LT Panels complete all as specified and directed.

M&L for maintenance of LT panels by providing necessary hinges, nuts & bolts, welding and painting at site to electric control panel/LT Panel/Feeder Piller box /Bus bar panel any type and any size of E/M installations by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of panel and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer complete all as specified and directed.

M&L Glow sign board 3mm Acrylic shut and 1.25 inch molded LED letter for writting of " GARRISON ENGINEER (NW) KARANJA 22 KV ELECTRIC SUB STATION - " MANGERA " with one side MES logo and another side Div sign on board complete with support frame of 3mm aluminium composite panel with 1" x 1.5" alumnium pipe complete with fixing on wall surface by using of MS clamp Nut, bolt ,anchor fastioner etc complete all as specified and directed

M&L Glow sign board 3mm Acrylic shut and 1.25 inch molded LED letter for writting on both sides " GARRISON ENGINEER (NW) KARANJA 22 KV ELECTRIC SUB STATION - " NAD PH " with one side MES logo and another side Div sign on board complete with support frame of 3mm aluminium composite panel. The dimensions of the board are 5.87m x 0.61m with alumnium pipe complete, fixing on gate pipes using hollow pipes fixed with the board by using of MS clamp Nut, bolt ,anchor fastioner etc complete all as specified and directed

M&L Glow sign board 3mm Acrylic shut and 1.25 inch molded LED letter for writting of " GARRISON ENGINEER (NW) KARANJA 22 KV ELECTRIC SUB STATION - " B " with one side MES logo and another side Div sign on board complete with support frame of 3mm aluminium composite panel with 1" x 1.5" alumnium pipe complete with fixing on wall surface by using of MS clamp Nut, bolt ,anchor fastioner etc complete all as specified and directed

M.K Enterprises (BID ID -3083898)

R A Electric Co. (BID ID -3077669)

LAXMI ENTERPRISES (BID ID -3089447)

ELECTRO ASSOCIATES (BID ID -3082298)

S.P.TRADERS (BID ID -3088143)

BRICKS ON CLOUD INFRA (BID ID -3089686)

D.N.PATIL (BID ID -3080348)