Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹17.3 L
Closing Date
21 Oct 2026, 5:00 pm
Karnataka Power Corporation Limited
Ashok Kumar H
Drilling & grouting to body of Talakalale dam including reaming of body & foundation drains.
KPCL/2026-27/DA/WORK_INDENT4815
KPCL/2026-27/DA/WORK_INDENT4815
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KPCL Chief Engineer CD office Bengaluru
Work experience certificate (To satisfy the eligibility criteria as per clause No.3.2(b) & (c)
Annual financial turnover certificate (Along with profit & Loss and balance sheet), (To satisfy the eligibility criteria as per clause No.3.2(a))
Registered KPWD contractor or equivalent to KPWD Class I contractor registered in Karnataka / Central Government and above or Registered firms / Companies / any under taking companies / individuals are eligible to apply. As a proof of this the intended bidder must upload the relevant documents.
Income Tax PAN
Valid GST registration certificate
PF Registration certificate (Independent PF Code)
Declarations (Shall be furnished duly signed)
Machineries (To satisfy the eligibility criteria as per clause No.3.3(a))
Liquid assets/Credit lines/ letter of credit/ certificates from nationalized banks. (To satisfy the eligibility criteria as per clause No.3.3(b))
Tender Capacity (To satisfy the eligibility criteria as per clause No.3.5)
Power of Attorney (attested by a notary public) for signing the document in the case of firm in partnership/limited company/PSU
Details of personnel
Partnership deed/ JV/Consortium agreement /MOU, Articles of Association etc., along with Power of Attorney.
₹7,500
₹17.3 L
19 Sept 2026
19 Sept 2026
23 Oct 2026
29 Sept 2026
1 Oct 2026
Drilling & grouting to body of Talakalale dam including reaming of body & foundation drains.
Under water identification of suction points, chipping / raking to the required depth, cleaning of joints by brushing / using pneumatic tools, filling of sand particles, fixing of nipples for grouting...
Colour video monitoring wherever directed including covering all activities viz chipping / raking to the required depth, cleaning of joints by brushing using pneumatic tools and underwater plugging of...
Drilling 40 mm to 50 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges, including cement grouting and redri...
Drilling 40 mm to 50 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges, including cement grouting and redri...
Drilling 40 mm to 50 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges including cement grouting and redril...
Drilling 40 mm to 50 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges including cement grouting and redril...
Drilling 76 mm dia (NX) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, coll...
Drilling 76 mm dia (NX) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, coll...
Drilling 76 mm dia (NX) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, coll...
Drilling 75 mm to 80 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges, including cement grouting and redri...
Drilling 75 mm to 80 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges including cement grouting and redril...
Drilling 75 mm to 80 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges including cement grouting and redril...
Drilling 75 mm to 80 mm diameter holes (non coring) by rotary method in rock, masonry or concrete including cost of all materials, machinery, labour, water charges including cement grouting and redril...
Flushing grout holes of all sizes with water and air jets alternatively for an average period of 30 minutes and observing water intake after flushing including cost of all materials, machinery, labour...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Conducting water loss in hard strata using necessary packers in stages of upto 8 m at three desired pressure ranges including saturation for not less than 24hrs and cost of all materials, machinery, l...
Grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machinery, labour, red...
Grouting with cement mortar 1:1 proportion by weight using pneumatic grout pump through grout holes under pressure using clean & approved sand including cost of all materials, machinery, caulking of g...
Providing and fixing up-heaval gauge with all accessories as per specifications. excluding cost of drilling holes including cost of all other materials, machinery, labour, equipments and all other anc...
Reaming / re-drilling of NX size hole for body drains from dam top in downward direction including cost of materials, machinery, labours, water charges etc., as directed by Engineer in charge.
Reaming / re-drilling of NX size hole for body drains from drainage gallery from upward direction including cost of materials, machinery, labours, water charges etc., as directed by Engineer in charge...
Reaming / re-drilling of NX size hole in gallery foundation drain in downward direction including cost of materials, machinery, labours, water charges etc., (for Dam and Allied works) as directed by E...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 1.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .