Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 LAdmitted-Fee/PreQual/Technical/Finance | ₹1.0 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.4 L+₹38,945.90 (38.3%)Admitted-Fee/PreQual/Technical/Finance | ₹1.4 L+₹38,945.90 (38.3%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹1.4 L+₹41,878.20 (41.2%)Admitted-Fee/PreQual/Technical/Finance | ₹1.4 L+₹41,878.20 (41.2%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | N NALLATHAMBI L3 | N K MARI L2 | BOSE AGENCY L1 |
|---|---|---|---|---|---|---|
| 1.01 | Supply and delivery of 20W LED system made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65, Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9, System efficacy > 85. Operating Voltage range of 120V to 270V with surge arrestor minimum of 1 KV. Driver Current not than 700mA. THD < 10% Lumens package not less 105 lm /W for LED Source. Test Certificate from NABL ( National Accredited Board for Testing & Calibration laboratory) for LM79 Report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hours etc., Street light fitting with atleast 300mm length of 3 core 1sq.mm copper cable and Male connector IP66 rated 3pin connector shall be complitable with the female connector used in the SPD and Bi-metal connector and shall be specified in this document complete as per standard Specification (Need to get a DMA Approved 3rd party Testing Certificate) | 35 | No | 2,200 ₹77,000 | 2,156 ₹75,460 | 1,200 ₹42,000 Lowest |
| 2.01 | Supply and Delivery of 1.2 meter Length , 32mm dia GI Bracket suitable for the LED fittings for 20W with 2 sets of GI clamps and necessary bolts and nuts | 35 | No | 667 ₹23,345 | 653 ₹22,855 Lowest | 680 ₹23,800 |
| 3.01 | Labour charges for fixing of 20W LED fittings | 35 | No | 341 ₹11,935 | 334 ₹11,690 | 300 ₹10,500 Lowest |
| 4.01 | Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 2 meters with 2 Nos of bimetal hook connector in one end and IP 66 Female connector in the other end suitable to connect with Male connector in the LED fittings as per technical specification ( New lights and Existing lights) | 35 | No | 266 ₹9,310 | 260 ₹9,100 Lowest | 280 ₹9,800 |
| 5.01 | Add GST 18% | 1 | GST | 21,886.2 ₹21,886.2 | 21,438.9 ₹21,438.9 | 15,498 ₹15,498 Lowest |
Tender Value
₹1.4 L
EMD Value
₹1,435
Closing Date
28 Aug 2026, 3:00 pmClosed
The Commissioner Madurai Corporation
Aringar Anna Maligai, Thallakulam, Madurai.
To Providing New street light through TANGEDCO at Malligai Kudiyiruppu, Kamaraj Nagar om sri sai Vidukal Base 7 ward No 100.
2026_MAWS_693906_1
E4/Est No 6329/25
Open Tender
Civil Works
Lump-sum
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹1,435
28 Aug 2026
14 Aug 2026
28 Aug 2026
14 Aug 2026
28 Aug 2026
14 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Supply and delivery of 20W LED system made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65, Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9, System efficacy > 85. Operating Voltage range of 120V to 270V with surge arrestor minimum of 1 KV. Driver Current not than 700mA. THD < 10% Lumens package not less 105 lm /W for LED Source. Test Certificate from NABL ( National Accredited Board for Testing & Calibration laboratory) for LM79 Report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hours etc., Street light fitting with atleast 300mm length of 3 core 1sq.mm copper cable and Male connector IP66 rated 3pin connector shall be complitable with the female connector used in the SPD and Bi-metal connector and shall be specified in this document complete as per standard Specification (Need to get a DMA Approved 3rd party Testing Certificate) | 35 | No | - | - |
| 2.01 | Supply and Delivery of 1.2 meter Length , 32mm dia GI Bracket suitable for the LED fittings for 20W with 2 sets of GI clamps and necessary bolts and nuts | 35 | No | - | - |
| 3.01 | Labour charges for fixing of 20W LED fittings | 35 | No | - | - |
| 4.01 | Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 2 meters with 2 Nos of bimetal hook connector in one end and IP 66 Female connector in the other end suitable to connect with Male connector in the LED fittings as per technical specification ( New lights and Existing lights) | 35 | No | - | - |
| 5.01 | Add GST 18% | 1 | GST | - | - |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.65 MB
updoc.pdf
Tender Documents • 0.86 MB
BOQ_834260.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .