Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹9.4 LAdmitted-Finance ASHIRWAD H NO 481 FF1 PART VIDHYA ENCLAVE VOLANT BETIM ALTO PORVORIM BARDEZ GOA | NORTH GOA | GOA | 403001 | +4.90% | ₹9.4 L | L1 | Admitted-Finance |
| 2 | L2₹9.8 L+₹36,843.75 (3.91%)Admitted-Finance FLAT NO T 1 H NO 1216 T 1 SAMRUDDHI SQUARE SALVADOR DO MUNDO ALTO TORDA BARDEZ GOA | NORTH GOA | GOA | 403529 | +9.00% | ₹9.8 L+₹36,843.75 (3.91%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical PLOT NO 389 HOUSING BOARD COLONY HARVALEM SANQUELIM GOA 403505 | SANQUELIM | NORTH GOA | GOA | 403505 | - | - | - | Rejected-Technical Not fulfilled the criteria as per the tender notice for class and category of contractor hence rejected |
Tender Value
₹9.0 L
EMD Value
₹17,972
Closing Date
13 Aug 2026, 3:00 pmClosed
O/o Executive Engineer WD III DDW Bicholim Goa
O/o Executive Engineer WD III DDW Bicholim Goa
Urgent Replacement of existing NRV and sluice valves at 5 7 MLD jackwell at Dattawadi
2026_DDW_30899_1
DDW/D.III/10-4-E/ 07/2026-27-03 Date 05/08 /2026
Open Tender
Civil Works - Water Works
Works
30 days
at 5 7 MLD jackwell at Dattawadi
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹17,972
26 Aug 2026
6 Aug 2026
14 Aug 2026
6 Aug 2026
13 Aug 2026
6 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Steel single door swing check type Reflux (nonreturn) valve having body bonnet in HINGE IN GRADED Cast steel i.e. ASTM A 216 Gr WCB faced with 13% CR steel. Spindle, gland sleeve SG iron, body studs. ASTM A 193 Gr. B7, body bolts ASTM A 194 Gr 2H, Gasket in metallic spiral wound AISI 304 with graphite in the construction and testing of the valves will be as per BS 1868 & BS 6755 part I respectively. Flanged ends without bypass arrangements flanges drilled to IS 1538 table 4&6 or ANSI B 16.50 as per the requirement. Class 150 (Class A); Dia in mm 200 of Kirloskar make | - | Each | - | - |
| 2 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel double flanged manually operated sluice valve/ gate valve having body, bonnet in cast steel ASTM A 216 Gr WCB, wedge and steel ring in cast steel ASTM A-216 Gr. WCB with 13% CRsteel, inside screw rising stem in stainless AISI 410 spindle, bonnet brush and gland brush in stainless steel ASTM A 479 Gr 410, bonnet stud in alloy steel ASTM A 193 Gr B 7, and gasket of metallic spiral wound inAISI 304 with graphite filled in. The construction and testing of valve will be as per applicable requirements of API 600 & 589 respectively. Flanges drilled to IS 1568, table 4&6 or ANSI 16.50 as per requirements. Class 150 (Class A) Dia in mm;200 of kirloskar make | - | Each | - | - |
| 3 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685- 1971 CLASS I Nominal diameter in mm.;200 | - | Each | - | - |
| 4 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts, as directed by the Engineer in-charge. Nominal diameter in mm.;200 | - | Each | - | - |
| 5 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Steel single door swing check type Reflux (nonreturn) valve having body bonnet in HINGE IN GRADED Cast steel i.e. ASTM A 216 Gr WCB faced with 13% CR steel. Spindle, gland sleeve SG iron, body studs. ASTM A 193 Gr. B7, body bolts ASTM A 194 Gr 2H, Gasket in metallic spiral wound AISI 304 with graphite in the construction and testing of the valves will be as per BS 1868 & BS 6755 part I respectively. Flanged ends without bypass arrangements flanges drilled to IS 1538 table 4&6 or ANSI B 16.50 as per the requirement. Class 150 (Class A) Dia in mm;250 of kirloskar make | - | Each | 0.29 | - |
| 6 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast steel double flanged manually operated sluice valve/ gate valve having body, bonnet in cast steel ASTM A 216 Gr WCB, wedge and steel ring in cast steel ASTM A-216 Gr. WCB with 13% CRsteel, inside screw rising stem in stainless AISI 410 spindle, bonnet brush and gland brush in stainless steel ASTM A 479 Gr 410, bonnet stud in alloy steel ASTM A 193 Gr B 7, and gasket of metallic spiral wound inAISI 304 with graphite filled in. The construction and testing of valve will be as per applicable requirements of API 600 & 589 respectively. Flanges drilled to IS 1568, table 4&6 or ANSI 16.50 as per requirements. Class 150 (Class A) Dia in mm.;250 of Kirloskar make | - | Each | 0.29 | - |
| 7 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685- 1971 CLASS I Nominal diameter in mm.250 | - | Each | - | - |
| 8 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts, as directed by the Engineer in-charge. Nominal diameter in mm.250 | - | Each | - | - |
| 9 | Dismanteling & removal of existing NRV and sluice valve of diameter 200mm & 250 mm | - | job | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tendernotice_2.pdf
PDF • 0.35 MB
BOQ_31300.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .