improvement of Shanthaveri gopala gowda rangamandira at soppugudde, town panachayath thirthahalli.

improvement of Shanthaveri gopala gowda rangamandira at soppugudde, town panachayath thirthahalli.

Dismantling doors, windows and clerestory windows (steel or wood) shutterincluding chowkhats, architrave, holdfasts etc. complete and stackingto the appropriate disposal area as per direction of Engin...

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after tho...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing and fixing double glazed hermetically sealed glazing in aluminiumwindows, ventilators and partition etc. with 6 mm thick clear floatglass both side, having 12 mm air gap, including providing...

Providing Brick work with common burnt clay modular bricks of classdesignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, scaf...

Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and atop layer 6 mm thick cement plaster with cement mortar 1:3 (1 c...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions andcorners, all necessary fittings complete, including applying a priming...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembledincluding making plaster groves (excluding cost of cement concrete an...

Providing and fixing in position fully panelled Mathi/Nandi wood shuttersfor doors with stiles and rails of 40mm. thick with bottom and lock rails180mm wide top rail and stiles 100mm wide as per drawi...

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete....

Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketso...

Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prel...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10mm(P.N0.117/12.76.12/ CSR/Volume-2/2023-24)

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and

threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the sam...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(P.N0.119/13.12/ CSR/Volume-2/2023-24)

Providing and fixing plain rolled glass 3mm thick with teakwood beading of 10mm thick.(P.N0.183/20.106/ CSR/Volume-2/2023-24)

Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dus...

Providing and fixing plywood 4 mm thick, one side decorative veneer

conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface wit...