Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC GATE NO 1 RAKHAIJUNGLE KHARAGPUR DISTT PASCHIM MIDNIPUR WEST BENGAL PIN 721303 | KHARAGPUR | PASCHIM MIDNIPUR | WEST BENGAL | 721303 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹24.4 L+₹2.4 L (11.1%)Rejected-Finance | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹24.8 L+₹2.9 L (13.3%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹25.1 L+₹3.2 L (14.4%)Rejected-Finance | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹25.4 L+₹3.5 L (15.8%)Rejected-Finance | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR VIPIN BHATT GE
GE (AF) Kalaikunda PO Kalaikunda Air Field Dist Paschim Medinipore St West Bengal Pin 721303
DAY TO DAY MAINTENANCE OF B/R SERVICES AND OTHER MISC B/R REPAIR IN CAMP-II AND SV AND ADJOING AREA AT AF STN KALAIKUNDA
2022_MES_533981_1
8771/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF KALAIKUNDA
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF KALAIKUNDA
₹40,000
Yes
24 Aug 2022
27 Jun 2022
22 Jul 2022
27 Jun 2022
21 Jul 2022
11 Jul 2022
Amount
Resecuring or easing and adjusting without taking down shutter of any description of wooden joinery the following sizes complete all as specified and directed :
Not exceeding 1 Sqm each complete all as specified and directed
Exceeding 1 Sqm but n.exc 2 Sqm each complete all as specified and directed
Exceeding 2 Sqm each complete all as specified and directed
Taking down and refixing of shutter of any description in same opening complete for the following size complete all as specified and directed Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc. Hardware items will be paid at supply only rates except screws and nails Note: screws , nails and other fitting required shall be inclusive in quoated rates.
Not exceeding 1 Sqm each complete all as specified and directed.
Exceeding 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Exceeding 2 Sqm each complete all as specified and directed
Supply only following Hardwares complete all as specified
150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified
150 mm long Aluminium anozied barrel tower bolt of extruded section complete all as specified
250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified
250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified
100mm long Butt hinges, medium weight, cold rolled mild steel fixed with screw complete all as specified
100mm long Butt hinges, medium weight, cold rolled mild steel fixed with necessary welding complete all as specified
75mm long Butt hinges, medium weight, cold rolled mild steel complete all as specified
75mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised Type C-21 complete all as specified
40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified
300 mm long Mild steel tee hinges, stove enamelled black, medium type complete all as specified
150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified
150mm long aluminium handles, cast type, anodised complete all as specified
100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified
S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.
S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed.
S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ccomplete all as specified and directed.
Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from frame including providing wooden beads painted with two coat of enamel paint over a coat of primer complete all as specified and directed.
S & F 3mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery with and including hacking out old broken glass (any thickness, size, quality or description) from frame including providing wooden beads painted with two coat of enamel paint over a coat of primer complete all as specified and directed.
M & L Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, spring wire glazing spring clips, painting/oiling one coat on rebates, grooves, reputtying and finally one coat synthetic enemal paint over puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed
Taking down and refixing of pelmet boxes incl new fixtures and fittings (incl nut bolts & steel patti ) complete all as specified and directed
S & F 20mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, with and inclding new brackets and fixed to wall complete all as specified and directed.
S & F in repairs stainless steel bracket and holders for 25 mm dia curtain rod, made out of stainless steel sheet of grade X02Cr19NilO (304 S2), surface finish No. 4 as per IS 6911: 1992 complete all as specified and as directed.
Supplying & fixing to floor, walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.
Supplying & fixing to floor, walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.
S&F in repairs PVC tank cover with locking arrangement for 500 ltrs to 1000ltr capacity of approved make complete all as specified & as directed.
S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
S&F in repairs pillar taps 15mm dia, half turn, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified & as directed. (Cat Part No. 1010 of Marc or equivalent of Jaquar)
S & F in repairs 15 mm nominal size, nonrising spindle type fancy stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
S&F in repair 15mm size bib tap standard of PTMT any colour long body high pressure screwed for iron pipe and fixed (minimum weight 15mm – 90 gms) complete all as specified & as directed.
S & F in repair 15 mm bore PTMT Pillar taps of any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 15 mm -110 gms) complete all as specified & as directed.
S & F in repair 15 mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed with and including wall flange complete all as specified and as directed. (Minimum weight 15 mm-90 gms) complete all as specified & as directed.
Supply and fixing of Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete including jointing with solvent cement, all as specified & as directed.
S & F in repair of swivel shower of PTMT any coloured for fixing with 15 mm pipe complete all as specified and as directed. (Minimum weight 40 gms) complete all as specified & as directed.
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & as directed.
Fixing only in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Note: Spare part are required to be replaced deemed to be included in quoated rates
Repairs to stop cock, bib tap, Pillar tap.gate valve and float valve etc with washers, jute complete all as specified and as directed Note: Spare part are required to be replaced deemed to be included in quoated rates
S & F in repair of peg stay 300 mm long with 3/4 holes stove enameled black suitable for existing steel windows including nut/bolts complete all as specified and as directed.
S & F in repair of steel window handles, left/right stove enameled black with nut bolt & washers complete all as specified and as directed.
M & L for cutting out old unserviceable steel hinges for ventilator/window and supply and fixing steel hinges shutter suitable for top hung shutter by welding and functioning smooth by greasing etc incl. two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed.
M & L for cutting out old unserviceable steel hinges from old steel windows in position and provision of new steel hinges on side welded (Spot) to face of the shutter made with electro galvanized, pin projecting type not less than 65 mm and not more than 75 mm wide and other side is welded to steel frame of suitable thickness and functioning smooth by greasing etc and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S & F in repairs concealed nipple 15/20mm dia complete all as specified and as directed.
S & F in repairs hook and eyes for gate and shutter 75mm size of mild steel wire type-I complete all as specified and as directed.
S & F in repairs of 32 mm bore waste coupling of PTMT(half or full threaded) completed all as specified and as directed. (Minimum weight 45gms)
S & F in repairs of 40 mm bore waste coupling of PTMT(half or full threaded) completed all as specified and as directed. (Minimum weight 60 gms)
S & F flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.
S & F flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, laid in trenches complete all as specified and directed by Engineer- in- charge .
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and directed by Engineer- in- charge .
S & F UPVC bends without inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge
S & F UPVC bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) bends of any radius. complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y'/'T') equal or unequal without access door complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y'/'T') equal or unequal without access door complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge
S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed
S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed
S & F in repairs Towel Rail 450 mm long of PTMT fixed with and including Chromium plated brass screws and wooded/plastic cleats complete all as specified and as directed. (Minimum weight 170 gms) complete all as specified and directed
S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs vitreous china squatting pan, 'Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses complete all as specified and as directed by Engineer-in-Charge.
S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 Quality B complete all as specified and directed by Engineer-in-charge.
M&L for welding in repairs n.exe 2.5 cm in length on metals to be welded n.exc. 6 mm thick each in any height of structure complete all as specified and directed by Engineer-in-charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L for glazed, colour ceramic wall tiles (group B III), area of each tile exceeding 0.04 sqm but not exceeding 0.12 sqm, length less than 340 mm, minimum 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed.
M & L for non skid, rectified, colour ceramic floor tiles (group B II), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, length more than 460 mm but less than 700 mm, minimum 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:4) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.
M & L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
All as per item no 60 above but except bricks complete all as specified and as directed.
M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound will be measured and paid for separately.
Supply only liquid water proofing compound.
M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distemper over a coat of primer on walls complete all as specified and as directed.
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on the wall all as specified and directed
All as per item No : 70 above but for ceiling surfaces complete all as specified and as directed.
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat acrylic distemper on old surfaces complete all as specified Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty)
All as per item No : 72 here in before but on ceiling surfaces omplete all as specified Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty)
M&L for complete removal of existing treatment from walls, and applying two coats acrylic distemper on walls,over and including a coat of 3 mm thick white wall care putty premium quality over and including a coat of primer old plastered or unplastered surfaces on walls plastered or unplastered surfaces on walls complete all as specified and as directed.Make;Berger (Bison) /J&N(Jensolin) /Asain Piants(Tractor)/ Nerolac (Beauty)
M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level)
M & L for cement concrete M10 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge.
M&L for 40mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in sub floor, sub bases, floors and pavings etc complete all as specified.
S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.
Dismantling water tank and removing to store of capacity exc. 250 litres but not exc. 500 litres.
S & F rotational moulded polyethylene multi- layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
S&F in repairs PVC ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed .
M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 500 ltrs & upto 1000 ltrs capacity complete all as specified & as directed.
Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of elastomeric bituminous coating system based on bituminous emulsion, polymer and additive conforming to ASTM C 836 (“Dr. Fixit Solyseal" or equivalent of M/s Fosroc, M/s STP Limited) over the substrate including application of one coat of primer (solyseal 1 : water 1) followed by two coats of solyseal applied @ 0.90 kg/sqm/coat sandwiched with open woven glass fibre of mesh 2 mm X 2 mm or PE based spun bound fabric of 40 gsm complete as per manufacturer specification in sunken portion with and including sunken floor shall be filled with PCC 1:3:6 as per existing thickness complete all as specified.
Rate quoated above items item no.01 to 86 here in before inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as Graduate in any discipline with minimum one year certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least thrice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Implementation of Bio-metric system for attendance of supervisors and workers, deployed by the contractor.. (iiii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department.
Kalpana Traders
M/S Jamuna Traders
SHARMA ENTERPRISES
JEETEN ENTERPRISE
SNEHANGI TRADERS
M/S Tapan Sur
Ganguly Construction
Guru Charan Mahata
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .