CA NO CWE/CHM-92/2020-21 CERTAIN REPAIR TO PARAPETS, RCC PROJECTIONS, ROOF TREATMENT, INTERNAL ELECTRIFICATION, MISC B/R E/M REPAIR INCLUDING IMPROVEMENT OF JCOS/OR MD ACCN IN

Amount

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (Whether full thickness removed or only a part thereof) with and including removal of any existing treatment and removal of all debris/surplus material and soil etc out side MoD land and deposited in the space earmarked by local administrative auth complete all as specified and directed.

M&L for RMC (low density thermal insulative concrete of density 1200 kg/Cum) 1:2:4 type B-1 obtained from RMC plant listed with MES as in roofs, terraces, sunkens and in other locations as per site requirement laid all as per manufactur's instructions including form works complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over roof slab finished even and fair mixed with water proofing compound complete all as specified. (WPC shall be measured as paid seperately under related items).

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

M&L for wire brushing and cleaning top surface, terracing or cement concrete, including flashings and junction of parapets, etc, M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/Sqm) laid on primed surface by torch application with and including primer complete all as specified complete all as directed.

Material and labour for 40mm thick brick tiles laid on 15mm thick screed bed in CM 1:4 and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement complete all as specified and directed.

All as per serial item No 6 here-in-before but except tiles -ditto- Note. Serviceable tiles retrived against item No 01 here-in-before shall be reused after proper cleaning).

M&L for raking out joints in brick tiles laid flat in roof etc and flush pointing in cement and mortar (1:3) complete all as specified and directed.

Supply and fixing PVC 100 mm dia bore spout pipe 600mm long and embedded in PCC 1:2:4 B0 using 12.5 mm aggregate type at bottom slab level as per site requirement complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with necessary joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm as per SSR Part -I including nuts bolts etc, fixed as in repair with and including taking out old pipes complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bend any radius, fixed as in repair complete all as specified and directed.

Blank

Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, benching, roof kerbs , rounded or chamfered on edges or on parapets on roof top finished even and smooth without using extra cement with and including demolition of old concrete and removal of debris up to a distance of 1.50 KM and providing all necessary form work/scaffolding as per site requirement and carriage of all material complete all as specified and directed

Supply and fixing cover Lid for PVC water storage tanks (500/1000 Ltrs capacity) as per site requirement fixed with all necessary assesories in repair complete all as specified and directed.

Demolition/ Dismantling completely existing cemented water storage tanks of any capacity on roof top or at any position and supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, float valve of 20mm bore fixed with and including reconnecting GI tubings as per site requirement to make it properly functional complete all as specified and directed.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, float valve of 20mm bore fixed in repairs with and including disconnecting & dismantling of existing tanks, removal from site complete all as specified and directed.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, float valve of 20 mm bore fixed as in repairs with and including disconnecting & dismantling of existing tanks, removal from site complete all as specified and directed.

Supply and fixing float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, fixed as in repair complete all as specified and directed. `

Taking down built in Gents/Ladies dressing mirror of size nexc 0.5 sqm with table, cabinets, drawers, shelves, shutter etc. of any description & size and repairing the same by replacing of damaged parts/articles, oiling, greasing, easing and readjusting and re fixing back in original position and making good to match with existing surface of the disturbed portion of wall/masonry/concrete etc complete all as directed.” NOTE : All the replaced new items/parts will be measured and paid separately under respective items.

M&L 12mm thick pre laminated block board, interior grade, pre laminated both side with decorative choice lamination as cabinets, drawers, self, etc., with and including necessary lipping of wood/PVC as per site requirement fixed with nails in repairs complete all as specified and directed.”

S&F 5 mm thick looking glass mirror fixed in existing frame of gents/ladies dressing table with and including all fixing accessories, complete all as specified fixed in repair.

S&F 30mm/40mm size (as per site requirement) continuous (Piano) hinges, mild steel and fixed in repairs, complete all as specified and directed.

S & F 20 mm dia bore anodised MS curtain rod with and including fixing fancy brackets, stops, with and including CP steel screws & PVC rawl plug complete all as specified & directed.

Material and labour for 18-19 mm thick pre laminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, fixed in repair with and including taking down existing shutters of any size and description complete all as specified and directed .

Material and labour for hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate,catcher fixed as in repairs complete all as specified and directed.

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe)with & including connection to trap and flushing pipe complete, set with cement concrete, fixed as in repair, complete all as specified & directed.

Supply and fixing vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed.

Supply and fixing wash hand basin, vitreous china, flat back , white of size 550X400mm with and including CP pillar tap of 15mm bore, PVC waste coupling and waste pipe of suitable size, fixed as in repairs complete with and including necessary brackets of suitable length of MS angle iron 25x25x5mm embedded and grouted in walls firmly with PCC 1:2:4 type B0 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc at any location ie roof ,parapets , walls complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 at any location ie roof ,parapets , walls etc as per site requirement complete all as specified & directed.

All as per serial item No 30 herein before but except bricks (using old serviceable bricks) obtained against item No 29 here-in-before complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement including taking down old cement plaster and removal of debris and removal of debries out site MoD land to the place earmarked by local administration complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement including taking down old cement plaster complete all as specified and directed.

Blank

Material and labour for 5 mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas, facia etc at any position finished even and smooth without using extra cement including taking down old cement plaster with & incl necessary scaffolding and removal of debries out site MoD land to the place earmarked by local administration complete all as specified and directed.

Supply and fixing 20mm dia bore of pipe (concealed or unconcealed) GI tubing medium (as per site requirement) grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 including taking down old tubing complete all as specified and directed.

Supply and fixing for 15mm dia bore (concealed or unconcealed as per site requirement) GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 including taking down old tubing complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in parapets,slabs,chhajjas,facia, beams, columns etc as per site requirement complete all as specified and directed

Use and waste of form work to slabs, beams, facia, lintels, chajjas and similar items including edges/sides and soffits of lintels etc rough finished surface of concrete flat complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and building with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for taking down chowkhats or frame of any description n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frame of any description exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each and refixing in same opening after easing /adjusting complete all as specified & directed.

S&F factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs/hold fasts, hinges, lock strike plate, etc.including filling of PCC 1:3:6 type C0 using 12.5 mm graded stone aggragate as back fill of pressed steel frame (cost of hinges, hold fasts etc and shop coat primer included) complete all as specified & directed.

Supply and fixing pressed steel frame for doors with single rebates of size 105 x 60mm including necessary fixing lugs/hold fasts, hinges, lock strike plate, including filling hollow frame with PCC (1:3:6) type C0 using 12.5 aggregate etc. (thickness sheet is 1.25 mm), (cost of hinges, hold fasts and shop coat primer included), complete all as specified & directed.

Supply and fixing pressed steel frame for doors with single rebates of size 75mmx 50mm including necessary fixing lugs/hold fasts, hinges, lock strike plate, including filling hollow frame with PCC (1:3:6) type C0 using 12.5 aggregate etc. (thickness sheet is 1.25 mm), (cost of hinges, hold fasts shop coat primer included), complete all as specified & directed.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repair with and including taking down existing windows of any size and any description complete all as specified and directed

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repair with and including taking down existing windows of any size and any description complete all as specified & directed

Supply and fixing factory made steel ventilator (Box type) fixed type, dovetailed or welded including one shop coat of red oxide zinc chrome primer, fixed as in repair with and including taking down existing ventilators of any size and any description complete all as specified & directed

S & F for factory made solid PVC moulded door shutter 28 mm to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC Sheet on the front face & 2 mm prelam PVC Sheet on back face with particle board core fixing in frame at site as per specfication & drawing.

Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, water proof shutters all as specified

Supply and Fixing 35mm thick second class hardwood (three panel, divided into sub panels with provn of one vertical rail in full height) glazed and gauged Skelton shutters open rebated & prepared to receive glass, gauge , edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass or net etc including priming coat complete all as specified and directed.

Material and labour for 150mm long aluminum handle cast type anodized complete all as specified.

Material and labour for 150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.

Supply and fixing mild steel sliding door bolt 250mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and directed.

Material and labour for 150mm long mild steel helical door springs including roller and roller plate fixed to angle iron door frame including welding etc, complete all as specified and directed.

Material and labour for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (150mm size), fixed as in repairs complete all as specified and directed.

Supply and fixing galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

Supply and fixing rolled sections as in door, chowkhat / frames and the like fixed with angle cleats and connecting plates, etc. confirming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for framed work such as grills, grating, framed guard bars, walk ways, railings etc using steel conforming Fe-290 Gde E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness) size quality etc from any type of frames fixed with pins, beading or oil putty complete all as specified & directed.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified & directed.

Supply and fixing 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for welding of broken / loose hinges, door closers, handles, helical door springs etc as in position complete all as specified & directed. (Each part such as handle / hinge / closer / spring etc shall be measured and paid separately under respective item.)

Supply and fixing towel rail 600mm long of PTMT fixed with and including necessary screws and wooden / plastic cleats , fixed as in repair complete all as specified and directed.

Supply and fixing 15mm dia bore of pipe PVC connection with PTMT nut, of length 450mm, complete fixed as in repairs all as specified and directed.

Supply and fixing bib tap standard of PTMT, fancy type of any colour high pressure screwed for iron pipe and fixed for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing bib tap,cast copper alloy, chromium plated, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.

Supply and fixing stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed

Supply and fixing PVC (SWR) floor trap 75mm bore, plain with grating incl jointing with solvent cement, set in PCC 1:2:4 type B0 and making good the disturbed surface to match the existing surface, fixed as in repair complete all as specified and directed.

Material and labour for PVC 110mm dia bore of pipe, floor trap with grating including jointing to waste pipe with lead joints set in PCC 1:2:4 type B0 and making good the disturbed surface to match the existing surface, fixed as in repair complete all as specified and directed.

Supply and fixing 32mm dia bore PVC waste pipe, fixed as in repair complete all as specified and directed.

Supply and fixing 32mm dia bore waste coupling / waste fitting of PTMT any colour, fixed as in repair complete all as specified and directed.

Supply and fixing for 15mm dia of bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed.

M & L for looking mirror of size not exceeding 0.30 Sqm each and 3 to 4 mm thick with necessary holes & mounted on PVC ply not less than 4 mm thick fixed on wall with screws and rawl plugs in etc, fixed as in repair, complete all specified.

Supply and fixing chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed

Supply and fixing swivel shower of PTMT any colour with 15mm pipe, with shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT (Minimum weight 40gms ) fixed as in repair complete all as specified and directed.

Material and labour for standard kit of PVC flusing cistern any capacity (internal fittings) for low level PVC flushing cistern of any approved brand fixed as in repairs complete all as specified and directed.

Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia bore PVC long bend for squat pattern/EWC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.

Material and labour for waste fittings chromium plated 40mm size sinks/basins etc with long screw shanks and flynuts, flanges and bedded in red lead cement fixed as in repairs complete all as specified and directed.

Supply and fixing PVC, (SWR) 110mm dia bore, in any length with rubber ring joints, laid in trenches or fixed in walls etc, fixed in repairs complete all as specified and directed.

Supply and fixing soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

Supply and fixing hand jet chromium plated (health faucet) for 15mm bore of pipe with fittings, fixed as in repairs complete all as specified and directed.

Supply and fixing Wash hand Basin brass Mixer of chromium plated, for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed.

Supply and fixing grating (doom type) 100mm dia of PTMT fixed as in repair complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles on vertical surface 300mm x 450mm x 6 to 7mm thick,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old surfaces/tile complete all as specified and directed.

Material and labour for non skid, ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, overand including 15mm thick screed bed in cement mortar 1:6 including dismantling of old tile surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm crushed stone aggregate as in foundations,mass concrete,sub base of floors etc all as specified and directed

Material and labour for 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in sub base/ base for laying tiles thereon, finished even and fair without using extra cement complete all as specified and directed.

Material and labour 14 to 16mm thick baroda green marble stone slabs, width and length as per site requirement, best quality machine cut and granite polished to be fixed on cooking plateform, tread, riser of steps and vertical surfaces etc and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners, in repair where required with and including 15 mm thick screed bed in cement mortar 1:4 where requried complete all as specified and directed.

Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, including demolition of old concrete and complete removal as requried, complete all as specified & directed.

Material and labour for two coats of synthetic enameled paint on steel and iron surface over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new surfaces of any description of walls,facia, ceiling, RCC etc and applying two coats of oil bound distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.

Preparation of new surfaces of any description of walls and applying two coats of exterior emulsion paint @ 5 Sqm/litres over and including one coat of exterior wall primer @11Sqm/litres with and including necessary scaffolding and safety arrangements complete all as specified and directed.

Complete removal of existing treatment of any type/description viz cement base paint,external emulsion etc from plastered or unplastered surfaces of walls,chhajjas,facia,cantilivers,RCC etc with mechanical means/grinder completely and applying two coats of exterior emulsion paint @ 5Sqm/litres over and including one coat of exterior wall primer @11Sqm/litres with and including necessary scaffolding and safety arrangements complete all as specified and directed.

Complete removal of existing treatment of any type/description viz cement base paint,external emulsion etc from plastered or unplastered surfaces of walls,chhajjas,facia,cantilivers,RCC etc with mechanical means/grinder completely and applying two coats of cement base paint @ 5Sqm/litres including necessary scaffolding and safety arrangements complete all as specified and directed.

Complete removal of existing treatment of any type/description viz distemper,white wash etc from walls,facia, ceiling, RCC with mechanical means/grinder completiy and applying two coats of oil bound distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, etc. and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for point wiring with (approved colour coding as pe IS) PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed PVC conduits, sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account) complete all as specified and directed.

All as per item No 104 above but for one socket outlet 3pin, 5 Amps on the same board complete all as specified and directed.

All as per item No 104 abovebut for one socket outlet 3pin, 5 Amps on the independent board complete all as specified and directed.

All as per item No 104 above but for one socket outlet 3 pin, 15 Amps on independent board using cables of size 2.5 sq mm for phase & neutral and 2.5 sq mm as earth wire complete all as specified and directed.

M&L for point wiring with (approved colour code as per IS) PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in existing concealed PVC conduits, and provn of sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account) complete all as specified and directed.

All as per item No 108 above but for one socket outlet 3 pin, 5 Amps on the same board complete all as specified and directed.

All as per item No 108 above but for one socket outlet 3 pin, 5 Amps on the independent board complete all as specified and directed.

All as per item No 108 above but for one socket outlet 3 pin, 15 Amps on independent board using cables of size 2.5 sq mm for phase & neutral and 2.5 sq mm as earth wire complete all as specified and directed.

S & F switch piano flush type, single pole, 230 volt one way , 5 Amps all as specified and directed.

S & F switch piano flush type, single pole, 230 volt one way , 15 Amps all as specified and directed.

S & F Socket out let 2 in 1, 3 pin 5 Amps, ISI marked, 230 Volts compete all as specified.

S & F Socket out let 2 in 1, 5/15 Amps, ISI marked, 230 Volts compete all as specified.

S&F stepped type electronic fan regulator piano flush Type.

S & F Electric bell, AC 230 volt, single pole complete all as specified & directed.

S & F bell push piano type SP 230 volts all as specified and diected.

S & F Ceiling rose 6 Amps three terminals complete all as specified and directed.

S & L Lamp holder PVC insulated body with metal ring including 7 watt LED lamp complete all as specified and directed.

S & F Bulk head fitting in engineering plastic housing with clear prismatic diffuser 10 watt capacity complete all as specified and directed.

S & F LED CRCA box type batten for T8 retrofit LED tube 20 watt with decorative end cap complete with and incl retrofit polycarbonate/glass tube 20 watt capacity 4 feet long & white light and incl connections from ceiling rose complete all as specified and directed. Cat part No LTDC01220WLED/WD Make:- C & S or equivalent make specified in Appx 'B'.

S & F LED CRCA box type batten for T8 retrofit LED tube 10 watt with decorative end cap complete with and incl retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed. Cat part No LTTB2F10WLEDP/W Make:- C & S or equivalent make specified and direc in Appx 'B'.

Disconnecting and Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified.

Sub main wiring (with approved colour coding as per IS) with two single core 6 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core 6 sqmm FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade of earth for earthing. Notes: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) Color code shall be Red for phase, black for neutral and green for earth. (iii) For payment purposes, two runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 running meter"

M & L for disconnection of power supply and taking down all type of MCCB, MCB DB, MCB complete all as specified and directed.

S & F for MCCB 4 pole, 3 phase 415 volts of capacity 100/ 125 Amp, 36 KA with adjustable thermal and magnetic release complete with proper copper thimble all as specified and directed.

S & F vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 100 to 125 Amp & outgoing 4 way having IP 54 protection complete all as specified and directed.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way all as complete all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 Volts having braking capacity 10 KA "C" characterstic all as specified & Directed.Cat part No:-DHMGCSPF006-032 Make:-Havells or equivalent make specified in Appx 'B'.

S & F MCB SPN 40 Amps 240 Volts having braking capacity 10 KA "C" characterstic all as specified & Directed.Cat part No:-DHMGCSNF040 Make:-Havells or equivalent make specified in Appx 'B'.

S & F MCB SP 63 Amps 240 Volts having braking capacity 10 KA "C" characterstic all as specified & directed.

S & F 25mm dia bore, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified and directed.

Cutting chasing in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall all as complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh, CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 (20 mm graded stone aggregate), excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point including testing on completion all specified & as directed. Note:The unit rate including for protection pipe and GI earth wire 4.00 mm dia from top to earth plate up to 7.5 meter.

Supply and fix in repair multipurpose PVC box with 05 Amps multipin socket and 05 Amps switch with necessary connection including taking down old UNSV/rusted box complete and making good the surface as per existing complete all as specified and directed.

Supply and fix in repair with 15 Amps multipin socket and 15 Amps switch with necessary connection including taking down old rusted box complete and making good the surface as per existing complete all as specified and directed.

Supply and fix in replacement casing capping with fixing accessories of size 15mm width complete all as specified and directed.

Supply and fix in replacement casing capping with fixing accessories of size 20mm width complete all as specified and directed.

Supply and fix in replacement casing capping with fixing accessories of size 25mm width complete all as specified and directed.

Supply and fix in replacement machine/black star screws of size 1.5" & 2" with suitable size washer complere all as specified and directed.

Supply and fix in replacement of PVC junction cover circular type with suitable size screws and washers complete all as specified and directed.

Supply and fix in replacement of PVC fan junction cover circular type with suitable size screws and washers complete all as specified and directed.

Taking down old rusted sunken box any type/capacity including cutting/chases and making good to disturb surface all as specified and directed.

Supply and fix of sunken box 2 mm thick 4"x4" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

Supply and fix of sunken box 2 mm thick 6"x4" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

Supply and fix of sunken box 2 mm thick 6"x 6" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

Supply and fix of sunken box 2 mm thick 6"x 8" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

Supply and fix of sunken box 2 mm thick 8"x 8" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

Supply and fix of sunken box 2 mm thick 10"x 8" sincluding cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed.

S & F in repair switch piano flush type, single pole, 230 volt one way , 5 Amps all as specified and directed.

S & F in repair switch piano flush type, single pole, 230 volt one way , 15 Amps all as specified and directed.

S & F in repair socket out let 2 in 1, 3 pin 5 Amps, ISI marked, 230 Volts compete all as specified.

S & F in repair ocket out let 2 in 1, 5/15 Amps, ISI marked, 230 Volts compete all as specified.

S&F in repair stepped type electronic fan regulator switch piano flush Type complete all as specified and directed.

S&F in repair stepped type electronic fan regulator socket piano flush Type complete all as specified and directed.

S & F in repair Electric bell, AC 230 volt, single pole complete all as specified and directed.

S & F in repair bell push piano type SP 230 volts all as specified and diected.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 4"x4" sunken box complete all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 6"x4" sunken box complete all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 6"x 6" sunken box complete all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 6"x 8" sunken box complete all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 8"x 8" sunken box complete all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine scdrew and washers including cutting for switch/socket suitable for 10"x 8" sunken box complete all as specified and directed by Engr-in Charge

S & F decorative wall light fitting high grade poly carbonate housing suitable for and including 5 watt LED retofit lamp, PC diffuser in opal finish glass filled engineering plastic B22d lamp holder with electrical grade copper contact wired upto terminal block, mounting bracket with lugs and screws complete all as specified and direcated. Make:- Havells produt No. CITY-1 LHDL 02160099 or equivalent in specified in Appx 'B'.

S & F surface mounted LED porch down light in engineering plastic housing with clear prismatic diffuser 5 watt capacity white light complete all as specified and directed. Cat Part No CG80B9WLED Make C & S or equivalent.

S & F sheet metal enclosure of size of 900x600x200mm with locking arrangement flush to wall for fixing of 04 Nos energy meter including taking down carefully energy meter with provision of 4 Nos glass 75 x 150mm size in front side for taking meter reading including connection complete all as specified and directed.

Supreme Constructions

aggarwal traders

m/s AR Construction co