SPECIAL REPAIR / REPLACEMENT OF WATER TANKS AT STAGE-III AT AF STN NATHATOP

Amount

SCHEDULE "A" PART-I (E/M ) .

Supply of SMC Ceiling panel size 1000x1000x70 mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-24 )

Supply of SMC Ceiling Bottom panel size 1000x1000x75mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-24 )

Supply of SMC Side/Wall panel Wall size 1000x2000x75mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-20 )

Supply of SMC Ceiling Man hole size 1000x1000x75mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply of SMC Ceiling Drain panel size 1000x1000x75mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply of SMC HDG Corner Frame size 75x75x3x200 CA-20mm complete all as specifed and as directed by Engineer-in-Charge .(Qty-4 )

Supply of SMC HDG FLANGE Reinforced Bar (Plate) Frame size 50x3tx900Lmm complete all as specifed and as directed by Engineer-in-Charge .(Qty-20 )

Supply of SMC Pvc Sealing Tape size 70x3mm complete all as specifed and as directed by Engineer-in-Charge .(Qty -210)

Supply of SMC HDG Steel Nut -Bolt With Two Washers M16X40 L complete all as specifed and as directed by Engineer-in-Charge .(Qty48 )

Supplyof SMC HDG Steel Nut -Bolt With Two Washers M12X40 L complete all as specifed and as directed by Engineer-in-Charge .(Qty-1350 )

Supply of SMC HDG Steel Nut -Bolt With Two Washers1/2"x2.5"L complete all as specifed and as directed by Engineer-in-Charge .(Qty-12 )

Supply of SMC PVC air vent 100mm dia complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply of FRP Internal support pipe ISP-20 1910 MM complete all as specifed and as directed by Engineer-in-Charge .(Qty-16 )

Supply of FRP Internal ladder FIL-20 1860 MM complete all as specifed and as directed by Engineer-in-Charge .(Qty -1)

Supply of Water level indicator LG-20 MM complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply Inlet Set -Flange WITH 9" Nipple 50NB complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply and Connection item Outlet Set -Flange WITH 9" Nipple 100NB complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply and Connection itemDrain Set -Flange WITH 9" Nipple 50NB complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply and Connection itemOver flow Set Tank Joint 50NB complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply of MS item MS External Ladder with Fixing IL-20 2800 MM Long ver floe Set Tank Joint 50NB complete all as specifed and as directed by Engineer-in-Charge .(Qty-1 )

Supply of MS Vertical Post-MC-150X75X2150MM Long P-20 complete all as specifed and as directed by Engineer-in-Charge .(Qty-16)

Supply of MS Tie Rod dia -5/8 inch x5600mm long T-1 complete all as specifed and as directed by Engineer-in-Charge .(Qty-8 )

Supply of MS Cleat Angle-50x6x86mm Long C-1 86 MM Long complete all as specifed and as directed by Engineer-in-Charge .(Qty-16 )

Supply of MS Cleat Angle-50x6x50 mm long C-1 50MM Long complete all as specifed and as directed by Engineer-in-Charge .(Qty-16 )

Supply and placing of position of SMC panel tanks for water storage as conforming with IS 14399:1996 and material conforming as per IS 4249:1967 for fire retardant required capacity of suitable size including fixing and assembling erecting the tank complete as per direction of Engineer in charge the tanks to be leak proof after instalation Connection item HDG Grillage for 50 KL complete all as specifed and as directed by Engineer-in-Charge .(Qty-1)

M&L for valve pit masonery chamber of size 1.2x1.2x.3 mtr with MS plate 2 mm thick top cover locking arrangement 50 mm lock - 01 No Angle iron frame size 40x40x6 including painting with two coat of synthetic enamel paint over a coat of red oxide primer including excavation earth work, PCC plaster etc including taking down and shown on drawing complete all as specifed and as directed by Engineer-in-Charge .

Cutting in position existing steel tubing for alteration or repair including screwing/threading complete all as directed of the following size 80/50/40/25mm and disturb surface will be clear as per exsiting and nothig extra shall be addmissible on this acount. Bidder are requested to quote their rate accordingly.

S&F in repair incluiding taking down sluice valve connection & testing 'ISI marked' both ends flanged and drilled cast iron body class PN-1conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc complete all as specified and directed of the following sizes :-

80 mm bore.

50 mm bore.

40 mm bore.

S&F in replacement gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the following sizes :-

80 mm bore.

50 mm bore.

40 mm bore.

25 mm bore.

S&F in repair GI pipe medium grade (incluiding taking out) with all fittings and fixed complete to wall/ceiling or laid in floor /trenches etc. complete all as specified and directed

80 mm bore.

50 mm bore.

40 mm bore.

25 mm bore.

SCHEDULE "A" PART-II (B/R ) .

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor , Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M & L 100 mm th PCC 1:2:4 type B-1(20 mm graded stone agg) as in, Floors, Paving, etc, finished even and fair without using extra cement complete all as specified.

M & L 200 mm th PCC 1:2:4 type B-2(40 mm graded stone agg) as in, plinth of water puff tanks ,Floors, Paving, etc, finished even and fair without using extra cement complete all as specified.

Forming construction joint 10mm wide and 200mm deep with diamond cutter and filled with sealing compound grade 'A' all as specified and as directed

Forming construction joint 10mm wide and 100mm deep with diamond cutter and filled with sealing compound grade 'A' all as specified and as directed

Forming contraction/Dummy joint 10mm wide and 65mm deep with diamond cutter and filled with sealing compound grade 'A' all as specified and as directed

ANIKET TRADERS

MOHAN LAL AND SONS

ASIA BUILDER