Providing and fixing and commissioning of Additional 1000 KVA Packaged Substation, PSS, HT LT Cables, LT Main Panel,Power Factor panel etc, for Sinchai Bhawan in Building of Irrigation at Sec-5,Panchkula.

METERING PANEL Supply and erection, testing and commissioning of cubical type dust and vermont proof metering panel standing floor mouting suitable for 11 KV 3 Phase supply made out of 14 gauage M.S. sheet with channel iron base frame painted with stroving synthetic light grey enameld paint suitable for operation on 11 KV 3 phase for wire 50 Cycle effectively earthed system and commissioning of the following. Cubical boxes of min. size 700 X 500 as per approved by UHBVNL of 14 SWG M.S. sheet with double door opening 1 for energy meter and another for CT andf PT with 11 KV resin cast bushing. 3 Nos. 11 KV CT of capacity 50/5 amp 10 VA burden 0.5 class accuracy suitable for indoor installation of approved make by UHBVNL. 1 No. PT 11 KV 11000/110 V 3 phase oil filled /cooled 10 VA class accuracy 0.5 suitable for indoor installation of approved make by UHBVNL. 2 Nos. side cable termination end boxes heat shrinkable type for incoming andout going 11 KV XLPE cable of size 185 Sqmm X 3 core. Electronic tri vector meter 11 KV HT 50% class accuracy 0.5 11 KV/110 V for reading in KWH approved make by UHBVNL ISI Mark. The Panel will be completed with all internal wiring interconnection VT and HT compund filling of cable end boxes. HT cable connection etc. complete in all respect with guarnty for 12 month including its testing and approved of all items by UHBVNL authority including the cost of CT PT, TTB electronic meter and other equipment by UHBVNL authorities upto the entire satisfaction of the engineer in charge of the work.

S/E of LV cubicle Capacitor Panel (300 KVAR) type totally enclosed free standing type, powder coated dust, damp and vermin proof capacitor panel complete with busbars, Mv danger notice plate, ammeter, ammeter selector switch, indicating lamps. CTs heavy duty MPP resin filled capacitor. Suitable for capacitor switching with suitable capacity aluminum leads/solid aluminum strips rods connection of incoming and outgoing cables with thimbles including all accessories. Their wiring and control cable and having following incoming and outgoing switchgear complete as per technical specification as required including supply, installation, testing and commissioning of panel. INCOMING MAKE QTY. (i) MCCB 4P 630A LandT 1 (ii) SPREADER LINK LandT 1 (iii) EXT. ROTATARY HANDLE LandT 1 OUTGOING (i) APFCR RELAY 12 STEPS LandT 1 (ii) SELECTOR SWITCH LandT 12 (iii) MCB TP 16A LandT 1 (vi) MCB TP 63A LandT 12 (ix) CONT.DUTY CAPACITOR 15 KVAR LandT 1 (xi) CONT.DUTY CAPACITOR 25 KVAR LandT 11 (xv) CAPACITOR BANK 20 KVAR LandT 1 (xvi) CAPACITOR BANK 25 KVAR LandT 11 (xvii) AMPERE METER 3P LandT 1 (xviii) VOLT METER LandT 1 (xix) INDICATING LAMP LandT 3 (xx) MCB SP 6A LandT 3 (xxi) CT 600/5 LandT 3 FABRICATION SECTION Fabrication in 1.6mm/2mm CRCA Sheet Powder Coating in Siemens Grey Shade. TATA 1 Lock, Gasket, Rubber, Hardware etc. BUSBAR and HARDWARE, WIRING and ACCESSORIES (i) Aluminium Main Busbar, load wise Sub Feeder busbar colour coated Heat Shrink busbar sleeve nut-bolt, Washer, hardware etc. REPUTED 1 (ii) Power and control wiring will be ( ISI 1100V) Flamac smoke FRLS PVC Single core copper wire, copper lugs, PVC Sleeves Ferruels numbers Hardware and labour etc. REPUTED 1 CAPACTOR PANEL 300 KVAR

1000 KVA ONAN type Package substation as per bill of material and Technical Specification as under:- 11 KV Outdoor Package Sub-Station shall consist of following : A. HT Switchgear 11 kV, 630A, 21kA/3 sec, 3 Way, indoor, Non-Extensible SF-6 insulated RMU, comprising 1 No. fixed Manual Load Break switch and 2 No. fixed Manual Vacuum Circuit Breaker in stainless steel tank- with Operating handle, Voltage presence indicator (VPIS) and manometer integrated earthing switch. Interconnection between HT switchgear and transformer shall be using 1Cx3x95 sq.mm Al. unarmoured XLPE Cable. Make Schneider (CT2T2) Protection CT– 30-60/1A, 2.5VA, 5P10. 3No. Mechanical position indicator. Switch ON/OFF/EARTHED. 1Set Voltage presence Indication 1Set Manometer 1No. Operating Handle 1No. RMU shall be capable for cable termination of 1C x 300 sq.mm unarmoured Al XLPE Cable HT METERING `Single Phase, Resin Cast CTs with ratio 30-60/1 ring type 2.5VA burden, accuracy class 1` Delta/AE 3No. `Resin Cast Fixed type PTs with ratio 11KV/R3/110V/R3,50VA burden, accuracy class 1` Avcon/Kalpa/Savio 3No. Digital Multifunction meter CL-1 LandT/Secure/Schneider 1No. B. Transformer `1000 KVA, 11/0.433 kV, Dyn11, 3 Phase,50hz, Mineral oil filled hermetically sealed transformer with copper winding, plus 5% to - 5%@2.5% with off Load tap changer having class-A insulation and temperature rise in oil/winding of 40/45 deg. C [Max.] along with standard fittings and accessories as per IS:1180` Make - Sudhir, Schneider, LandT., Siemense, ABB `Losses shall be as per 1180 Energy Efficiency Level-2(2021) Amendment no.-4` `Total losses at 50% Load : 2620 Watts (max.) Total losses at 100% Load : 7000 Watts (max.)` Impedance: %Z – 5% (IS Tol.) Oil/Winding temperature indicator with alarm and trip contacts Make- Pecon/Preci-measure C. LT Panel `433V LT Indoor panel with 2000 Amps Aluminium Bus bars (100% for Phase and 50% for Neutral), Fabrication using 1.5/2mm CRCA sheet steel, Ingress protection IP2X/4X, complete with internal wiring consisting of following.` `1600A,4P,433V,50 kA Manually fixed type Microprocessor based release ACB with (O/L,S/C plus E/F protection)` `Schneider (Easy-pact MVS)` 1No. Resin Cast CT- 1600/5A,10VA, Accuracy CL-1.0 Matrix 3No. RYB, ON-OFF-TRIP Indication Schneider 1No. Digital Ammeter and Voltmeter built in selector switch CL-1 LandT/Secure/Schneider 1No. D. Outdoor Enclosure `Outdoor type enclosure having construction of Galvanised Sheet Steel. The Enclosure shall have IP54 degree of protection for HT and LT switchgear compartment and IP34 degree of protection for Transformer compartment. The enclosure exterior shall be Powder coated (Color -RAL-1001- Cream). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment.` 1Set 1000 KVA PSS (TRANSFORMER) E. Interconnection and Earthing Interconnection Between HT switchgear and Transformer using 1Cx3Rx95Sq.mm XLPE Al Single core cable and Interconnection between Transformers to LT switchgear using Aluminium bus bars. Internal earthing connections including Transformer Neutral by using 50x6 mm GI Strips. 1Set

Rubber mat Supply and laying of 12 KV grade 1 Mtr. Wide anti skid chequered type rubber mat.

S/E of LT panel Cubical type, totally enclosed free standing type, dust, damp and vermin proof panel, powder coated made up of CRCA sheet complete with Aluminium Busbar, Danger notice plate, interconnection with suitable capacity aluminum leads solid aluminum strips/rods, necessary interlocking and having incoming and outgoing switchgears as mentioned below, complete as per technical specification including supply installation, testing and commissioning of panel. MAIN INCOMING MAKE QTY. ACB 4P 1600A EDO LandT 1 OUTGOING MCCB 4P 400A 36KA LandT 2 SPREADER LINK LandT 2 EXT.ROTATARY HANDLE LandT 2 MCCB 4P 250A 36KA LandT 3 SPREADER LINK LandT 3 EXT.ROTATARY HANDLE LandT 3 MCCB 4P 100A 25KA LandT 3 SPREADER LINK LandT 3 EXT.ROTATARY HANDLE LandT 3 METERING `VAF METER plus SP MCB 3 -3NO. plus CT-3NOS. plus CT- T.B-4NO. plus INDICATING LAMP.` LandT 1SET FABRICATION SECTION `1 Fabrication in 1.6mm/2mm CRCA Sheet Powder Coating in Siemens Grey Shade. Lock,Gasket,Rubber,Hardware etc. ` TATA 1JOB BUSBAR and HARDWARE,WIRING and ACCESSORIES 1 Aluminium Main Busbar,load wise Sub Feeder busbar Colour coated Heat Shrink busbar sleeve nut- bolt,Washer,hardware etc. REPUTED 1JOB 2 Power and control wiring will be ( ISI 1100V) Flamac smoke FRLS PVC Single core copper wire,copper lugs,PVC Sleeves Ferruels numbers. REPUTED 1JOB 3 LABOUR plus PROFIT JMPS 1JOB MAIN LT PANEL

RCC Foundation `Providing RCC foundation of required dimensions as per OEM recommendations to provide levelled surface for placement of the PSS 1000 KVA complete in all respects and other related civil works as per directions of Engineer-in- charge. RCC FOUNDATION and OTHER CIVIL WORKS

Lightning Arrestor Supply of 11 KV Lighterning Arrestor (Conforming to ISS: 3070/ 1985) with latest amendments complete in respect and erection of the same upto the satisfaction of the Engineer-In- Charge. LIGHTNING ARRESTOR

S/E of LT panel Cubical type, totally enclosed free standing type, dust, damp and vermin proof panel, powder coated made up of CRCA sheet complete with Aluminium Busbar, Danger notice plate, interconnection with suitable capacity aluminum leads solid aluminum strips/rods, necessary interlocking and having incoming and outgoing switchgears as mentioned below, complete as per technical specification including supply installation, testing and commissioning of panel. MAIN INCOMING Make Qty. ACB 4P 1600A EDO LandT 1 INDICATING LAMP LandT 6 MCB SP 6A LandT 6 FABRICATION SECTION 1 Fabrication in 1.6mm/2mm CRCA Sheet Powder Coating in Siemens Grey Shade. Lock,Gasket,Rubber,Hardware etc. TATA 1JOB BUSBAR and HARDWARE,WIRING and ACCESSORIES 1 Aluminium Main Busbar,load wise Sub Feeder busbar Colour coated Heat Shrink busbar sleeve nut- bolt,Washer,hardware etc. REPUTED 1JOB 2 Power and control wiring will be ( ISI 1100V) Flamac smoke FRLS PVC Single core copper wire,copper lugs,PVC Sleeves Ferruels numbers. REPUTED 1JOB 3 LABOUR plus PROFIT BUS COUPLER PANEL