Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | L1 | Accepted-AOC 1st Lowest and reasonable | |
| 2 | L2₹45.2 L+₹3.5 L (8.43%)Rejected-Finance | L2 | Rejected-Finance 2nd Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical Rejected due to Firm not enlisted with appropriate category c(ii) |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
22 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mhow
HQ CWE Mhow Mhow Cantt Mhow-453441
PROVN OF TRANSPARENT PASSENGER LIFT (BUBBLE TYPE) CAPACITY 08 PASSENGER FOR TRG HALL CUM RESEARCH CENTRE UNDER GE (MIS), MHOW
2024_MES_639324_1
CWE/MHOW/21 (T) of 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
HQ CWE Mhow
As per tender documents
8 documents required · 8 mandatory
₹500
GE (M) Inf School Mhow
₹88,000
15 Apr 2024
27 Jan 2024
24 Feb 2024
27 Jan 2024
22 Feb 2024
8 Feb 2024
Amount
Excavating over areas, exc 1.5m but n. exc 3.0m deep and getting out in hard/dense soil including demolition of floor marble at site complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate, as in foundation filling, sub base of floor, etc complete all as specified and directed.
M&L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9.mm dia, etc complete all as specified and directed.
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in stirrups, spaces, nibs and binders complete all as specified and directed.
M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter finised fair complete all as specified and directed.
M&L RCC M-25 (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Returning filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified anf directed.
Removing excavated material (soil) to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L for rendering 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces and surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of 1st Quality oil emulsion distemper over new prepared surface of wall with putty complete all as specified and directed.
S&F 12mm thick Frosted Toughned Glass panels including necessary bracket/bolts/Spider fitting and all other fixing arrangement for lift chamber/well complete all as specified and directed.
S&F SS Frame work for Toughned Glass Lift Chamber including all fixing arrangement complete all as specified and directed.
Design supply, install, testing and commissioning goods lift (bubble type), speed 1.0 metre/sec with single speed motor 415 volts, 3 phase, AC 50 Hz supply,for 500 kg to 544 kg and suitable for 08 Passenger conforming to IS-14665 and as amended, suitable to serve G+02 upper floors with AC Variable Voltage & Variable Frequency Drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors, number of stop opening 6/6 with door drive (electrical motor driven mechanism), sliding stainless steel doors, over speed governer and automatic rescue device (ARD) system, 3D infra red sensor in full height of door and cross flow fan and ceiling light inside the car with emergency light and built in announcing system without hand set (03 Nos, one each in car, near ground floor landing floor ) complete all as specified in relevent IS codes (IS-14665 of 2015 Part-I, IS-14665 of 2009 Part-V, IS- 4591 of 2012, IS-15785 of 2007) and national building code -2016 and as directed by Engr-in-charge. (Note :- Defects liability period/maintenance of lift after execution will be three years. This maintenance should be covered by the contractor without any extra cost to the department). Make - TOIS/ Thyssenkrupp/ Kone elevator
TECHNICAL SPECIFICATIONS OF LIFT ARE AS UNDER : Floor designation - G+2 Machine and Controller Details Mahine Location - Machine Roomless - Gearless Drive system - Micro Processor based VVVF Main Power Supply - AC 3 Phase 415 Volts for Lift Shaft Details Shaft type - Steel structure with glass wall Shaft width mm x shaft depth mm - 1150 mm wide x 1250mm deep x 2200 mm high Overhead mm - 5000 Pit depth mm - 1500 Car door type - Power operated center opening sliding door No of door panel - 2 Panel Glass Car door (W xH) mm - 800 x 2000 Fan - Cross flow fan
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core x 35 sq mm complete all as specified (for lift supply) Make - Polycab/Havells/Finolex.
Excavating in trenches, in any type of soil, n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.
M&L for locally available river sand cushioning for under ground cable in trenches 8 cm before laying and 15 cm after laying of cable and punned thickness of sand shall be measured and paid for 18 cm only after punned/consolidated thickness complete all as specified and directed.
M&L for brick size sub class 'B' (modular size), laid flat in trenches for protection of cable complete all as specified and directed.
Supply, Fabrication, installation and testing of LT panel out door type factory made CPRI Approved, water and vermin proof protection of size 1000mm x 1000mm x 500mm (over all demension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incoming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old existing one complete all as specified and directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
M & L for earthing in repairs complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanised iron strip of size 32mmx6mm by means of bolts, nuts,check nuts and washer of galvanised iron or of steel all as shown in electrical plate No.5 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 40mm dia light grade pipe for iron strip of size 32mmx6mm protection and testing on completion complete all as specified and directed.
S&F for Galvanised iron strip of size 32 mm x 6 mm for each contunity conductor complete all as specified and directed.
MODI CORPORATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .