Fabrication or Repair of Platform Assy and Repair of Radiator Assembly of BEML WS28 2 Water Sprinkler Sl No 28251 OF ILBL OCP, LAKHANPUR AREA, MCL and Repair of Radiator Assembly of CAT834K Wheel Dozer Sl No 748 of ILBL OCP, Lakhanpur Area, MCL.

Amount

Fabrication/Repair of Platform Assy & Repair of Radiator Assembly of BEML WS28-2 Water Sprinkler Sl. No. 28251 OF ILBL OCP, LAKHANPUR AREA, MCL and Repair of Radiator Assembly of CAT834K Wheel Dozer Sl. No. 748 of ILBL OCP, Lakhanpur Area, MCL. Note: Gouging Electrodes, O2 & DA gas, Cranes, Welding Set, Free Electricity to be provided departmentally.

P/F Heavy duty pipe Dimension atleast 1" ID as per IS 1239 (Part-1)

P/F Hexagonal Bolt/Screw M24X70mm or 1 inch along with Ring Washer.

P/F Hexagonal Bolt/Screw M16X30mm or 5/8in along with Ring Washer

Thread Locker High Strength Thread Locking Adhesive 250ml (Loctite 263 & equivalent )

Rust Remover Solution, Aerosol based 500ml (Stanvac, Pidilite & Equivalent)

Electrode (Lomelt 103, 4mm & equivalent )

Red Oxide (for Primer)

Black Enamel Paint (for 03 layer coating)

Enamel Paint(Yellow)

Turpentine Oil

Paint Brush (Width: 3 inch)

Wire Brush

MS Metal Sheet of thickness 5mm

Square Pipe Structure 2inchx2inch (Thickness 04mm)

Grinding Wheel (5inch)

Pencil Grinding Wheel (1")

Cutting Wheel (5inch)

Grinding Machine Hiring Charges Portable Straight 5"

Pencil Grinding Machine Hiring Charge 1"

Cleaning Solution (Non-acidic, non-corrosive) 250ml, (Wurth & equivalent)

Copper Brazing Rods, BACuAg 16A Alloy Dia: 3.15mm, 50cm atleast & equivalent

Brazing Flux suitable for Aluminium/Copper/Copper Alloys

O-ring/Gasket Set, Nitrile rubber, Metric kit, Hydraulic Systems 3mm-44mm

Hiring charges of Cold Water High Pressure Washer with Gun

Fin Straightener

Brush (Soft Grade Nylon/Fiber made)

Charges for Radiator Hydraulic/Pneumatic Leakage Test

Labour Charges for Fabrication/Repair of Platform Assy. of 01 No. HEMM [WS28-2 Water Sprinkler Sl. No. 28251].

1) Inspection of damaged part & dismantling of damaged part of the railings and Platform assembly. 2) Fitment of the assemblies in the machine, required bolting and welding as per the direction of Engineer In-charge.

1) Cutting of the Metal Plates & Pipes in the required shape for fabrication work as per the figure/instruction of EIC. 2) Welding of the Metal Plates in the desired shape with MS Electrodes. 3) Cutting out of Plates, Fabrication of the Railings & Platform assembly as per the diagram/instruction given by EIC(Engineer In-charge).

1) Adhesive, Primer, Paint application & final finishing work and then inspection of the assembly.

Labour Charges for Radiator Assy for 02 Nos. HEMMs [Water Sprinkler Sl. No. 28251 & CAT-834K Wheel Dozer].

1) Opening of Radiator Cover, Platform assy, Removal of Hose Connections and dismantling of Radiator Assy. 2) Washing of the radiator assembly with Washing Water Gun, Cleaning of Radiator Assy/fins./tubings with cleaning solution 3) Final fitment in the machine and mounting of Platform Assy & Radiator cover & testing of the radiator during machine operation.

1) Pneumatic/Hydraulic leakage testing to find out the blocked/damaged tubes of the Radiator Assy. 2) Cleaning/Repairing/Brazing of damaged/blocked tubes, Straightening of Fins & testing of the repaired assembly. 3) Pneumatic/Hydraulic leakage testing for final check for any leakages left in the repaired Radiator Assy.

Total impact of GST for the purpose of CTC

M/S RAHUL ELECTRICAL WORKS (BID ID -1209776)

OM SHRI SAI TRADERS (BID ID -1209821)