SPECIAL REPAIRS TO ROOF, FLOORING, JOINERY, WALLS INTERNAL ELECTRIFICATION AND FALSE CEILING IN BLDG NOS 31 AND 33 OF CHIEF ENGINEER (FACTORY) HYDERABAD UNDER GE (SOUTH) SECUNDERABAD

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, complete all as directed.

M&L for 10 mm thick Dark Shade/ Double charged/ Ultra charged vitrified ceramic tiles, area of each tile exc 0.36 sqm but not exc 0.42 sqm (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. complete all as specified and directed.

All as per Item No 2.00 above but in vetical surface such as skirting/dado etc over 10 mm thick back coat/plastering in CM (1:4) complete all as specified and as directed.

M&L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 15 mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc) sheets in roof covering including ridges all as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge to wall fixed with self tapping screws complete all as specified and directed

S&F 40mm x 6mm mild steel flat iron flllets wind ties for roof including screwing bolts complete all as specified and directed

Demolition of brick masonary or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as sepcified and directed

M&L Brick work with flyash bricks, straight or curved on plan exc 6mtr mean redius built in CM 1:6 complete all as specified and directed.

M&L Brick work with flyash bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM (1:6) on fair faces and other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Taking down chowkats or frames with shutters without taking of shutter from frame, area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed

All as per itme No 14.00 abvoe but area n.exc 1.5 Sqm each complete all as specifed and directed

Taking down and re-fixing of shutters in same opening after easing of any description exc 1 Sqm and n.exc 2.00 Sqm each complete all as specified and directed.

M&L for mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with gusset plates rail, brasses rail etc exclusive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including preparation of surface before fixing complete all as specified and directed.

S & F 2nd class hardwood 35mm thick, plain framed panelled shutters (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats, complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty in square panes, not exc, 0.50 sqm each pane complete all as specified & directed.

M&L preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primers complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.

M & L for preparation of old painted surfaces of steel and iron work of any description exc 10cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.

Dismantling of false ceiling of any type complete all as specified and directed.

M&L for providing false ceiling with anodised aluminium snap grid false ceiling of grid size 605 X605 mm consisting of aluminium main and cross T section of size 25 X25 X1.6 mm thick complete all as specified and directed.

M&L 10mm thick PVC insulation panel with EPS struck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/ GI/ MS and fixed on ceiling frame complete all as specified and directed.

S & F Hangers 6mm dia GI (upto 1200mm long) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, WHB counter and similar works like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete of any description and in ny position not otherwise specfically provided for complete all as specified and directed

M & L for PCC 75mm thick type C1 1:3:6 (using 20mm size graded aggregated) as in plinth protection laid in panels including finish the surface smooth and even without using extra complete all as specified and directed

Dismantling timber scantling 40 Sqcm & over in section in any position in unframed work complete all as specified and directed

M & L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for complete removel of existing treatment on old plastered wall surface and appying two coats of plastic emulsion paint over one coat of primer and 2mm thick layer of wall putty complete all as specified and directed

M&L for complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a coat of primer up to four storey height etc complete all as specified and directed.

S&F venetian blinds, vertical type, 100 mm width wth polyester fabric of approved colour and patten including aluminium fittings, and top rail, and nylon button/loops etc fixed complete all as specified and as directed Make : Vista or equivalent as approved by GE

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

Taking down old and unserviceable sub main wiring any size/type/core included earth wire complete with batten/conduit etc and making good disturbed surface to match the existing disturbed surface all as specified and directed.

Taking down the existing unserviceable main switch/cut out/DBs of any type /capacity /description as existing at site including making good the disturbed surfaces to match with the existing finishes all as directed.

M&L for point wiring on concealed conduit complete all as specified with 1100 Volts grade 1.5 sqmm insulated FRLS PVC with multistranded copper conducter conforming to IS:694:1990 with ISI markking ( For Phase, Neutral and Earth) in and including non metallic PVC rigid coundit medium grade with ISI mark of size 20 mm dia with all accessories concealed in wall/ceiling/floor/roof etc, for fixing modular switches, sockets, fan regulators etc of suitable modules and earth wire to be connected to commom earth dolly/pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/ grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet / Modular cover plate with frame, Modular metal flush box as per requirement including running up to 1.5 Sq mm copper conducter PVC insulated FRLS cable as earth continuiy conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ requlators etc all as soecified for and directed foe the followig :-

(a) One light point controlled by one, one way switch 5A, SP

(b) One ceiling / exhaust fan point controlled by one, one way switch and regulator

(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board

(d) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No. 47.00 here-in-above but using 4 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade for 5 Pin 15 Amps switch socket combination point on independent board including running 4.0 Sqmm copper conductor PVC insulated cable earth continuity conductor all as specified and as directed.

S & F Modular Switch 1 way 6 A, 1 Module capacity 230 Volts, complete all as specified and directed.

S & F Modular Socket, 6A- 2/3 combined 2 Module of capacity 230 Volts, complete all as specified and directed.

S & F switch socket outlet flush type multipurpose 2/3 pin 5 amps 230 volts all as specified.

S & F Modular Socket, 6/16A- 2/3 combined 2 Module of capacity 230 Volts, complete all as specified and directed.

S&F ceiling rose surface bakelite 5 amps 230 volt with three terminal 50x65 mm size complete all as specified.

Supply & Fix Modular ceiling fan regulator 2 module step type AC 240 Volts suitable for 1200/1400 mm sweep complete all as specified and directed

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with flush type locking system complete all as specified.

S&F MCB SP 240 Volts suitable for fixing in MCB DB's of capacity 6 to 32 Amps complete all as specified and as directed.

S&F MCB SPN 240 Volts 'C' Series suitable for fixing in MCB DB's of capacity 40 Amps complete all as specified and as directed.

S&F 36 watt recess softline luminaire (2X2) FLAT PANEL suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal including necessary alteration to the existing false ceiling confined to the electrical fitting area only and complete all as specified and directed

S&F 3 watt, 6500K, round type, indoor decorative slim, compact, aluminium, die cast edge lit panel recess mounted round fixture with opal diffuser and suitable for armstrong/grid ceiling including integrated driver complete with all accessories prewired and including connecting up with three core 1.5 Sqmm PVC insulated copper conductor cable complete all as specified and directed

M&L for sub main wiring with two runs of single core 6 sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 6 sq mm PVC insulated FRLS unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 6 sq mm cable, one run of 6 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

S&F Security light of 1x24 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 2.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box and bracket made out of GI pipe of suitable dia bore not less than 1.2 mtr long and fixed on walls/ poles with 2 Nos MS clamp made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc complete all as specified and as directed

S&F Rigid non metallic PVC conduit, 20mm external bore, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers and fefixing accessories such as couplers, locknut, saddles, pipe hook etc concealed in wall for drawing PA system cables complete all as specified and as directed

BEEGEE DESIGN SYSTEMS

M/S V PRATAP REDDY

M/S B.SHRAVAN KUMAR

SHAH ENTERPRISES

harshraj and co

K LAKSHMAN SINGH AND CO

M/s Bhavani Constructions

M/s G.CHAKRAPANI AND SONS

B Sreepathy Rao & Sons