PROVN OF BARBED WIRE FENCING WITH RCC BOUNDARY PILLARS FOR NEWLY SURVEYED DEFENCE LAND AT MADUKKARAI, INS AGRANI, COIMBATORE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L Cement concrete type D2 1:4:8 using 40mm graded aggregate in foundations,filling and mass concrete complete all as specified and directed.

Formwork (rough finished surfaces of concrete) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork ( rough finished surfaces of concrete) to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto as per item no.05, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F round bars 6mm to 8mm dia Fe 290 (Gde -E-165) as in hooks for securing barbed wire complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 1:2:4 using 20mm graded aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 1:2:4 using 20mm graded aggregates in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 mixed on fair faces of concrete surfaces finished even amd smooth without using extra cement complete all as specified and directed.

M/L for Preparation of newly plastered surfaces and applying two coats of cement based paint including alkali esistant priming paint complete all as specified and directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces complete all as specified and as directed.

S&F galvanised steel razor wire (RBT) CBT 20 with 2.5mm thick wire and blade thickness 0.4 to 0.6mm, tensile strength 1350-1550 N/mm2 and strand of straight razor wire (material stainless steel grade 304) and fixed with clips of heavy duty 'J' clips blade length 20mm complete all as specified and as directed. (each line wire to be measured)

S&F galvanised steel concertina coil CBT 20 with outer dia of 610mm,blade thickness 0.4mm to 0.6mm,tensile strength 1350-1550N/mm2 and strand of straight razor wire and fixed with clips of heavy duty 'J' clips blade length 20mm core wire diameter 2.5mm with number of loop per coil 50 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material and depositing inside MOD land as directed by Engineer in charge complete all as specified and directed.

Cutting opening in brick masonry walls (any description) with or without reinforcement for openings like gates or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed.

Material and Labour for framed work Fe 410-W(Gde-E- 250)quality-A as in gates of angles or other section with gusset plates, rails, braces,holdfasts,hinges etc all as specified and directed (for fabrication of Gates) .

Rajapriyaconstruction

ABHISHEK CONSTRUCTIONS