REPAIRS CLEANING OF SEPTIC TANK, SEWAGE SUMPS, FILTER BED, SOAKAGE WELL AND REPAIRS TO SUNKEN FLOOR INCLUDING VERTICAL STACKS IN MD ACCN IN ARMY AREA AND REPAIRS REPLACEMENT OF SUBMAIN WIRING MCB DB LOAD LINE DB MCCB AND CON

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement conctrete (un-reinforced) of any description and in any position complete all as specified and directed

Dismantling textile coverings including frames (if any) and cover fillets (measured flat and not girthed) complete all as specified and directed

M & L for rendering 15mm thick in CM 1:3 with water proofing compund on fair faces of brick on concrete slab & sides of sunken portion, finished even and smooth w/o using extra cement complete all as specified and directed. Note : WPC will be measured and paid seperately.

M&L for priming the plastered surfces at the rate of 0.7 kg/sqm (for moderate conditions), complete all as specified and directed.

M&L for applying evently a tack coat of industrial bitumen at the rate of 1.2 Kg per Sqm including cleaning surfaces of sunken complete all as specified and directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface of sunken by forced application complete all as specified and directed.

M&L for 50mm bore GI tubes medium grade as spout pipe for draining out water from sunken floor complete all as specified and directed.

M & L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in, foundation filing and mass concrete. bed blocks, coping, lintels upto 1.5m span and similar work complete all as specified and directed.

M & L 25mm thk PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in flooring, subbase to floors complete all as specified and a directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified and directed.

S&F in repairs 15mm bore angle cock/stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm) x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:3), complete all as specified and directed.

Supply only Integral Water Proofing Compound complete all as specified and directed.

Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store, complete all as specified and directed.

M&L for unplasticised PVC pipes 15mm bore of pressure rating 10kgf/Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

M&L for unplasticised PVC pipes 20mm bore of pressure rating 10kgf/Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F in repairs 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , complete all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), complete all as specified and directed.

S&F in repairs 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 110gms, complete all as specified and directed.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F 750 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F in repair Lid for rotational moulded polyethylene water storage tanks (any capcity) complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 and n.exc 1000ltr and from mouths of circulating pipes, etc. complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook (Make Prayag or equivalent) complete all as specified and directed

S&F in repairs Vitreous China wash Basin (flat back or angle back type), of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) all as specified and directed

S&F in repairs PVC waste pipe 32mm bore all as specified

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

M & L for forming Jambs etc to openings (to forgoings items) incl cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in CM 1:6 complete all as specified and as directed

S & F in repairs of anodised aluminium window and ventilator shutters (powder coated), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinge type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed

S&F in repairs of Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S & F in repairs of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawings

S&F in repairs of Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site incl all fittings(handles/tower bolt/sliding bolt/hinges etc as per specifications & drawing.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repairs of 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs of 150mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grills and grating etc complete all as specified and as directed

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S & F in repairs 4mm thick sheet glass ordinary quality, glazing with oil putty or wooden beads in squares nexc 0.5 sqm in each pane, complete all as specified and as directed

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for preparation of newly jambed/plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete all as specified and directed.

Removing plants, weeds etc., on chajjas, roofs, walls at any position and at any situation of height upto and including 03 storeys/10m, RCC roof parapets and sparying weed controlling chemical using glyphosate or equivalent in dosages as per manufactures complete all as specified and directed.

M&L Rendering 5mm thick in CM 1:4 with WPC compound over a coat of 10mm thick in CM 1:6 on other than fair faces of brick work surfaces, even and smooth (without using extra cement), complete all as specified and directed. Note:- WPC will be measured and paid separately.

M & L for Chipping, Cheselling surface mechanically with chipping machine :- (1) Providing zinc rich primer for exposed reinforcement (2) Providing 100 x 100 x 3 mm weld mesh and fixing the same with shear connectors of 8mm dia with epoxy resin (3) Guniting the area with CM 1:3 of over all thickness 50mm in with two layers in small areas/patches complete all as specified and as directed

M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint and one coat of wall care putty over chalk whitening primer complete all as specified and directed.

M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick CM 1:4 screed bed, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Cleaning of septic tank any capacity, by bailing/removing out sediments, sludge etc., by using vehicle mounted with compressor and sucker tank with covered container and washing wall/floor surface with fresh water complete all as specified and directed. Note:- The extract of water & sludge to be taken away far from the MoD land and the volume of sludge obtained from cleaning measured from size septic tank and compared/check with tank size

Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth upto 1m deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank with covered container and wash down with water for smooth functioing of sewage line complete all as specified and as directed. Note : sludge obtained from cleaning shall be removed to out of MoD land and burried into the ground.

Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth exc 1m but nexc 2m in deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank with covered container and wash down with water for smooth functioing of sewage line complete all as specified and as directed. Note : sludge obtained from cleaning shall be removed to out of MoD land and burried into the ground.

Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth exc 2m but nexc 3m in deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank with covered container and wash down with water for smooth functioing of sewage line complete all as specified and as directed. Note : sludge obtained from cleaning shall be removed to out of MoD land and burried into the ground.

Removing blockage from WC by using rubber cup 125mm dia with wooden handle and clearing the blockage upto manhole with cleaing rod including removal of all materials from gully trap of WC and depositing of complete all as specified and directed.

Removing blockage from Kitchen & bathroom/WHB by using rubber cup 125mm dia with wooden handle and clearing the blockage upto manhole with cleaing rod including removal of all materials from floor trap/Nahani trap and depositing of complete all as specified and directed.

Cleaning of blocked sewage pipe lines 100mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing thedelogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed.

Cleaning of blocked sewage pipe lines 150mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing thedelogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed.

Cleaning of blocked sewage pipe lines 200mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing thedelogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed.

Excavation in soft/loose soil in trenches to the required width and depth to remove the damaged sewage lines of 100mm internal dia pipe by demolition of hanuching concrete to the pipe (one length 0.60m) and supply & fix new 100mm internal dia pipe (one length of 60cm) including jointing with existing line and providing hanuching concrete in PCC (1:3:6), type C2 (using 40mm graded stone aggregates), returning filling of soil, removal of surplus soil including temporarily plugging the adjacent manholes etc., complete all as specified and as directed.

All as per Item No 91.00 described here in before but for 150mm internal dia pipe complete all as specified and as directed..

All as per Item No 91.00 described here in before but for 200mm internal dia pipe complete all as specified and as directed..

Demolition and breaking up drain pipes, 100mm internal dia (Salt glazed stone ware pipes) including bed & haunching concrete (including removal of debries to a distance not exceeding 50 m at a level as directed) and provsion of Material and labour for new salt glazed stone ware drain pipe 100mm internal dia of grade ‘A’, laid in trenches and set and jointed in cement mortar 1:1 complete all as specified and as directed. Note:- Prvision of Bed and haunching concrete will be measured and paid separately.

All as per Item No 94.00 described herein before but for 150mm internal dia pipe complete all as specified and as directed.

All as per Item No 94.00 described herein before but for 200mm internal dia pipe complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M depth for foundation etc in hard/ dense soil complete all as specified and directed.

M&L for Reinforced concrete pipes, 100mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1, including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed.

M&L for Reinforced concrete pipes, 150mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1 including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed.

M&L for Reinforced concrete pipes, 200mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1 including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed.

M & L for concrete bed to SWG/Reinforced concrete pipe line of 100mm bore with PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

All as per Item No 101.00 described herein before but for 150mm bore pipe complete all as specified and as directed.

All as per Item No 101.00 described herein before but for 200mm bore pipe complete all as specified and as directed..

Demolition of reinforced cement concrete concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for mild steel deformed TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

All as per Item No 105.00 described here in before but 10mm dia and over complete all as specified and as directed..

M & L for precast cement concrete in (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar 1:6 as in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face including necessary form work complete all as specified and directed.

M & L for cement concrete (1:3:6), type C1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed., including necessary form work complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete article including all quoins, arches, pillars including coping etc., complete all as specified and directed. Note:- Serviceable bricks shall be stacked properly for reuse.

All as per Item No 109.00 described herein before but except bricks Complete all as specified and as directed. Note:- Serviceable bricks obtained from demolition shall be reused after cleaning.

M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished fair and even complete complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) with WPC on other than fair faces of brick work or concrete surface as in manholes, Septic tank etc., finished fair and even complete all as specified and as directed. Note : WPC shall be measured and paid separately

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and as directed.

Removal of excavated surplus soil to a distance exc 50 m and not exc 250m and depositing where directed at a level n. exc 1.50m above the starting point and complete all as specified and directed.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc.,complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20/25mm dia and its accessories fixing on wall/ceiling/trusses with suitable clamps , screws etc including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for :-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan/wall mounted fan point controlled by one switch.

One 3 pin 5 amps socket point on independent board

One 3 pin 5 amps socket point on same board

M & L for point wiring with 4 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20mm dia and its accessories fixing on wall/ ceiling/ trusses with suitable clamps , screws etc including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board complete all as specified and directed.

M&L Pointing wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for one light/fan/Bell/5 Amp socket complete all as specified and directed.

M&L Pointing wiring in Existing conduit with 4 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for 15 Amps socket complete all as specified and directed.

M&L for replacement of laminated hylam sheet top cover with brass screws, cup wahser suitable for 03/04 modules concealed box and cutting of grooves for switchs,sockets and regulator etc complete all as specified and directed. (Note: 1. Rates deemed to be included for removing and refixing of electrical point connections in switch board complete. 2. Switch,sockets,regulators to be measured and paid separately)

All as per Item No. 20 above but 06 to 10 modules complete all as specified and directed.

All as per Item No. 20 above but 18 to 24 modules complete all as specified and directed.

S&F Switch piano flush type, single pole,5 Amps complete all specified. complete all as specified and directed.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all as specified and directed.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all as specified and directed.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all as specified and directed.

S&F electronic fan regulator, flush type phenolic laminated sheet etc complete all as specified and directed.

S&F Bell , ding-dong type , AC, 215 volts, 50 HZ complete all as specified and directed.

S&F Bell push, flush type, single pole, 5 Amps, 240 volts complete all as specified and directed.

S &F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F of LED tube light fitting 20/22 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessoreis including taking down old light fitting complete all as specified and directed.

S&F of LED tube light fitting 9/10 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessories including taking down old light fitting all as specified and directed.

Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ including taking down fitting complete all as specified and directed.

Supply and fix LED building security light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light complete all as specified and directed.

Supply and Fixing of Rigid non-metallic PVC conduit for 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc with suitable TV socket box complete all as specified and directed.

Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor fixed on walls ceiling / roof trusses etc with fixing accessories complete and connecting to common earth dolly complete including taking down unserviceable submain wiring with accessories complete all as specified and as directed.

Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, four runs of single core 10 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 10 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor fixed on wall/ ceiling / roof trusses etc. and connecting to common earth dolly complete including taking down unserviceable submain wiring with accessories all as specified and as directed.

Replacement of MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

Replacement of MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

Replacement of MCB DB TPN 4 way, distribution DB double door, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for TPN MCB 63 Amps as incomer and SP MCBs 40 Amps as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming MCB and Outgoing MCB measured separately relevant items.

Replacement of Vertical Load line DB TP&N 4 way, double door, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 40 / 63 Amps as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevent items.

Replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 to 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Replacement of 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN and current carrying capacity 40-100 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.

Material and labour for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 10 Sqmm 2 core in replacement of the following sizes cross-sectionl area fixing with suitable clamps at ceiling/trusses including taking down of old unserviceable cable of any type complete all as specified and as directed.

All as per Item No. 146 above but 16 Sqmm 3.5/4 core complete.

All as per Item No. 146 above but Sqmm 3.5/4 core complete all as specified and directed.

Replacement of MCCBs 63 Amps 415V,16KA, 4 Pole complete all as specified and directed.

Replacement of MCCBs100 Amps 415V,16KA, 4 Pole complete all as specified and directed.

Replacement of MCCBs125/160 Amps 415V,16KA, 4 Pole complete all as specified and directed.

pmv.enterprises (BID ID -3150337)

PSK Enterprises (BID ID -3150531)