Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.5 LAccepted-AOC SAHEED UDHAM SINGH NAGAR THANDI KHUEE SUJANPUR PATHANKOT 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | L2₹94.6 L+₹13.3 L (16.4%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹97.5 L+₹16.2 L (19.9%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2023_MES_626520_1
8323/51/E8
Open Tender
Civil Works
Item Rate
334 days
Jalandhar Cantt
Class C Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹1,000
Garrison Engineer East Jalandhar Cantt
₹1.8 L
Yes
29 Feb 2024
2 Nov 2023
12 Dec 2023
2 Nov 2023
5 Dec 2023
23 Nov 2023
Amount
Demolition of brick work of any description built in cement mortar, complete all as specified and directed.
M&L brick work with sub class `B` bricks straight or curved on plan exc. 6m mean radius using old size bricks in cm 1:6, complete all as specified and directed.
All as sr item -2-But except brick --do--
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregates as in sub base of floors etc 25 mm thick finished even and fair to receive the top layer.
M & L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
All as per item No 07 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F Non skid ceramic coloured tiles of size 300x300mmx7mm thick as in floor etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.
S&F Non Skid ceramic coloured tiles of size 400x400mmx7mm thick as in floor etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.
All as sr item -10, but as in skirting, dado & vertical surface over and incl 10mm thick screed in cement mortar 1:4 on walls, finished even and rough to receive the top layer as specified.
M & L coloured ceremic glazed tiles of size 450x300x7mm thick as in skirting, dado & vertical surface, fixed with neat cement slurry in vertical surface to wall ,pointing in coloured cement to match over and incl 10mm thick screed in CM 1:6, complete all as specified and directed.
Taking down cement plaster/ terrazzo of any description incl. raking out joints hacking for key scrubbing down with water etc. complete all as spcifed and directed.
M&L for Rendering 15mm thick in cement mortar 1:6 on (INTERNAL) other than fair faces of Brick walls or on concrete surfaces, finished fair and even, complete all as specified and as directed.
M&L for 15mm thick rendering in Cement Mortar 1:4 on External Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even, complete all as specified and as directed
M&L for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc., plastered surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed.
M & L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.
M&L preparing newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L for prepartion of new plastered surface of wall and applying two coat of cement base paint, complete all as specified and directed.
Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified.
Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces),washing rubbing down and stopping of distempered and painted surface and applying one coat of oil Emulsion Distemper (OBD) complete all as specified.
Complete removal of existing surfaces of wall and applying two coat of oil Emulsion Distemper (OBD) over a coat of birla white wall care putty complete all as specified.
Material and labour for preparation of old decorated plastered surface of ceiling including cornices pilasters etc.and applying one coat of white wash on ceiling complete all as specified and as directed.
Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint complete all as specified.
Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying Two coat of cement base paint complete all as specified.
M&L 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and directed by Engr in charge with WPC.
Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight.
Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator ”
Prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of (white or tinted) complete all as specified.
Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint all as specified
Prepration of old painted surfaces of concrete/brick surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint all as specified
M& L 1 mm thick wall care putty on wall as specified and directed by Engineer-in-charge.
M&L 50mm thick PCC 1:3:6 type C-1 as in plinth protection using (20mm graded stone agg) finished even & smooth w/o using extra cement.
M&L PCC 1:7:12 type F-2 (40mm graded brick aggregate) as in filling in sunken floor, complete all as specified and directed.
M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces mixed with water proofing compound @ 3% by weight of cement, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)
Supply only integral water proofing compound, complete all as specified and directed.
M&L for Bitumen primer for use in waterproofing and damp-proofing treatments @ the rate of 0.3 Litre / sqm, complete all as specified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sqm, complete all as specefied and directed.
A PP based polymeric membrane 3mm thick reinforced with polyster non wove fabric ( wt not less than 150 gms /sqm ) laid on primed surface by forced application complete all as specified .
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcifed and directed.
Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290, Gde E-165 etc, complete all as specified and directed.
Cutting holes into brick wall built in CM area exc 150 Sqcm & not exc 400 Sqcm and making good in CM (1:3) or cement conc. 1:2:4 type B1as required, complete all as spcifed and directed.
Taking down chowkats or frames with shutters (without taking of shutter from the frames).of any description n. exc. 1.5 sqm each for doors and windows, complete all as spcifed and directed.
All as per item No. 44 above but exc. 1.50 Sqm and not exc. 4sqm each
Taking down shutters of any description not exc. 1 Sqm and n.exc. 2 sqm each, complete all as spcifed and directed.
Taking down shutters area exc. 1 sqm but n. exc. 2 sqm and refixing in the same opening after easing and adjusting and making the door closing properly including refixing builder's hardware complete all as specified and directed.
Re-securing or easing and adjusting without taking down shutters of any description, area exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.
S &F Framed work as in door or gates of angles or other section with gusset plates rails,braces etc complete drilling for fixing of steel sheeting or other covering doors etc,conforming to Fe-290. Gde-E-165, complete all as specified and directed.
M & L Second class hard-wood in scantlings, timber fixed, clean sawn all as specified and directed by Engr-in-Charge.
S&F 35mm thick 2nd class hard wood plain framed panelled factory made shutter with 2 number of 9mm thick (BWP) commercial ply wood panel, size of rails and styles as per IS-1003 (part-1) and shutter shall be double or single leaf as the case may be and complete all as spcifed and directed.
S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass,gauge etc (without shash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail 7 bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain clour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in frame at site as per specification.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain PVC sheet reinforced with MS square tubesupplying and fixing in opening as per specifiactions, complete all as spcifed and directed.
S&F butt hinges 100mm long all as specified and directed.
S&F tower bolt 200mm long all as specified and directed.
S&F bow handle 125mm long all as specified and directed.
S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate).
S&F MS barrel tower bolts stove enamelled black with bright bolt , 200mm size
S&F MS pressed handle oval type stove enamelled black 125mm in size.
S&F mild steel, sliding door bolt stove enamelled 300mm long as specified.
Supply and fixing aluminium anodised barrel tower bolts of extruded section 100mm long.
Supply and fixing aluminium anodised handles 125mm long.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F in repair mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed in repairs complete all as specified and directed.
S&F in repair 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed in repairs complete all as specified and directed.
S&F in repair 75mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame fixed in repairs complete all as specified and directed.
S&F in repairs mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.
S&F in repair mild steel pressed handles, oval type, stove enameled black 125mm size complete fixed in repairs all as specified and directed.
S&F in repair mild steel handle left or right side for window duly painted with black Japan paint complete all as specified and directed.
S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.
S&F in repair of 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.
S&F in repairs 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair extruded aluminium alloy handles, fabricated type, anodised, 100mm size, all as specified and directed.
M&L petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys complete all as specified and directed.
M&L petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making it serviceable complete all as specified and directed.
M&L welding in repairs not exceeding 2.5cm in length & thickness of metal to be welded n. exc. 6mm complete all as specified including material & labour.
M&L welding in repairs exc. 2.5cm but n. exc. 5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified including material & labour.
M&L petty repairs to PVC door shutter by making minor adjustment to hinges etc easing of shutter including taking down of shutter if required complete all as specified and directed.
S&F in repair Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, steel wire mesh 0.56mm dia & and average width of aperture 1.18mm and 4mm thick plane sheet glass/figured glass and necessary cooler arrangement in window complete all as specified and directed. Note :- The window/ventilator glazed and gauged (combination) are fixed on site and net opening of window/ventilator are measued one time only to paid to contractor.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.
All as per item 82, above but in repairs
Hacking out old broken glass (any thickness ,size ,quality or description) from wdn frame or stone, concrete or brick surrounds ,glazed with putty or fixed with beads.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each panes complete all as specified.
S&F 3 mm thick figured glass pinhead type in squares n.exc 0.5 sqmk each pane
M&L in repair 25mm dia mild steel pipe curtain rod with powder coated including fancy type with knob/brackets fixed on both ends incl finials etc, complete all as specified and directed.
M&L Preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
M&L Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified.
Demolition of cement concrete of any description and in any position not otherwise specially provided for.
M&L for Cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate ) in sub base or foundations, filling and mass concrete, complete all as specified and directed.
M & L for Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and incl 40mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.
Material and labour for Providing, cement concrete PCC 1:2:4 Type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for Cement concrete tiles with grey cement and pigment of size 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.
Disconnecting existing tanks exc 250 Ltr and n exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as spcifed and directed.
S&F 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified.
All as per srl item No 96, above but 1000 Ltr
S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms, complete all as spcifed and directed.
All as per item No 98, above but in repairs
Taking up or down old steel tubing and connections including cleaning for re-fixing or removal to store, bore of pipe 15mm complete all as spcifed and directed.
All as per Srl Item No 100, here-in-before but 20mm bore
S&F GI water tubing 15mm bore medium grade with all fittings fixed to wall, Ceiling and floors etc complete all as specified and directed.
All as per Srl Item No 102, here-in-before but 20mm bore tube.
Refixing of old tubing with necessary connection inlcuding new fittings if required in new or old position in wall, ceiling and floor for 15mm bore pipe, complete all as spcifed and directed.
All as per Srl Item No 104, here-in-before but 20mm bore.
S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat covers black closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs PVC connection 450mm long, 15mm size with PTMT nuts complete all as specified
S & F in repair new flxible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed
S&F in repairs 32mm dia waste coupling of PTMT (half or full threaded), (minimum weight 45 gms) complete all as specified and directed.
S&F in repair Vitreous China ware wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets or erecting stand and full ped
S&F in repairs stop valves 15mm , cast copper alloy , fancy type chromium palted screwed down , high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed.
Supply and fix in repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.
S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting.
Supply and fixing 15mm bore Pillar taps ,cast copper alloy with capstan heads chromium plated screwed down high pressure ,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for pipe and fixed .
S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as spfd in repairs
S&F in repairs CP grating doom 100mm dia, complete all as specifed and directed.
S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.
S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed
S&F in repair 75mm dia cast iron floor trap,with grating including to waste pipe fixed in cement concrete type B-1 (1:2:4)
S&F Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.
S&F Corner glass shelf (with bracket) (as approved), complete all as specified and as directed.
S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed.
S&F Chromium Plated health faucet for EWC with 1 mtr long chromium plated tube with wall hook superior quality complete all as specified
S&F PVC cover of water tank capacity 500 litre complete all as specified and directed.
Repair to floor trap around internal surface upto water seal with white cement to prevent seepage from floor/ wall/ void/ joints including taking down and providing new CP hinge grating 125 mm dia circular complete all as specified and directed.
S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 550mm x 450mm bowl size 500mm x 400mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.
S&F in repair stainless steel plate rack made of 0.50mm superior quality size 920mmx785mmx255mm weighing not less than 8 kg complete all as specified and directed.
S&F in repair mild steel angle iron bracket for WHB and kitchen sinks including making good to existing surface (size of angle 35 x 35 x 5mm thick) complete all as specified and directed.
M&L petty repair to leaking high/ low level flushing cistern including adjustment in the internal fittings, repairs to PVC bends pipe etc all as per directed by Engineer-in-Charge.
M&L petty repair to leaking PVC/ brass tap/ stop cock of any type/ size with replacement of washer/ jumper valve etc. complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as specified.
S&F in repair 110 mm bore PVC pipes single socketed in any length with rubber ring laid in trenches or in floors
S&F in repair 75 mm bore PVC pipes single socketed in any length with rubber ring laid in trenches or in floors
S&F in repair PVC SWR bends of 110mm dia, complete all as specified and directed.
S&F in repair PVC SWR bends of 75mm dia, complete all as specified and directed.
Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing existing surfaceswitches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light fittings and fixture as per Sch of credit and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and directed by Engineer-in-charge.
M&L for point wiring for light/fan point with 1.5 Sqmm (nominal area) FRLS PVC insulated sheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in existing sunken pressed steel boxes duly painted with anti corrosive paint withnew plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge.
All as per srl item No. 140 here in before but for one socket outlet 5 Amps on independent board complete all as specified.
All as per srl item No. 140 here in before but for one socket outlet 5 Amps on the same board controlled complete all as specified.
All as per srl item No. 140 here in before but for one bell point controlled by one bell push complete all as specified.
All as per srl item No. 140 here in before but for one light point controlled by two way switches complete all as specified.
All as per srl item No. 140 here in before but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, multistranded copper conductor single core FRLS cable, drawn through as existing surface conduit/ concealed conduit/ casing/capping and accessories and terminated in sunk type pressed steel terminal switch boxes duly painted with one coat of anti corrosine paint as specified with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished brass screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point/fan point controlled by one switch one way.
All as per srl item No. 146 here in before but for one bell point controlled by one bell push complete all as specified.
All as per srl item No.146 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified.
All as per srl item No. 146 here in before but for one socket outlet 5 Amps on independent board complete all as specified.
All as per srl item No. 146 here in before but one light point controlled by two way switches complete all as specified.
All as per srl item No. 146 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.
S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.
S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.
S&F switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.
S&F socket out let 5 Amp, 3 pin flush type complete all as specified.
S&F Socket outlet multi purpose 3 pin, 6 and 16 Amps, flush type complete all as specified.
Supply and fix Bell push, flush type, 5 amp complete all as specified.
Supply & Fix Bell electric AC (Ding Dong) 240 volt SP complete all as specified.
Supply & fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.
S&F ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.
S&F in repair five step fan regulator, electronic type, single phase, including connection complete all as specified.
Attending day to day complaints of no supply in light circuit or power circuit due to burning/disconnecting of any wire i.e. neutral/ phase, loose connection at switch, socket, MCB and tripping of MCB complete incl diagnosing, rectification of fault, any petty repair required to restore the electric supply for checking of existing electrical items for continuous electric supply including carrying out minor repairs with materials such as changing of fuse, small pieces of wires upto 1 mtr etc, tightening of loosen electric connections, nuts, bolts screws in switches, sockets, switch board, ceiling fans/ exhaust fans and carying out major repairs with replacement of circuits, sub circuits, halfwire for any light/fan socket circuit by replacement of items required to make the circuit functional during 0900 Hrs to 1700 Hrs by deploying electrician alongwith helper including necessary tools complete all as specified and directed.
Notes:- (a) Repairs/ faults in any one quarter upto 8 points/ one circuit shall be considered as one complaint (one measuring unit) even if repair is involved in more than one light point or fitting of one circuit. (b) Repairs/ faults in any one quarter upto 8 points/ one occupancy shall be considered as one complaint (one measuring unit) even if repair is involved in more than one light point or fitting. However, all fitting/ fixtures replaced shall be measured & paid. (c) Number of complaints may vary day to day. Contractor shall quote his rates accordingly. (d) In case of failure on the part of contractor for attending complaints a penalty shall be imposed and recovered as specified in Particular Specifications. (e) Contractor shall ensure that the deployed electrician & helper will carry functional and live mobile phone while on duty and will be on contact with JE/ Engineer-in-Charge. (f) Contractor shall be responsible for collection of all ON LINE complaints and handing over the same to JE E/M after rectification duly signed by user with details of stores fixed and to put the status ON LINE after attending/ complete of the job. (g) Replacement of electrical fittings/ fixtures shall be measured and paid for separately under respective items
S&F in repair switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete including taking down old unserviceable all as specified.
S&F in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete including taking down old unserviceable all as specified.
S&F in repair switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete including taking down old unserviceable all as specified.
S&F in repair socket out let 5 Amp, 3 pin flush type complete including taking down old unserviceable all as specified.
S&F in repair Socket outlet multi purpose 3 pin, 6 and 16 Amps, flush type complete including taking down old unserviceable all as specified.
Supply and fix in repair Bell push, flush type, 5 amp complete including taking down old unserviceable all as specified.
Supply & Fix in replacement Bell electric AC (Ding Dong) 240 volt SP complete including taking down old unserviceable all as specified.
Supply & Fix in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including taking down old unserviceable all as specified and directed.
S&F in repair ceiling rose surface type bakelite 65 x 50mm three terminal complete including taking down old unserviceable all as specified.
S&F in repair five step fan regulator, electronic socket type, single phase, including connection complete including taking down old unserviceable all as specified.
M&L for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through new PVC rigid non metallic conduit (medium grade ISI marked) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm PVC insulated with green insulation complete all as specified. NOTE: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC conduit shall be measured as one unit.
M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade ISI marked) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm PVC insulated with green insulation with any type of civil wk involved complete all as specified. NOTE:Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC conduit shall be measured as one unit.
M&L in replacement for sheet metal DB for MCBs, SPN, 8 ways, double door,single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs, blanking strips etc complete all as specified. Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells/ Hager/ L&T/ Siemens
M&L in replacement for sheet metal DB for MCBs, SPN, 12 ways, double door,singal phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells/ Hager/ L&T/ Siemens
Supply & Fix in repair MCB SP 6 to 32 Amps, 10 KA, B curve complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair MCB SPN 32 Amps, 10 KA, B curve complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair MCB SPN 40 Amps, 10 KA, B curve complete all as specified and directed by Engr-in-charge.
S & F in repair energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved.all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.Notes for 44 (i) If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account. (ii) PCC chamber shall be constructed at least 1.5m away from on the earth pit electrode and pipe of watering shall be provided in slanting manner.
Supply and fixing in repair energy saving bulk head light luminaire with opal diffuser LED 9 watt 6000 K, power factor more than 0.90, IP-65 class-I protection with high efficiency BIS marked LED electronic driver, surge protection 2 KV, operative on 140 volts to 270 volts AC supply complete prewired, connecting and testing complete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified & directed by Engineer-in- charge.
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply and Fix in repair TPN double door DB 6 way with earth Bus Bars, Neutral Links, blanking plates confirming to HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engr-in-charge.
Supply and Fix in repair TPN double door DB 4 way with earth Bus Bars, Neutral Links, blanking plates confirming to HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair miniature circuit breaker (MCB) 415V 10KA 'B' curve TPN 63 AMP complete with connection testing and commissioning.
Supply and fixing in repair miniature circuit breaker (MCB) 415V 10KA TPN 100 AMP complete with connection testing and commissioning.
Supply and fixing in repair for sunken pressed sheet terminal switch outlet box of size 8"x10" made out of sheet steel of speecified thickness complete with necessary civil work included to remove old box, fix the new box and making good the disturbed surfaces all as specified and directed
Supply and fixing in repair for sunken pressed sheet terminal switch outlet box of size 4"x 7" made out of sheet steel of speecified thickness complete necessary civil work included to remove old box, fix the new box and making good the disturbed surfaces all as specified and directed
Supply and fixing in repair for sunken pressed sheet terminal switch outlet box of size 4"x 4" made out of sheet steel of speecified thickness complete necessary civil work included to remove old box, fix the new box and making good the disturbed surfaces all as specified and directed
Fixing only serviceable light fittings any type and any description obtained from item no 1, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.
Supply and fixing in repairs condenser 2.50 MFD including taking down existing complete all as specified.
Supply and fixing in repairs condenser 3.15 MFD including taking down existing complete all as specified.
Supply and fixing in replacement plastic laminated bakelite sheet top cover 3mm thick make hylum of size 9 x 11 inches or equivalent fixed with nickel polished screws with washers including making hole as per site requirement including disconnecting copper/alu wire connections and taking out old sheet and opening of serviceable switches, sockets, regulator from existing sheet and fixing on new sheet, making connections complete all as specified and directed
All as per srl item No. 195 here-in-before but 5 x 5 inches
All as per srl item No. 195 here-in-before but 8 x 5 inches
Supply and fixing in replacement FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm single core complete drawn through existing conduit any type to utilize as half, circuit of specified colour to use as Phase, neutral, earth including taking down existing wire any type all as specified.
Supply and fixing in replacement FRLS PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm single core complete including taking down existing wire any type all as specified.
Supply and fixing in replacement FRLS PVC insulated unsheathed multi stranded copper conductor of size 4 Sqmm single core complete including taking down existing wire any type all as specified.
Supply and Fix in repair PVC casing capping of size 25mm (ISI marked) all as specified and direccted by Engineer in charge
Supply and Fix in repair PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories all as specified and direccted by Engineer in charge
Supply & fixing in repair MCCB FP 63 Amp, 415 Volts with adjustable thermal fixed magnetic release upto 16 KA breaking capacitysuitable for vertical loadline DB all as specified and directed
Material & labour for fabricated sheet metal frame of size 110cm x 80cm made of 2 mm thick CRCA sheet double leaf/ door hinged door with MS angle iron frame has made of 40x40x5mm duly powder coated suitable for fix in wall with removing existing DB and meters with wiring and repairing of niche by making modification by increasing niche size suitable for frame. with any type of civil work i.e brick work, plastering etc white wash adn making good as existing size and refixing of DB's and meter box complete.
M&L for LED driver suitable for 25 to 35 watt LED security light suitable for 220V all as speciifed and directed.
S&F in repair Decorative wall mounting light fitting suitable for 09 watt LED lamp complete with glass shade including 1 x 09 watt LED lamp complete all as specified. Notes for Srl item No 25 to 68 : (i) Contractor will get make and sample approval of items reqd to be replaced mentioned at Sr no 25 to 68 and will hand over after placing work order to JE incharge with all PV & TC to ensure availbilty when reqd during currency of contract and these items/ material will be issued by JE E/M daily in complaint cell on actual assessment of complaints to replace the defective prt and for accounting of items. The contractor will maintain register regarding details of daily complaints recd, pending, rectified, items replaced on daily basis duly signed by contractor, JE etc. (ii) The item Srl No. shall be executed on daily basis for attending complaints. Hence, contractor shall qoute his rate accordingly. (iii) Old retrieved material shall be deposited in AGE E/M yard/ E/M wksp on same day and will be given to contractor only at the time of RAR after necessary recovery under Sch of Credit.
SARASWATI CONSTRUCTION CO
JAGDISH KUMAR SEHGAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .