Construction of Balance work of Rajkiya Pashudhan Evam Krishi Prakshetra, Bhrari, Jhansi

Amount

Civil Work (Labour With Material)

Supplying and filling of lose earth in campus area

Electrical Work (Labour With Material)

Wring point for light with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside Modular type switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect.

Wring point for plug with 1.5 Sq. mm FRPVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular type switch & socket etc. complete in all respect.

Supply & wiring of submains with two number 2.5 sqmm PVC insulated multi stand copper conductor cable in 20mm dia heavy duty PVC conduit with 1 no. 1.5sqmm FR PVC insulated multistrend copper counductor cable inside the coundute complete in all respect.

Supply & wiring of submains with four number 2.5 sqmm PVC insulated multi stand copper conductor cable in 20mm dia heavy duty PVC conduit with 1 no. 1.5sqmm FR PVC insulated multistrend copper counductor cable inside the coundute complete in all respect.

Supply & wiring of submains with two number 6.0 sqmm PVC insulated single core copper conductor cable in 25mm dia heavy duty PVC conduit with 1 no. 4 sqmm FR PVC insulated multistrend single core copper counductor cable as earth continulty wire deawn inside the coundute complete in all respect.

Supply & burying of Earthing Electrode T-19 (Hot Dip Galvanized), Length 3000mm, Outer pipe 50mm, inner pipe 25, Terminal dia 12mm, Outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystllingnce conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm squre C.I. frame with hinged cove & masonty housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified.

S/L of G.I. strip 25mm x 3mm

S/F of 6Amp. To 32 amp. SPMCB (10 KA) CAT - B

S&F of 40Amp DPMCB (10KA). CAT -B

S&F surface/flush mounting 8 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT -B

S/F of LED tube light with batton suitable for up to 1X22 watt LED tube light fitting including tube on surface complete in all respect … CAT-AAA

S&F of Power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

S& F LED street light fitting having die cast aluminum body anddiffuser with driver setsuitable for 75 to 90 watt. Conferming to IP 66 and above protection complete in all respect CAT -AAA

S/F OF LED bulb 9 watt

S/Laying of 'Al' conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer - Incharge, complete in all respect. The armouring of the cable ahsll be properly connected with the earth conductor by clamps etc. 16sq mm 2 core

M/S U K Engineers